USGS - science for a changing world

Science Features

Maps, Imagery, and Publications Hazards Newsroom Education Jobs Partnerships Library About USGS Social Media
 
Science Features
: Top Story
Building Stones of Our Nation’s Capital

The Building Stones of Our Nation’s Capital

U.S. Capitol during the 2009 inauguration. Photo by T Adams, courtesy of the National Park Service.

As the country turns its eyes to D.C. to witness the inauguration of a President, the USGS reflects on the geology that helps make our capital the most impressive city in the United States.

The history of Washington, D.C., revolves around stone.  All of the most iconic landmarks in our nation’s capital—from the U.S. Capitol to the Washington Monument—have a rich geological history and tell centuries-old tales of our ancestors.

But have you ever wondered how our nation’s capital was built?

 

 

 

 

 

The White House and the U.S. Capitol

Smithsonian Castle in DC. Photo by Eric Long, Smithsonian Institution.

The two landmarks that are arguably the most recognizable, the home of the President and the home of Congress, are both made of the same material: Aquia Creek sandstone. This stone, also known as “freestone,” was a popular building material in the early 19th century and was personally selected by George Washington as the building stone of many early government buildings. At the government’s request, the architect Pierre L’Enfant purchased a quarry of this stone in 1791 about 40 miles south of Washington. (L’Enfant is best remembered as the man selected to design our capital city and as the man who lent his name to Washington’s L’Enfant Plaza.) Much of the stone from this quarry, which was deposited during the Early Cretaceous (between 100 and 140 million years ago), was used in the construction of D.C.’s most famous government buildings, including the White House, the U.S. Capitol and the U.S. Treasury.

But the Aquia Creek sandstone didn’t hold up to weathering processes very well.  After British troops ransacked the city in 1814 and burned the White House and the U.S. Capitol, the walls of the White House that were built of Aquia Creek sandstone had visible cracks and damage. Despite attempts to cover up the damage with whitewash, it became apparent to architects of the day that it would be better not to use Aquia Creek sandstone in constructing buildings of the capital city. The last known use of Aquia Creek sandstone was in several gatehouses built near the U.S. Capitol, most recently in 1827.

Despite freestone falling out of favor, it is still clearly noticeable during a tour of Washington’s historic buildings. In the U.S. Capitol, the rooms adjoining the Rotunda—including Statuary Hall—display this stone in their walls and columns. In addition, the column in the small Rotunda, and many of the Doric columns of the Crypt, are made of Aquia Creek sandstone. Finally, one of the gatehouses and three gateposts of the U.S. Capitol are made of Aquia Creek sandstone. These are located between 15th and 17th Streets, NW, at the intersection with Constitution Avenue.

The Smithsonian Castle

First and second construction phases of the Washington Monument in DC. Photo courtesy of the National Park Service.

The main building of the Smithsonian Institution, also known as the “Castle,” was built during the “brownstone” era of the mid-19th century when red Seneca sandstone was a popular building material in Washington, D.C. This stone was more resilient than Aquia Creek sandstone in handling adverse weather conditions. Red Seneca sandstone, deposited during the Triassic more than 200 million years ago, comes in a range of colors from reddish-brown to a deeper purplish-brown; the stone attains a darker hue after it is quarried and exposed to the air.

The most well-known quarry that supplied this stone to the Washington area is located on the Maryland shore, about 20 miles from D.C. up the Potomac River where it intersects with Seneca Creek.  This quarry provided the red Seneca sandstone used to build the Smithsonian Castle.  The Castle, built in the late 1840’s and 1850’s, was originally a lilac-gray color but after years of oxidation, the sandstone altered to a dark red. This material can also be found on the doorframes in the U.S. Capitol Rotunda, as well as throughout the floors of the Capitol, all of which were built from the same red Seneca sandstone during the brownstone era of the mid-1800s.

The Washington Monument

Perhaps the most noticeable variation in a D.C. landmark building material is visible in the sides of the Washington Monument, which is built from three distinct types of marble quarried in Maryland.

In 1848, when construction began on the Monument, marble had replaced sandstone as Washington’s preferred building stone. In the Monument’s first six years of construction, workers built it to a height of 152 feet using marble from a quarry just north of Baltimore in Texas, Md.  The Monument was funded by donations from members of the public who wished to honor George Washington’s legacy, but in 1854 construction stopped as funding ran out. After the Civil War, when construction began again in 1876, the builders opted to use marble from a quarry in Sheffield, Mass. Yet, four years later, after encountering issues with the quality and timely delivery of the marble from Sheffield, the contract was annulled. The remainder of the Monument was constructed using marble from a local quarry in Cockeysville, Md. The Monument was finished in 1884 and rose to a remarkable height of 555 feet and 5 inches.

The three types of marble used in the Monument can be clearly discerned, even from a distance. The Monument’s lower section, built of nearly pure calcium carbonate marble from the quarry in Texas, Md., is the whitest and coarsest. The middle section, built of the marble from Sheffield, Mass., is a pronounced white marble but is only four rows of stone. The upper section is, by far, the largest expanse. It is built of marble from the quarry in Cockeysville, Md.; this section’s higher magnesium content gives it a pale gray hue. The upper-most section of the Monument was notably damaged during an earthquake in central Virginia in August 2011. Repairs continue on the Monument, with the National Park Service hoping for it to reopen in 2014.

So next time, you are in D.C., take some time to admire the stones of these world-famous landmarks and know that since they were built, generations have come and gone, but the stones that built our nation’s monuments, memorials and government buildings endure.

This information is based on a more extensive USGS publication, Building Stones of Our Nation’s Capital.

Aquia Creek Sandstone. Photo by Laura Corey, USGS.

Receive news and updates:

RSS Twitter Facebook YouTube

Accessibility FOIA Privacy Policies and Notices

Take Pride in America logo USA.gov logo U.S. Department of the Interior | U.S. Geological Survey
URL: www.usgs.gov/blogs/features/usgs_top_story/building-stones-of-our-nations-capital/?from=image
Page Contact Information: Ask USGS
Page Last Modified: November 7, 2013