×

Error message

An illegal choice has been detected. Please contact the site administrator.

The USGS monitors and conducts research on a wide range of natural hazards to help decision-makers prepare for and respond to hazard events that threaten life and property.

Filter Total Items: 208
Image: Damaged Building
Try the Multidisciplinary Center for Earthquake Engineering Research website for that information.
Damage to a house from and earthquake
You should consider the following factors when deciding whether or not to get earthquake insurance: proximity to active earthquake faults seismic history of the region (frequency of earthquakes) time since last earthquake building construction (type of building and foundation) architectural layout materials used quality of workmanship extent to...
Damage to buildings in Cushing, Oklahoma from the magnitude 5.0 earthquake on November 6, 2016
Published maps will only provide generalized, uninterpreted information about specific areas. Every property consists of a unique combination of geologic and structural factors that must be considered to determine what might happen to a house during an earthquake. Therefore, an individual site study is necessary. Geologic factors include: type of...
2014 South Napa Earthquake in California
Determining your risk with regard to earthquakes, or more precisely shaking from earthquakes, isn't as simple as finding the nearest fault. The chances of experiencing shaking from an earthquake and/or having property damage is dependent on many different factors. The National Hazard Maps use all available data to estimate the chances of shaking (...
 2014 USGS National Seismic Hazard Map, displaying intensity of potential ground shaking from an earthquake in 50 years (which i
Seismic hazard is the hazard associated with potential earthquakes in a particular area, and a seismic hazard map shows the relative hazards in different areas. The maps are made by considering what we currently know about: Past faults and earthquakes The behavior of seismic waves as they travel through different parts of the U.S. crust The near-...
USGS scientists conduct passive seismic study in the Washita Reach 1 study area.
A seismic zone could be one of three things: A region on a map in which a common level of seismic design is required. This concept is obsolete. An area of seismicity probably sharing a common cause. Example: "The New Madrid Seismic Zone." A region on a map for which a common areal rate of seismicity is assumed for the purpose of calculating...
USGS map displaying potential to experience damage from a natural or human-induced earthquake in 2017
In a few cases, yes, but in most cases no.  Only a few of the over 2000 magnitude 3 and larger earthquakes since 2009 that have occurred in Oklahoma have been connected to hydraulic fracturing. The majority of earthquakes in Oklahoma are caused by the industrial practice​ known as "wastewater disposal". Wastewater disposal is a ​separate ​process...
Installation of seismometers to monitor seismicity
USGS supports both internal and external (university-based) research on the causes of induced earthquakes. This research focuses on injection-induced earthquakes, including from wastewater disposal, enhanced geothermal technologies, and at carbon dioxide sequestration sites. USGS and its university partners have also deployed seismometers at sites...
Image: Bakken Oil Well
To produce natural gas from shale formations, it is necessary to increase the interconnectedness of the pore space (permeability) of the shale so that the gas can flow through the rock mass and be extracted through production wells. This is usually done by hydraulic fracturing ("fracking"). Fracking causes extremely small earthquakes, but they are...
Research has identified 17 areas in the central and eastern United States with increased rates of induced seismicity.
So far, there is no conclusive example linking injection operations to triggering of major earthquakes; However, we cannot eliminate this possibility.
Simulation of fluid pressure increases from injection into a reservoir over time.
No. Given enough time, the pressure increase created by injection can migrate substantial horizontal and vertical distances from the injection location. Induced earthquakes commonly occur several kilometers below the injection point. In some cases, the induced earthquakes have been located more than 6 miles from the injection well and have been 2....
Epicenter of the Oklahoma 5.6 earthquake on Sept 3, 2016
The largest earthquake induced by fluid injection that has been documented in the scientific literature was the November 6, 2011 earthquake in central Oklahoma.  It had a magnitude of 5.6.  Earlier that year, a magnitude 5.3 earthquake was induced by fluid injection in the Raton Basin, Colorado.  Earthquakes with magnitudes between 4.5 and 5.0...