Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
What does the term UTM mean? Is UTM better or more accurate than latitude/longitude?
UTM is the acronym for Universal Transverse Mercator, a plane coordinate grid system named for the map projection on which it is based (Transverse Mercator). The UTM system consists of 60 zones, each 6-degrees of longitude in width. The zones are numbered 1-60, beginning at 180-degrees longitude and increasing to the east. The military uses their own implementation of the UTM system, called the Military Grid Reference System (MGRS).
One system is no more or less accurate than the other. They are just two different ways of positioning a point. Many experienced users prefer UTM over latitude/longitude when using 7.5' topographic quadrangle maps. Ocean-going sailors and other marine users almost always use latitude/longitude because navigation charts are optimized for this method.
Learn more: The Universal Transverse Mercator (UTM) Grid
Sources/Usage: Public Domain. View Media Details
Related Content
How are UTM coordinates measured on USGS topographic maps?
The UTM ( Universal Transverse Mercator ) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 19, which includes Maine. If UTM ticks are shown on a USGS topographic map, the zone is indicated in the credit legend...
Why don't U.S. Forest Service Visitor maps have Universal Transverse Mercator (UTM) grids?
The Universal Transverse Mercator (UTM) grid is not used on the Forest Service Visitor Map series because of the maps’ small scale and intended use. The more detailed Wilderness maps and Special Area maps published by the Forest Service might have UTM grid ticks. UTM grids are included on all US Topo maps (7.5-minute, 1:24,000-scale) published by the USGS after 2010. Order paper maps for...
Do all USGS 7.5 minute topographic maps show the UTM grid?
Historical Topographic Map Collection (1884-2006) : The USGS policy about putting a full UTM grid on 7.5-minute (1:24,000-scale) topographic maps has changed over time. Beginning in the mid-1950s, the grid was indicated by blue ticks around the map at 1,000-meter spacing. In 1979, the ticks were replaced with a full-line black UTM grid. This decision was reversed in 1992, then reversed again in...
Why do Landsat scenes in the Southern Hemisphere display negative UTM values?
Traditional Universal Transverse Mercator (UTM) convention distinguishes between the Northern and Southern Hemispheres. In the Northern Hemisphere, the UTM zone is a positive value or identified as UTM North. In the Southern Hemisphere, the UTM zone is a negative value or identified as UTM South. UTM North scenes in this convention have a false northing value of 0, while UTM South scenes have a...
PubTalk 11/2010 — Silicon, Software, and Science
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
PubTalk 11/2004 — From Plane Tables to Pixels
The Revolution in Mapping at the U.S. Geological Survey
by Susan P. Benjamin, Research Geographer
The Revolution in Mapping at the U.S. Geological Survey
by Susan P. Benjamin, Research Geographer
Related Content
- FAQ
How are UTM coordinates measured on USGS topographic maps?
The UTM ( Universal Transverse Mercator ) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 19, which includes Maine. If UTM ticks are shown on a USGS topographic map, the zone is indicated in the credit legend...
Why don't U.S. Forest Service Visitor maps have Universal Transverse Mercator (UTM) grids?
The Universal Transverse Mercator (UTM) grid is not used on the Forest Service Visitor Map series because of the maps’ small scale and intended use. The more detailed Wilderness maps and Special Area maps published by the Forest Service might have UTM grid ticks. UTM grids are included on all US Topo maps (7.5-minute, 1:24,000-scale) published by the USGS after 2010. Order paper maps for...
Do all USGS 7.5 minute topographic maps show the UTM grid?
Historical Topographic Map Collection (1884-2006) : The USGS policy about putting a full UTM grid on 7.5-minute (1:24,000-scale) topographic maps has changed over time. Beginning in the mid-1950s, the grid was indicated by blue ticks around the map at 1,000-meter spacing. In 1979, the ticks were replaced with a full-line black UTM grid. This decision was reversed in 1992, then reversed again in...
Why do Landsat scenes in the Southern Hemisphere display negative UTM values?
Traditional Universal Transverse Mercator (UTM) convention distinguishes between the Northern and Southern Hemispheres. In the Northern Hemisphere, the UTM zone is a positive value or identified as UTM North. In the Southern Hemisphere, the UTM zone is a negative value or identified as UTM South. UTM North scenes in this convention have a false northing value of 0, while UTM South scenes have a...
- Multimedia
PubTalk 11/2010 — Silicon, Software, and Science
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
Monitoring the Earth's Landscape with Low-Cost High-Tech
by Rian Bogle, Remote Sensing Specialist
PubTalk 11/2004 — From Plane Tables to PixelsThe Revolution in Mapping at the U.S. Geological Survey
by Susan P. Benjamin, Research Geographer
The Revolution in Mapping at the U.S. Geological Survey
by Susan P. Benjamin, Research Geographer
- Publications
- News