# What was the duration of the earthquake? Why don't you report the duration of each earthquake? How does the duration affect the magnitude?

The duration of an earthquake is related to its magnitude but not in a perfectly strict sense. There are two ways to think about the duration of an earthquake. The first is the length of time it takes for the fault to rupture and the second is the length of time shaking is felt at any given point (e.g. when someone says "I felt it shake for 10 seconds" they are making a statement about the duration of shaking). The duration of fault rupture is related to both how long it takes for a spot on the fault to slip (which seems to be quite fast) and the time it takes rupture to proceed along a fault.

You have to think of an earthquake as an area on a fault rather than just a point. It starts at a point and then the rupture propagates along the fault at around 2 kilometers or so per second. So the larger the area of the fault that ruptures, the longer the duration of the earthquake. And larger magnitude earthquakes have larger fault areas. So there is a general relationship between duration and magnitude.

The reason we don't list this sort of duration on the Latest Earthquake website is that figuring out how long an earthquake took to rupture is still a research project that takes some time rather than an automated process. The duration of shaking at a point on the ground depends on how long the earthquake took to occur and how the waves move through the ground to that point. If there are a lot of reflections and resonances near the point (for instance in a sedimentary valley), the shaking will last longer. In an area without resonances (for instance on a hard block of rock), it will last a shorter time.

You must also specify a duration of shaking over a given level. We can actually detect the shaking from the very largest earthquakes for weeks after they occur, but no one would say that they felt it for that long. So the duration of shaking is a very complex topic. We actually do use the duration of shaking to estimate the magnitude for some small earthquakes. If you see a "Md" or "duration magnitude" on the Latest Earthquake webpages, this is what has been done.

For an explanation see Magnitude. This is much like having someone yell, counting the echos, and then estimating how loud they yelled from how many echos you could hear. Finally, the damage to a given structure will depend both on the amplitude of the shaking and its duration. How to best combine these quantities into an estimate of the amount of damage is ongoing research. (contributed by Andy Michael)

## Related Content

Filter Total Items: 11

### What is a Geoid? Why do we use it and where does its shape come from?

Contrast of the Geoid model with an Ellipsoid and cross-section of the Earth's surface. (Public domain.) A geoid is the irregular-shaped “ball” that scientists use to more accurately calculate depths of earthquakes, or any other deep object beneath the earth’s surface...

### Seismometers, seismographs, seismograms - what's the difference? How do they work?

A seismometer is the internal part of the seismograph , which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph". Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a...

### How can I make my own seismometer?

It is relatively easy to acquire the necessary materials and build your own seismometer. The links here are to various sources with information on how to build a seismometer. They range from very simple and inexpensive to sophisticated and pricey. Model Seismograph - Classroom Demonstration Build your own Seismograph Station Build Your Own...

### What was the first instrument that actually recorded an earthquake?

The earliest seismoscope was invented by the Chinese philosopher Chang Heng in A.D. 132. This was a large urn on the outside of which were eight dragon heads facing the eight principal directions of the compass. Below each dragon head was a toad with its mouth opened toward the dragon. When an earthquake occurred, one or more of the eight dragon-...

### How can an earthquake have a negative magnitude?

Magnitude calculations are based on a logarithmic scale, so a ten-fold drop in amplitude decreases the magnitude by 1. If an amplitude of 20 millimetres as measured on a seismic signal corresponds to a magnitude 2 earthquake, then: 10 times less (2 millimetres) corresponds to a magnitude of 1; 100 times less (0.2 millimetres) corresponds to...

### What does it mean that the earthquake occurred at a depth of 0 km? How can an earthquake have a negative depth; that would mean it’s in the air. What is the geoid, and what does it have to do with earthquake depth?

An earthquake cannot physically occur at a depth of 0 km or -1km (above the surface of the earth). In order for an earthquake to occur, two blocks of crust must slip past one another, and it is impossible for this to happen at or above the surface of the earth. So why do we report that the earthquake occurred at a depth of 0 km or event as a...

### How do seismologists locate an earthquake?

When an earthquake occurs, one of the first questions is "where was it?" The location may tell us what fault it was on and where damage (if any) most likely occurred. Unfortunately, Earth is not transparent and we can't just see or photograph the earthquake disturbance like meteorologists can photograph clouds. When an earthquake occurs, it...

### How are earthquakes recorded? How are earthquakes measured? How is the magnitude of an earthquake determined?

Earthquakes are recorded by a seismographic network . Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy...

### Moment magnitude, Richter scale - what are the different magnitude scales, and why are there so many?

Earthquake size, as measured by the Richter Scale is a well known, but not well understood, concept. The idea of a logarithmic earthquake magnitude scale was first developed by Charles Richter in the 1930's for measuring the size of earthquakes occurring in southern California using relatively high-frequency data from nearby seismograph stations...

### What is the difference between earthquake magnitude and earthquake intensity? What is the Modified Mercalli Intensity Scale?

Magnitude scales , like the moment magnitude, measure the size of the earthquake at its source. An earthquake has one magnitude. The magnitude does not depend on where the measurement is made. Often, several slightly different magnitudes are reported for an earthquake. This happens because the relation between the seismic measurements and the...

### How do you determine the magnitude for an earthquake that occurred prior to the creation of the magnitude scale?

For earthquakes that occurred between about 1890 (when modern seismographs came into use) and 1935 when Charles Richter developed the magnitude scale, people went back to the old records and compared the seismograms from those days with similar records for later earthquakes. For earthquakes prior to about 1890, magnitudes have been estimated by...
Filter Total Items: 3
Date published: May 25, 2017

### Updated USGS Earthquake Monitoring Strategy Released

The USGS Earthquake Hazards Program recently released a new strategic plan for earthquake monitoring entitled the “Advanced National Seismic System – Current Status, Development Opportunities, Priorities, 2017-2027.”

Date published: January 23, 2012

### A 100-year-long History of Earthquakes and Seismic Monitoring in Hawaii

The Hawaiian Volcano Observatory’s 1912–2012 Centennial—100 Years of Tracking Eruptions and Earthquakes

HAWAI‘I ISLAND, Hawaii —The history of earthquakes and seismic monitoring in Hawai‘i during the past century will be the topic of a presentation at the University of Hawai‘i at Hilo on Thursday, January 26, at 7:00 p.m.

Date published: September 24, 2009

### Recovery Act Funds Will Upgrade Earthquake Monitoring

USGS will Grant Universities $5 Million to Beef Up Public Safety Grants totaling$5 million under the American Recovery and Reinvestment Act are being awarded to 13 universities nationwide to upgrade critical earthquake monitoring networks and increase public safety.

Filter Total Items: 8
February 28, 2017

### USGS Forecast for Ground Shaking Intensity from Earthquakes in 2017

USGS map displaying intensity of potential ground shaking from natural and human-induced earthquakes. There is a small chance (one percent) that ground shaking intensity will occur at this level or higher. There is a greater chance (99 percent) that ground shaking will be lower than what is displayed in these maps.

October 11, 2016

### Population Exposed to Potentially Damaging Earthquake Groundshaking

USGS map showing (1) the locations of major populations and (2) the intensity of potential earthquake ground shaking that has a 2% chance of occurring in 50 years.

August 31, 2016

March 15, 2016

### HayWired Scenario ShakeMap

ShakeMap showing intensity of shaking for the HayWired Scenario.
See:  http://earthquake.usgs.gov/earthquakes/shakemap/global/shake/haywiredm7....

### Shake map for a magnitude 7.0 earthquake on the Hayward fault

Shake map for a magnitude 7.0 earthquake on the Hayward fault with the eipicenter of earthquake near Oakland, Calfornia.

### Amplified Ground Shaking from Earthquakes

This graphic demonstrates that ground shaking from earthquakes is amplified at sites with sediment compared to those with harder bedrock. The upper panel shows ground shaking at bedrock and sediment sites in Washington, DC, from an earthquake in North Carolina. The lower panel shows ground shaking in DC from an earthquake in Alaska.

### Scenario Earthquake Map

Interactive map showing earthquake scenario data