An official website of the United States government. Here's how you knowHere's how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock () or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Latest Earthquake | Chat Share
The passage of Hurricane Matthew during October 7–9, 2016, resulted in heavy rainfall that caused major flooding.
The peak stages and streamflows that occurred following Hurricane Matthew are documented in a USGS Open-File report published in December 2016 by the USGS South Atlantic Water Science Center.
The passage of Hurricane Matthew across the central and eastern regions of North Carolina and South Carolina during October 7–9, 2016, resulted in heavy rainfall that caused major flooding in parts of the eastern Piedmont in North Carolina and coastal regions of both States. Rainfall totals of 3 to 8 inches and 8 to more than 15 inches were widespread throughout the central and eastern regions, respectively.
U.S. Geological Survey streamgages recorded peaks of record at 26 locations, including 11 sites with long-term periods of 30 or more years of record. A total of 44 additional locations had peak streamflows that ranked in the top 5 for the period of record. Additionally, among 23 U.S. Geological Survey streamgages within the affected basins in North Carolina where stage-only data are collected, new peak stages were recorded at 5 locations during the flooding. U.S. Geological Survey personnel made 102 streamflow measurements at 60 locations in both States to verify, update, or extend existing rating curves (which are used to determine stage-discharge relations) during the October 2016 flood event.
The peak stages and streamflows that occurred following Hurricane Matthew are document in a USGS Open-File report published in December 2016 by the USGS South Atlantic Water Science Center.