Skip to main content
U.S. flag

An official website of the United States government

Evaluation of mean velocity and turbulence measurements with ADCPs

January 1, 2007

To test the ability of acoustic Doppler current profilers (ADCPs) to measure turbulence, profiles measured with two pulse-to-pulse coherent ADCPs in a laboratory flume were compared to profiles measured with an acoustic Doppler velocimeter, and time series measured in the acoustic beam of the ADCPs were examined. A four-beam ADCP was used at a downstream station, while a three-beam ADCP was used at a downstream station and an upstream station. At the downstream station, where the turbulence intensity was low, both ADCPs reproduced the mean velocity profile well away from the flume boundaries; errors near the boundaries were due to transducer ringing, flow disturbance, and sidelobe interference. At the upstream station, where the turbulence intensity was higher, errors in the mean velocity were large. The four-beam ADCP measured the Reynolds stress profile accurately away from the bottom boundary, and these measurements can be used to estimate shear velocity. Estimates of Reynolds stress with a three-beam ADCP and turbulent kinetic energy with both ADCPs cannot be computed without further assumptions, and they are affected by flow inhomogeneity. Neither ADCP measured integral time scales to within 60%. ?? 2007 ASCE.

Publication Year 2007
Title Evaluation of mean velocity and turbulence measurements with ADCPs
DOI 10.1061/(ASCE)0733-9429(2007)133:12(1310)
Authors E.A. Nystrom, C.R. Rehmann, K. A. Oberg
Publication Type Article
Publication Subtype Journal Article
Series Title Journal of Hydraulic Engineering
Index ID 70031213
Record Source USGS Publications Warehouse