Lauren T Reid
Lauren Reid is a Chemist at the USGS Reston Stable Isotope Laboratory.
Science and Products
Stable hydrogen and oxygen isotopic compositions of precipitation samples from selected Colorado and Utah National Atmospheric Deposition Program (NADP) sites
The stable hydrogen (delta 2H) and oxygen (delta 18O) isotopic compositions of more than 4,300 weekly composite samples of precipitation from thirteen National Atmospheric Deposition Program (NADP) sites (CO02, CO08, CO09, CO10, CO21, CO89, CO91, CO92, CO93, CO96, CO97, CO98, and UT09) in Colorado and Utah were analyzed on archived samples obtained from NADP over various time periods between Janua
Stable hydrogen and oxygen isotopic compositions of precipitation samples from selected Delaware, Maryland, New Jersey, New York, and Pennsylvania National Atmospheric Deposition Program (NADP) sites
The stable hydrogen (delta 2H) and oxygen (delta 18O) isotopic compositions of more than 6,400 daily or weekly composite samples of precipitation from nine National Atmospheric Deposition Program (NADP) sites (DE02, MD07, NJ99, NY67, NY68, PA00, PA15, PA72, and PA98) in New York, New Jersey, Delaware, Maryland and Pennsylvania were analyzed on archived samples obtained from NADP over various time
Dataset of C1-C6 Dissolved Trace Hydrocarbon Measurements in the Western "Wet Gas" Part of the Marcellus Shale Oil and Gas Play in West Virginia, U.S.A. Collected Between June and August 2018
This dataset contains measurements of dissolved hydrocarbons in from groundwater samples collected in the shale gas producing regions of West Virginia, USA, between June and August of 2018. The target analytes in this study were: methane (CH4), ethane (C2H6), ethene (C2H4), ethyne (C2H2), propane (C3H8), propene (C3H6), i-butane (C4H10), n-butane (C4H10), 1-butene (C4H8), propyne (C3H4), i-pentane
USGS46a Greenland ice core water ? A reference material for stable hydrogen and oxygen isotopic composition of water
Ice core from Greenland was melted, filtered, and homogenized. Its stable hydrogen (δ2H) and oxygen (δ18O) isotopic compositions were adjusted to approximately match those of USGS46 ice core water (δ2H = ?235.8 ? and δ18O = ?29.80 ?). This isotopic reference water, USGS46a, was loaded into glass ampules, sealed, autoclaved to eliminate biological activity, and calibrated by dual-inlet isotope-rati
Measurement of seepage at Newtown Creek, NY, May-June 2015
Rates of flow across the sediment-water interface (seepage), measured every 5 seconds with an automated seepage meter and summarized every minute with a digital datalogger, are presented for 17 measurement locations at Newtown Creek, NY. Final values are presented in cm/day. An electromagnetic seepage meter, custom made for USGS by Quantum Engineering, was capable of measuring seepage averaged eac
Data for food matrix reference materials for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements
An international project developed, quality-tested, and measured isotope-delta values of 10 new food matrix reference materials (RMs) for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements to support food authenticity testing and food provenance verification. These new RMs, USGS82 to USGS91, will enable users to normalize measurements of samples to isotope-delta scale
USGS44, a new high-purity calcium carbonate reference material for δ13C measurements
RationaleThe stable carbon isotopic (δ13C) reference material (RM) LSVEC Li2CO3 has been found to be unsuitable for δ13C standardization work because its δ13C value increases with exposure to atmospheric CO2. A new CaCO3 RM, USGS44, has been prepared to alleviate this situation.MethodsUSGS44 was prepared from 8 kg of Merck high-purity CaCO3. Two sets of δ13C values of USGS44 were determined. The f
Authors
Haiping Qi, Heiko Moossen, Harro A.J. Meijer, Tyler B. Coplen, Anita T Aerts-Bijma, Lauren T Reid, Heiko Geilmann, Jürgen Richter, Michael Rothe, Willi A. Brand, Blaza Toman, Jacqueline Benefield, Jean-François Hélie
Food matrix reference materials for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements: Collagens, flours, honeys, and vegetable oils
An international project developed, quality-tested, and measured isotope–delta values of 10 new food matrix reference materials (RMs) for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements to support food authenticity testing and food provenance verification. These new RMs, USGS82 to USGS91, will enable users to normalize measurements of samples to isotope–delta scale
Authors
Arndt Schimmelmann, Haiping Qi, Philip J.H. Dunn, Federica Camin, Luana Bontempo, Doris Potocnik, Nives Ogrinc, Simon Kelly, James Carter, Aiman Abrahim, Lauren T Reid, Tyler B. Coplen
Science and Products
- Data
Stable hydrogen and oxygen isotopic compositions of precipitation samples from selected Colorado and Utah National Atmospheric Deposition Program (NADP) sites
The stable hydrogen (delta 2H) and oxygen (delta 18O) isotopic compositions of more than 4,300 weekly composite samples of precipitation from thirteen National Atmospheric Deposition Program (NADP) sites (CO02, CO08, CO09, CO10, CO21, CO89, CO91, CO92, CO93, CO96, CO97, CO98, and UT09) in Colorado and Utah were analyzed on archived samples obtained from NADP over various time periods between JanuaStable hydrogen and oxygen isotopic compositions of precipitation samples from selected Delaware, Maryland, New Jersey, New York, and Pennsylvania National Atmospheric Deposition Program (NADP) sites
The stable hydrogen (delta 2H) and oxygen (delta 18O) isotopic compositions of more than 6,400 daily or weekly composite samples of precipitation from nine National Atmospheric Deposition Program (NADP) sites (DE02, MD07, NJ99, NY67, NY68, PA00, PA15, PA72, and PA98) in New York, New Jersey, Delaware, Maryland and Pennsylvania were analyzed on archived samples obtained from NADP over various timeDataset of C1-C6 Dissolved Trace Hydrocarbon Measurements in the Western "Wet Gas" Part of the Marcellus Shale Oil and Gas Play in West Virginia, U.S.A. Collected Between June and August 2018
This dataset contains measurements of dissolved hydrocarbons in from groundwater samples collected in the shale gas producing regions of West Virginia, USA, between June and August of 2018. The target analytes in this study were: methane (CH4), ethane (C2H6), ethene (C2H4), ethyne (C2H2), propane (C3H8), propene (C3H6), i-butane (C4H10), n-butane (C4H10), 1-butene (C4H8), propyne (C3H4), i-pentaneUSGS46a Greenland ice core water ? A reference material for stable hydrogen and oxygen isotopic composition of water
Ice core from Greenland was melted, filtered, and homogenized. Its stable hydrogen (δ2H) and oxygen (δ18O) isotopic compositions were adjusted to approximately match those of USGS46 ice core water (δ2H = ?235.8 ? and δ18O = ?29.80 ?). This isotopic reference water, USGS46a, was loaded into glass ampules, sealed, autoclaved to eliminate biological activity, and calibrated by dual-inlet isotope-ratiMeasurement of seepage at Newtown Creek, NY, May-June 2015
Rates of flow across the sediment-water interface (seepage), measured every 5 seconds with an automated seepage meter and summarized every minute with a digital datalogger, are presented for 17 measurement locations at Newtown Creek, NY. Final values are presented in cm/day. An electromagnetic seepage meter, custom made for USGS by Quantum Engineering, was capable of measuring seepage averaged eacData for food matrix reference materials for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements
An international project developed, quality-tested, and measured isotope-delta values of 10 new food matrix reference materials (RMs) for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements to support food authenticity testing and food provenance verification. These new RMs, USGS82 to USGS91, will enable users to normalize measurements of samples to isotope-delta scale - Publications
USGS44, a new high-purity calcium carbonate reference material for δ13C measurements
RationaleThe stable carbon isotopic (δ13C) reference material (RM) LSVEC Li2CO3 has been found to be unsuitable for δ13C standardization work because its δ13C value increases with exposure to atmospheric CO2. A new CaCO3 RM, USGS44, has been prepared to alleviate this situation.MethodsUSGS44 was prepared from 8 kg of Merck high-purity CaCO3. Two sets of δ13C values of USGS44 were determined. The fAuthorsHaiping Qi, Heiko Moossen, Harro A.J. Meijer, Tyler B. Coplen, Anita T Aerts-Bijma, Lauren T Reid, Heiko Geilmann, Jürgen Richter, Michael Rothe, Willi A. Brand, Blaza Toman, Jacqueline Benefield, Jean-François HélieFood matrix reference materials for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements: Collagens, flours, honeys, and vegetable oils
An international project developed, quality-tested, and measured isotope–delta values of 10 new food matrix reference materials (RMs) for hydrogen, carbon, nitrogen, oxygen, and sulfur stable isotope-ratio measurements to support food authenticity testing and food provenance verification. These new RMs, USGS82 to USGS91, will enable users to normalize measurements of samples to isotope–delta scaleAuthorsArndt Schimmelmann, Haiping Qi, Philip J.H. Dunn, Federica Camin, Luana Bontempo, Doris Potocnik, Nives Ogrinc, Simon Kelly, James Carter, Aiman Abrahim, Lauren T Reid, Tyler B. Coplen