Special topic—Eruption plumes and clouds
Introduction
Explosive eruptions create plumes of volcanic ash and gas that can rise more than 30,000 feet (9.1 kilometers [km]) above sea level within minutes of eruption onset. The resulting clouds disperse under prevailing winds and may cause hazardous conditions hundreds to thousands of kilometers from the volcano, including in international airspace. Rapid detection and characterization of explosive activity is vital to mitigate the wide-ranging effects of volcanic ash. Ashfall thicknesses as small as a millimeter or so on the ground can affect infrastructure, agriculture, and air quality, requiring extensive clean-up procedures (Schuster, 1981; Warrick and others, 1981, U.S. Geological Survey, 2022). Volcanic clouds also pose substantial threats to aircraft. Since 1953, 88 encounters between airplanes and ash clouds have been documented worldwide (International Civil Aviation Organization, 2015, appendix F), resulting in aircraft damage and, in 9 cases, engine failure (Guffanti and others, 2010). In 1982, two large passenger planes suffered complete engine failure owing to eruptions in Indonesia (Global Volcanism Program, 1982) and a similar incident occurred over Alaska in 1989 (Casadevall, 1994). In all three cases, they were able to restart some engine capability and land safely once they emerged from the ash clouds, although with substantial damage (Guffanti and others, 2010).
The clear threat to aviation has led to establishment of nine Volcanic Ash Advisory Centers (VAAC) around the world to monitor and rapidly disseminate information about volcanic eruptions to the aviation community. U.S. Geological Survey (USGS) volcano observatories issue the Volcano Observatory Notice for Aviation that informs of preeruptive unrest or eruptive activity. When ash-producing eruptions do occur, volcano observatories work closely with their regional VAAC to ensure consistency and accuracy in eruption onset time, cloud altitude, ash production, and duration as reported in Volcanic Ash Advisories. Explosive volcanism in the United States and Commonwealth of the Northern Mariana Islands prompts 50–100 such advisories in any given year (table J1). This collaborative effort is greatly aided by USGS detection and monitoring of eruption clouds to ensure a timely and coordinated response.
To support these efforts to provide guidance on ash transport and fallout, the USGS developed the Ash3d volcanic ash dispersion model (https://vsc-ash.wr.usgs.gov/ash3d-gui) (Schwaiger and others, 2012). Automated simulations are run daily by the USGS for volcanoes that are in elevated states of unrest, and in response mode when eruptions occur. During eruptions, the model output is provided to local National Weather Service Weather Forecast Offices to guide them in the issuance of their information products (such as special weather statements, ashfall advisories, or ashfall warnings), as well as to State and local governments and the public. Characterization of the eruption source is needed to estimate the parameters used to initialize the Ash3d model, and by the Anchorage and Washington VAACs to initialize other dispersion models that inform forecasts for the airborne volcanic cloud. The source parameters that can be provided by observation during an eruption include eruption start time, eruption cloud height over time, and eruption duration. Other, nonobservable source parameters, such as mass eruption rate and grain-size distribution, are based on empirical correlations and study of historical deposits. The goal is to provide a time series of cloud heights, mass eruption rates, and particle-size distributions that accurately reflects current conditions. When feasible, the USGS also provides guidance on the nature of ongoing eruptions and forecasts future activity using petrologic monitoring of collected tephra samples.
The aims of providing accurate observable parameters are achieved through analysis of (1) near-real-time meteorological satellite data, (2) ground-based cameras (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–G, 11 p., https://doi.org/10.3133/sir20245062g.">chapter G, this volume; Orr and others, 2024), (3) weather radar, (4) volcanic lightning detection, and (5) ground-based ash sensors and sampling. Explosive eruptions can be detected by a variety of geophysical monitoring, including infrasound (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–C, 11 p., https://doi.org/10.3133/sir20245062c.">chapter C, this volume; Lyons and others, 2024) and seismicity (see of Flinders, A.F., Lowenstern, J.B., Coombs, M.L., and Poland, M.P., eds., Recommended capabilities and instrumentation for volcano monitoring in the United States: U.S. Geological Survey Scientific Investigations Report 2024–5062–B, 9 p., https://doi.org/10.3133/sir20245062b.">chapter B, this volume; Thelen and others, 2024). However, those methods cannot quantify the altitude, ash content, and dispersal dynamics of resulting volcanic clouds. Ideally, all available sources of monitoring data are synthesized to develop a coherent understanding of eruptive activity. The guidance summarized here provides a framework for characterizing volcanic clouds in the atmosphere and tracking the evolution of explosive eruption dynamics.
Citation Information
Publication Year | 2024 |
---|---|
Title | Special topic—Eruption plumes and clouds |
DOI | 10.3133/sir20245062J |
Authors | David J. Schneider, Alexa R. Van Eaton |
Publication Type | Report |
Publication Subtype | USGS Numbered Series |
Series Title | Scientific Investigations Report |
Series Number | 2024-5062 |
Index ID | sir20245062J |
Record Source | USGS Publications Warehouse |
USGS Organization | Volcano Science Center |