Lava Flow Hazards Zones and Flow Forecast Methods, Island of Hawai‘i Active
Lava flows on the Island of Hawai‘i are renowned for their frequent occurrence, relatively easy access, land-building ocean entries, and for Hawaiian names that describe their surface textures—rubbly ‘a‘ā or smooth and sometimes ropey pāhoehoe.
Hawaiian lava flows generally advance slowly and can be easily avoided by people. However, lava flows can destroy everything in their paths—rainforests, buildings, roads, utility and communication systems, and whole communities. During the 1983–2018 eruption of Kīlauea Volcano at the Pu‘u ‘Ō‘ō vent, several people died because of the hazards associated with lava entering the ocean.
The likelihood that future lava flows will interfere with human activity and infrastructure increases as communities and other development encroach on Hawaii's active volcanoes. USGS scientists characterize long-term lava flow hazards based on where and how often past lava inundation has occurred. When a new lava flow erupts, scientists use different methods to estimate where and how quickly it will travel downslope.
Lava-flow hazard zones vary across the Island of Hawai‘i
The first USGS map showing volcanic hazard zones on the Island of Hawai‘i was prepared in 1974 and revised in 1987 and 1992. The latest map divides the island into 9 zones, with lava flows most likely to occur in Zone 1 and least likely in Zone 9.
Hazard zones from lava flows are based chiefly on the location and frequency of both historic and prehistoric eruptions. 'Historic eruptions' include those for which there are written records, beginning in the early 1800s, and those that are known from the oral traditions of the Hawaiians. Our knowledge of prehistoric eruptions is based on geologic mapping and dating of the old flows of each volcano. The hazard zones also take into account the larger topographic features of the volcanoes that will affect the distribution of lava flows. Finally, any hazard assessment is based on the assumption that future eruptions will be similar to those in the past. The hazard boundaries are approximate, and the change in the degree of hazard is generally gradual rather than abrupt.
The probability of future lava flows is not the same for all areas of the Island of Hawai‘i. The long-term lava-flow threat is greatest on Kīlauea and Mauna Loa, the two most active volcanoes, followed by Hualālai.
The 1992 lava flow hazard zone map is also available as a downloadable KMZ file, and you can read more about viewing it in Google Earth or as a GIS layer in the June 10, 2005, Volcano Watch article.
Please visit the Frequently Asked Questions and Answers about Lava-Flow Hazards for more information.
Lava flow forecasts based on past flows and topography
Hawaiian Volcano Observatory (HVO) scientists use two methods to forecast the path of a lava flow: broad inundation zones based on the mapped pathways of previous lava flows, and steepest descent paths based on a digital elevation model of a volcano's topography or surface. Estimates of lava flow travel times are based on known advance rates of active flows and earlier flows from within the same area.
Past lava flows define inundation zones: Mauna Loa
HVO scientists have mapped more than 500 individual lava flows on Mauna Loa Volcano. These flows originated from vents in the summit area, rift zones, and flanks of the volcano. Their locations help identify the approximate pathways for future flows that erupt in similar locations. Nine maps depicting 18 inundation zones, each including potential future vent locations and the corresponding downslope areas that could be buried if future lava flows reached the ocean. When an eruption begins, the zones can be used to quickly identify communities, infrastructure, and roads that could be affected by lava flows from the erupting vent(s). However, it is likely that only part of a zone will be buried in a single eruption.
Surface topography determines steepest descent paths
A lava flow moves down the flank of a volcano under the influence of gravity, similar to how water flows downhill through gullies, channels, and valleys. Such low areas can be described as steepest descent paths for flowing water. In the absence of obvious water drainages on active Hawaiian shield volcanoes, scientists calculate steepest descent paths for flowing lava using computer software and digital topographic maps called digital elevation models (DEMs); the paths are shown as lines on a map. DEMs are not perfect representations of the earth's surface, however, which means that steepest descent paths are only approximate. Steepest descent paths in the Puna District, Island of Hawai‘i, published in 2007 were used to forecast paths for a lava flow that spread eastward from the Pu‘u ‘Ō‘ō vent on the East Rift Zone of Kīlauea Volcano in 2014-2015.
Lava flow travel times based on actual flow rates
Travel time estimates for a lava flow are based on the actual advance rate of the flow and, if known, the overall advance rate of earlier lava flows that passed through the same location. However, this method of forecasting travel time is highly uncertain, because factors that control flows are constantly changing—eruption rate, ground slope the flow is moving over, and complex behavior of ‘a‘ā and pāhoehoe flows.
Measured advance rates on the Island of Hawai‘i are as fast as 9.3 km (5.8 mi) per hour for an ‘a‘ā flow erupted from Mauna Loa in 1950, which is slightly slower than typical human jogging speed. Pāhoehoe lava flows typically move more slowly, less than a few hundred meters (or yards) per hour or day. The distance a flow travels ultimately depends on the eruption rate and duration, slope, and evolution of the flow field, including whether and how lava tubes, lava channels, or subsequent breakouts develop and progress.
Lava flows on the Island of Hawai‘i are renowned for their frequent occurrence, relatively easy access, land-building ocean entries, and for Hawaiian names that describe their surface textures—rubbly ‘a‘ā or smooth and sometimes ropey pāhoehoe.
Hawaiian lava flows generally advance slowly and can be easily avoided by people. However, lava flows can destroy everything in their paths—rainforests, buildings, roads, utility and communication systems, and whole communities. During the 1983–2018 eruption of Kīlauea Volcano at the Pu‘u ‘Ō‘ō vent, several people died because of the hazards associated with lava entering the ocean.
The likelihood that future lava flows will interfere with human activity and infrastructure increases as communities and other development encroach on Hawaii's active volcanoes. USGS scientists characterize long-term lava flow hazards based on where and how often past lava inundation has occurred. When a new lava flow erupts, scientists use different methods to estimate where and how quickly it will travel downslope.
Lava-flow hazard zones vary across the Island of Hawai‘i
The first USGS map showing volcanic hazard zones on the Island of Hawai‘i was prepared in 1974 and revised in 1987 and 1992. The latest map divides the island into 9 zones, with lava flows most likely to occur in Zone 1 and least likely in Zone 9.
Hazard zones from lava flows are based chiefly on the location and frequency of both historic and prehistoric eruptions. 'Historic eruptions' include those for which there are written records, beginning in the early 1800s, and those that are known from the oral traditions of the Hawaiians. Our knowledge of prehistoric eruptions is based on geologic mapping and dating of the old flows of each volcano. The hazard zones also take into account the larger topographic features of the volcanoes that will affect the distribution of lava flows. Finally, any hazard assessment is based on the assumption that future eruptions will be similar to those in the past. The hazard boundaries are approximate, and the change in the degree of hazard is generally gradual rather than abrupt.
The probability of future lava flows is not the same for all areas of the Island of Hawai‘i. The long-term lava-flow threat is greatest on Kīlauea and Mauna Loa, the two most active volcanoes, followed by Hualālai.
The 1992 lava flow hazard zone map is also available as a downloadable KMZ file, and you can read more about viewing it in Google Earth or as a GIS layer in the June 10, 2005, Volcano Watch article.
Please visit the Frequently Asked Questions and Answers about Lava-Flow Hazards for more information.
Lava flow forecasts based on past flows and topography
Hawaiian Volcano Observatory (HVO) scientists use two methods to forecast the path of a lava flow: broad inundation zones based on the mapped pathways of previous lava flows, and steepest descent paths based on a digital elevation model of a volcano's topography or surface. Estimates of lava flow travel times are based on known advance rates of active flows and earlier flows from within the same area.
Past lava flows define inundation zones: Mauna Loa
HVO scientists have mapped more than 500 individual lava flows on Mauna Loa Volcano. These flows originated from vents in the summit area, rift zones, and flanks of the volcano. Their locations help identify the approximate pathways for future flows that erupt in similar locations. Nine maps depicting 18 inundation zones, each including potential future vent locations and the corresponding downslope areas that could be buried if future lava flows reached the ocean. When an eruption begins, the zones can be used to quickly identify communities, infrastructure, and roads that could be affected by lava flows from the erupting vent(s). However, it is likely that only part of a zone will be buried in a single eruption.
Surface topography determines steepest descent paths
A lava flow moves down the flank of a volcano under the influence of gravity, similar to how water flows downhill through gullies, channels, and valleys. Such low areas can be described as steepest descent paths for flowing water. In the absence of obvious water drainages on active Hawaiian shield volcanoes, scientists calculate steepest descent paths for flowing lava using computer software and digital topographic maps called digital elevation models (DEMs); the paths are shown as lines on a map. DEMs are not perfect representations of the earth's surface, however, which means that steepest descent paths are only approximate. Steepest descent paths in the Puna District, Island of Hawai‘i, published in 2007 were used to forecast paths for a lava flow that spread eastward from the Pu‘u ‘Ō‘ō vent on the East Rift Zone of Kīlauea Volcano in 2014-2015.
Lava flow travel times based on actual flow rates
Travel time estimates for a lava flow are based on the actual advance rate of the flow and, if known, the overall advance rate of earlier lava flows that passed through the same location. However, this method of forecasting travel time is highly uncertain, because factors that control flows are constantly changing—eruption rate, ground slope the flow is moving over, and complex behavior of ‘a‘ā and pāhoehoe flows.
Measured advance rates on the Island of Hawai‘i are as fast as 9.3 km (5.8 mi) per hour for an ‘a‘ā flow erupted from Mauna Loa in 1950, which is slightly slower than typical human jogging speed. Pāhoehoe lava flows typically move more slowly, less than a few hundred meters (or yards) per hour or day. The distance a flow travels ultimately depends on the eruption rate and duration, slope, and evolution of the flow field, including whether and how lava tubes, lava channels, or subsequent breakouts develop and progress.