Isotope variations in a Sierra Nevada snowpack and their relation to meltwater

Isotopic variations in melting snow are poorly understood. We made weekly measurements at the Central Sierra Snow Laboratory, California, of snow temperature, density, water equivalent and liquid water volume to examine how physical changes within the snowpackgovern meltwater δ¹⁸O. Snowpack samples were extracted at 0.1 m intervals from ground level to the top of the snowpack profile between December 1991 and April 1992. Approximately 800 mm of precipitation fell during the study period with δ¹⁸O values between −21.35 and −4.25‰. Corresponding snowpack δ¹⁸O ranged from −22.25 to −6.25‰. The coefficient of variation of δ¹⁸O in snowpack levels decreased from −0.37 to −0.07 from winter to spring, indicating isotopic snowpack homogenization. Meltwater δ¹⁸O ranged from −15.30 to −8.05‰, with variations of up to 2.95‰ observed within a single snowmeltepisode, highlighting the need for frequent sampling. Early snowmelt originated in the lower snowpack with higher δ¹⁸O through ground heat flux and rainfall. After the snowpack became isothermal, infiltrating snowmelt displaced the higher δ¹⁸O liquid in the lower snowpack through a piston flow process. Fractionation analysis using a two-component mixing model on the isothermal snowpack indicated that δ¹⁸O in the initial and final half of major snowmelt was 1.30‰ lower and 1.45‰ higher, respectively, than the value from simple mixing. Mean snowpack δ¹⁸O on individual profiling days showed a steady increase from −15.15 to −12.05‰ due to removal of lower δ¹⁸O snowmelt and addition of higher δ¹⁸O rainfall. Results suggest that direct sampling of snowmelt and snow cores should be undertaken to quantify tracer input compositions adequately. The snowmelt sequence also suggests that regimes of early lower δ¹⁸O and later higher δ¹⁸O melt may be modeled and used in catchment tracing studies.