MODFLOW-2000, the U.S. Geological Survey Modular Ground-Water Model; documentation of packages for simulating evapotranspiration with a segmented function (ETS1) and drains with return flow (DRT1)

Two new packages for the U.S. Geological Survey modular finite-difference ground-water-flow model MODFLOW-2000 are documented. The new packages provide flexibility in simulating evapotranspiration and drain features not provided by the MODFLOW-2000 Evapotranspiration (EVT) and Drain (DRN) Packages. The report describes conceptualization of the packages, input instructions, listings and explanations of the source code, and example simulations.

The new Evapotranspiration Segments (ETS1) Package allows simulation of evapotranspiration with a user-defined relation between evapotranspiration rate and hydraulic head. This capability provides a degree of flexibility not supported by the EVT Package, which has been available in MODFLOW since its initial release. In the ETS1 Package, the relation of evapotranspiration rate to hydraulic head is conceptualized as a segmented line between an evaporation surface, defined as the elevation where the evapotranspiration rate reaches a maximum, and an elevation located at an extinction depth below the evaporation surface, where the evapotranspiration rate reaches zero. The user supplies input to define as many intermediate segment endpoints as desired to define the relation of evapotranspiration rate to head between these two elevations. The EVT Package, in contrast, simulates evapotranspiration with a single linear function.

The new Drain Return (DRT1) Package can be used to simulate the return flow of water discharged from a drain feature back into the ground-water system. The DRN Package, which has been available in MODFLOW since its initial release, does not have the capability to simulate return of flow. If the return-flow option of the DRT1 Package is selected, for each cell designated as a drain-return cell, the user has the option of specifying a proportion of the water simulated as leaving the ground-water system through the drain feature that is to be simulated as returning simultaneously to one other cell in the model.