Skip to main content
U.S. flag

An official website of the United States government

Volcano Watch — Recent earthquake highlights one of Hawai‘i's most hazardous faults

February 18, 2016

On Friday, February 12, at 9:23 a.m., HST, a magnitude-4.1 earthquake occurred beneath Kīlauea Volcano's south flank.

But this is probably not news to many "Volcano Watch" readers. Shaking from the earthquake was felt throughout the Island of Hawai‘i, with reports to the USGS "Did you feel it?" website (http://earthquake.usgs.gov/earthquakes/dyfi) from as far away as Captain Cook and Hōlualoa on the west side of the island. 

The Hilina Pali on Kīlauea Volcano's south flank is visible evidence of the steep Hilina Fault System. Beneath this system lies the flat-lying décollement fault that has no visible surface expression, but has produced several large earthquakes in the past 200 years. Photo courtesy of Ingrid Johanson.

Felt earthquakes are not unusual. Kīlauea's south flank is one of the most seismically active areas in the United States, and Hawai‘i Island residents are accustomed to feeling the occasional shake. However, Friday's earthquake occurred on a fault that has also produced large and damaging events in past years, so it serves as a reminder that we should be prepared for stronger shaking in the future.

The faults responsible for the majority of Kīlauea south flank earthquakes are members of the Hilina Fault System. This system includes steep faults that form the cliffs lining Hawai‘i's southeast coast, of which the Hilina and Hōlei Pali are spectacular examples. Underneath these faults is another, and more uncommon, type of fault called a dEACUTEcollement. Analysis of Friday's earthquake by USGS Hawaiian Volcano Observatory (HVO) seismologists indicates that it likely occurred on this unique structure.

"Décollement" or "detachment fault" refers to a nearly flat-lying fault that is often completely buried underground. At Kīlauea, a décollement exists at the interface between the original seafloor and the overlying volcano. Sliding along this fault is driven partly by magma intruding into Kīlauea's East Rift Zone, which puts pressure on the south flank of the volcano and pushes it seaward. Fault slip is also driven by gravity. Repeated eruptions oversteepen the slopes of Kīlauea, contributing to their instability and encouraging them to slide away from the island. 

Data from HVO's continuous GPS monitoring network shows that most of the time Kīlauea south flank motion occurs at a steady rate of 6 cm (2.5 in) per year. This indicates stable sliding on the fault, referred to as "creep," which accommodates motion without the shaking that accompanies earthquakes. In this way, creep is a "safe" form of fault motion. 

However, Kīlauea's south flank décollement doesn't only creep. It can also suddenly lurch forward in a matter of seconds, producing felt earthquakes. 

While the steep faults responsible for Hilina, Hōlei, and other pali produce the majority of earthquakes on Kīlauea's south flank, the décollement is responsible for the strongest quakes. 

In 1989, slip on the décollement produced a magnitude-6.1 earthquake, which injured five people, destroyed five houses, and was felt throughout the Island of Hawai‘i. The strongest shaking was centered in the island's lower Puna District, an area that has since seen rapid population growth.

The 1975 magnitude-7.7 Kalapana earthquake was even more destructive. At the time, there were few structures near the epicenter, but severe shaking occurred throughout the Puna District and in Hilo, which experienced heavy damage, including bending of walls at Hilo Hospital. The earthquake also caused the coastline to suddenly drop by up to 3.5 m (11 ft), generating a tsunami that resulted in the two fatalities associated with this event.

We live on an earthquake-prone island and each small event (for example, Friday’s M-4.1 earthquake) is like a "ping" on our cell phones, reminding us: "you’ve got earthquakes!" We should take these reminders as opportunities to get ourselves, our families, and our homes prepared for Hawaii's next large event. 

Before an earthquake, be sure that objects and furniture that could present falling hazards are well-secured to a shelf or wall. During an earthquake, drop, cover, and hold on until the shaking stops. Afterward, check for injuries, be careful of broken glass and debris, and carefully inspect your surroundings for hazardous conditions, including fires and damaged structures. 

For more information on earthquake awareness and preparedness, please visit these websites: USGS Earthquake Hazards Program (http://earthquake.usgs.gov/learn/preparedness.php) and Great Hawai‘i ShakeOut (http://shakeout.org/hawaii/).

Volcano Activity Update


Kīlauea continues to erupt at its summit and East Rift Zone. During the past week, the summit lava lake level varied between about 29 and 40 m (95–131 ft) below the vent rim within Halema‘uma‘u Crater. On the East Rift Zone, scattered lava flow activity remains within about 6 km (4 mi) of Pu‘u ‘Ō‘ō and is not currently threatening nearby communities. 

Mauna Loa is not erupting. Seismicity remains elevated above long-term background levels, with earthquakescontinuing to occur mostly beneath the volcano's upper Southwest Rift Zone and southern caldera region at depths of less than 5 km (3 mi). Global Positioning System (GPS) measurements show continued deformationrelated to inflation of a magma reservoir beneath the summit and upper Southwest Rift Zone of Mauna Loa, with inflation recently occurring mainly in the southwestern part of the magma storage complex.

Two earthquakes were reported felt on the Island of Hawai‘i n the past week. On Friday, February 12, at 9:23 a.m., HST, a magnitude-4.1 earthquake occurred 7.7 km (4.8 mi) west of Kalapana at a depth of 8.3 km (5.1 mi). On Sunday, February 14, at 3:42 a.m., HST, a magnitude-2.7 earthquake occurred 12.4 km (7.7 mi) west of Kailua-Kona at a depth of 39.5 km (24.5 mi).

Get Our News

These items are in the RSS feed format (Really Simple Syndication) based on categories such as topics, locations, and more. You can install and RSS reader browser extension, software, or use a third-party service to receive immediate news updates depending on the feed that you have added. If you click the feed links below, they may look strange because they are simply XML code. An RSS reader can easily read this code and push out a notification to you when something new is posted to our site.