Design and functionality analysis of the high-stress permeameter (HSP), a device developed for measuring mechanical and hydraulic properties of gas hydrate-bearing pressure core

To characterize sediment compressibility and permeability in the presence of gas hydrate, a naturally occurring combination of water and methane that requires elevated pressure and reduced temperature to remain stable, a high-stress permeameter (HSP) device was developed. The HSP was designed to accept gas hydrate-bearing pressure core specimens in their plastic liner at pressures of 10–11 MPa. The HSP was further designed to carry out compressibility and permeability tests over a range of effective stresses while maintaining the requirements for gas hydrate stability. To verify the validity of HSP measurements of sediment consolidation properties, we tested remolded kaolin samples in the HSP and three standard fixed-ring oedometers. Furthermore, we compared the direct fluid-flow permeability measurements from the HSP with estimates based on Terzaghi’s log-time method for calculating permeability from 1-dimensional oedometer-style consolidation tests. We found agreement between all devices for consolidation (e.g., coefficients of compressibility and recompression) and permeability results. These findings indicate the suitability of the HSP for consolidation tests, as well as the log-time method for estimating permeability from oedometer consolidation tests.