Skip to main content
U.S. flag

An official website of the United States government

Process-based coastal erosion modeling for Drew Point (North Slope, Alaska)

July 3, 2012

A predictive, coastal erosion/shoreline change model has been developed for a small coastal segment near Drew Point, Beaufort Sea, Alaska. This coastal setting has experienced a dramatic increase in erosion since the early 2000’s. The bluffs at this site are 3-4 m tall and consist of ice-wedge bounded blocks of fine-grained sediments cemented by ice-rich permafrost and capped with a thin organic layer. The bluffs are typically fronted by a narrow (∼ 5  m wide) beach or none at all. During a storm surge, the sea contacts the base of the bluff and a niche is formed through thermal and mechanical erosion. The niche grows both vertically and laterally and eventually undermines the bluff, leading to block failure or collapse. The fallen block is then eroded both thermally and mechanically by waves and currents, which must occur before a new niche forming episode may begin. The erosion model explicitly accounts for and integrates a number of these processes including: (1) storm surge generation resulting from wind and atmospheric forcing, (2) erosional niche growth resulting from wave-induced turbulent heat transfer and sediment transport (using the Kobayashi niche erosion model), and (3) thermal and mechanical erosion of the fallen block. The model was calibrated with historic shoreline change data for one time period (1979-2002), and validated with a later time period (2002-2007).

Publication Year 2012
Title Process-based coastal erosion modeling for Drew Point (North Slope, Alaska)
DOI 10.1061/(ASCE)WW.1943-5460.0000106
Authors Thomas M. Ravens, Benjamin M. Jones, Jinlin Zhang, Christopher D. Arp, Joel A. Schmutz
Publication Type Article
Publication Subtype Journal Article
Series Title Journal of Waterway, Port, Coastal and Ocean Engineering
Index ID 70046934
Record Source USGS Publications Warehouse
USGS Organization Alaska Science Center