Skip to main content
U.S. flag

An official website of the United States government

Isotopic, elemental, and grainsize analyses of USGS19, USGS20, NBS 19, and IAEA-603 reference materials

November 12, 2026

USGS19 and USGS20 are new reference materials intended for δ¹³C and δ¹⁸O laboratory use. We produced these reference materials by subjecting a slab of Carrara marble to crushing, milling, sieving, magnetic separation, density separations in bromoform, and numerous rinses in acetone and deionized water. Subsequent sieving of the resultant calcite isolate to 180-300 microns produced USGS19, while the finer 75-180 micron fraction was designated USGS20. Here, we present analyses performed by the Bascom Laser Diffraction Laboratory, Reston Electron Microbeam Laboratory, and Reston Stable Isotope Laboratory, all located in Reston, Virginia, USA. Grain size measurements were performed for USGS19 and USGS20, as well as reference materials NBS 19 and IAEA-603, using a Beckman Coulter LS 13 320 XR laser diffractometer (Indianapolis, Indiana, USA). This approach measures the percent of total volume represented by a given grain size range, and is accurate for all reference materials in question. USGS19 had a mean grain size of 293 ± 78 microns (1s), nearly identical to NBS 19's mean grain size of 287 ± 73 microns (1s). IAEA-603, which was sieved to a wider range, featured a mean grain size of 360 ± 129 microns (1s). USGS20, having experienced the finest sieving, had a mean grain size of 203 ± 44 microns (1s). Every reference material featured distributions skewed toward larger-than-expected grain sizes, which we attribute to elongate grains. Elemental analyses were performed for USGS19, NBS 19, and IAEA-603 using a JEOL-8900 Superprobe (Tokyo, Japan). All reference materials featured 55-56% CaO, 43-44% CO2, and 0.4-0.7% MgO. These compositions are consistent with nearly entirely pure calcite separates. Carbon and oxygen isotopic analyses were performed for USGS19, USGS20, and NBS 19 using a Thermo Finnigan Delta V isotope-ratio mass spectrometer (Hanna-Kunath-Straße 11, 28199 Bremen, Germany) and a GasBench II-CF-IRMS (CTC Analytics AG, Zwingen, Switzerland).

Publication Year 2026
Title Isotopic, elemental, and grainsize analyses of USGS19, USGS20, NBS 19, and IAEA-603 reference materials
DOI 10.5066/P14PFCSP
Authors William E Odom, Ryan McAleer, Haiping Qi, Lauren T Reid, Tyler B Coplen
Product Type Data Release
Record Source USGS Asset Identifier Service (AIS)
USGS Organization Florence Bascom Geoscience Center
Rights This work is marked with CC0 1.0 Universal
Was this page helpful?