How are different map projections used?

The method used to portray a part of the spherical Earth on a flat surface, whether a paper map or a computer screen, is called a map projection. No flat map can rival a globe in truly representing the surface of the entire Earth, so every flat map misrepresents the surface of the Earth in some way. A flat map can show one or more--but never all--of the following: 

  • True directions
  • True distances
  • True areas
  • True shapes

Different projections have different uses. Some projections are used for navigation, while other projections show better representations of the true relative sizes of continents.

For example, the basic Mercator projection yields the only map on which a straight line drawn anywhere within its bounds shows a true direction, but distances and areas on Mercator projection maps are grossly distorted near the map's polar regions. On an equidistant map projection, distances are true only along particular lines, such as those radiating from a single point selected as the center of the projection. Shapes are more or less distorted on every equal-area map. 

The scale of a map on any projection is often crucial to the map's usefulness for a given purpose. For example, the extreme distortion that is present at high latitudes on a small-scale Mercator map of the World disappears almost completely on a properly oriented Transverse Mercator map of a small area in the same high latitudes. A large-scale (1:24,000) 7.5-minute USGS topographic map based on the Transverse Mercator projection is nearly correct in every respect.

 The USGS Map Projections poster summarizes and compares eighteen common map projections and their uses.


Related Content

Filter Total Items: 6

How do I find, download, or order topographic maps?

The U.S. Geological Survey (USGS) has been the primary civilian mapping agency of the United States since 1879. The best known USGS maps are the 1:24,000-scale topographic maps, also known as 7.5-minute quadrangles. Download all dates and scales of USGS topographic maps free of charge from the following applications or order paper copies of all...

What do the different north arrows on a USGS topographic map mean?

A diagram at the bottom of most USGS topographic maps shows three north arrows--true north, grid north, and magnetic north--and the angles between them. Some maps, especially very old maps, do not have this diagram. Vertical line with a star at the tip, second angled line with GN at the tip, third angled line with MN at the tip. Example of north arrows from US...

What are the projection, horizontal and vertical datum, format, and distributed tile extent of 3D Elevation Program (3DEP) contours?

Contours are not projected, but are provided in geographic coordinates (latitude and longitude) in units of decimal degrees, and horizontally referenced to the North American Datum of 1983. Contour elevation values are vertically referenced to the North American Vertical Datum of 1988. Contours are staged in Esri File Geodatabase 10.1 or Shapefile...

What are the projection, horizontal and vertical datum, and resolution for 3D Elevation Program (3DEP) standard DEMs?

All 3DEP seamless DEMs are provided in geographic coordinates (longitude and latitude) in units of decimal degrees, horizontally referenced on the North American Datum of 1983 (NAD83). All elevation values are in units of meters, typically referenced to the North American Vertical Datum of 1988 (NAVD88), although the National Geodetic Vertical...

What is the State Plane Coordinate System? Can GPS provide coordinates in these values?

The State Plane Coordinate System (SPCS), which is only used in the United States, is a plane coordinate system (north-south and east-west lines are perpendicular) in which each individual state has between one to six zones, depending on the state's size and shape. This coordinate system’s high level of accuracy is achieved through the use of...

How are UTM coordinates measured on USGS topographic maps? Are UTM ticks shown on all topographic maps?

The UTM ( Universal Transverse Mercator ) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 19, which includes Maine. If UTM ticks are shown on a USGS...
Filter Total Items: 3
Date published: October 30, 2018

USGS Topo Base Map Refreshed and Other Updates

The “USGS Topo Base Map” service named “USGS Topo” has been refreshed with new data and design changes. In addition, several of the “Data Availability”, or “Data Index” services have new cloud hosted URLs.

Date published: July 31, 2017

Mapping Public Lands in the United States

The Protected Areas Database of the United States (PAD-US) is the official inventory of public parks and other protected areas in all U.S. states and territories.

Date published: July 5, 2017

Finding Yourself Outdoors

Updated USGS digital topographic maps feature more trails and other recreation points of interest

Filter Total Items: 2
Mercator the Man
July 18, 2017

Gerardus Mercator

Map of the lower 48 states with vertical lines superimposed to indicate ten UTM zones numbered left to right from 10 to 19.

Mapping- UTM Grid conterminous 48 United States

The Universal Transverse Mercator grid that covers the conterminous 48 United States comprises 10 zones—from Zone 10 on the west coast through Zone 19 in New England. In each zone,coordinates are measured north and east in meters.