Hydrologic information for land-use planning, Fairbanks vicinity, Alaska

The flood plain on the Chena and Tanana Rivers near Fairbanks, Alaska, has abundant water in rivers and in an unconfined alluvial aquifer. The principal source of ground water is the Tanana River, from which ground water flows northwesterly to the Chena River. Transmissivity of the aquifer commonly exceed 100 ,000 sq ft. The shallow water table (less than 15 ft below land surface), high hydraulic conductivity of the sediments and cold soil give the flood plain a high susceptibility to pollution by onsite sewerage systems. The Environmental Protection Agency recommended maximum concentrations for drinking water may be exceeded in surface water for manganese and bacteria and in ground water for iron, manganese, and bacteria. Residents of the uplands obtain water principally from a widely-distributed fractured schist aquifer. The aquifer is recharged by local infiltration of precipitation and is drained by springs on the lower slopes and by ground-water flow to alluvial aquifers of the valleys. The annual base flow from basins in the uplands ranged from 3,000 to 100,000 gallons per acre; the smallest base flows occur in basins nearest the city of Fairbanks. The thick silt cover and great depth to the water table give much of the uplands a low susceptibility to pollution by onsite sewage disposal. Ground water is locally high in nitrate, arsenic, iron , and manganese. (Woodard-USGS)