Modification of rod surface elevation tables for monitoring extreme elevation shifts in wetlands

Rod surface elevation tables (RSETs) are effective tools for measuring changes in ground surface height, but these are not designed to withstand large changes in height (e.g., ±50 cm). After extreme changes in elevation due to erosion or accretion, RSET sites may be deemed unusable; however, this equipment usually can function indefinitely with in-situ modifications. Here, we provide a methodological description for in-situ modifications to RSETs that can be invaluable for long-term monitoring. In a sampling site with a high rate of surface elevation loss, longer pins can be inserted into the RSET arm to continue measurements. In a site with a high rate of accretion, RSETs buried in sediment can be raised by adding rod extensions, which is a particularly effective approach if the surface elevation can be measured before and after the attachment. Any modification to an RSET requires a reconceptualization of the original equations used to estimate change in the surface elevation, and these revised equations are described in this paper. We tested the measurement variability of the RSET before and after modification in West Dongting Lake, China. Results indicated that modification did not compromise data quality or precision and stability of RSET measurements. The reconceptualized equations incorporate offset adjustments that maintain datum consistency, enabling continuous data collection across pre- and postmodification phases with millimeter-scale precision. These RSET modifications can be used to extend the life of long-term RSET monitoring sites if the surface elevation has changed beyond the measurement capacity of the original RSET.