Approximately 8,000 chemical analyses of water produced from formations of several geologic ages in south eastern New Mexico and western Texas are tabulated by both geographic location and geologic formation.
Empirical and mathematical relationships between (1) the dissolved solids and the measured and computed resistivity of water, the chloride-ion concentration and the density, and (2) the concentration of chloride-ion and the density and the resistivity of water, were established. Resistivities of water computed following a method developed by Moore, Szasz, and Whitney (1966) using the concentration of the six most common constituents dissolved in natural water correlate favorably with the measured resistivities of natural water.
The water analyses were obtained chiefly from oil companies and oil-service companies operating in the western part of the Permian basin. The data were associated with the proper well by searching location, operator, and reference number cross indexes prepared from the Permian Basin Well Data System files. The cross indexes were determined to be essential to efficient data processing operations. After preliminary screening for nonrepresentative data, all data were indexed to the Permian Basin Well Data System magnetic tape file scout records by the unique reference number. The data were then coded, punched into tabulating cards, and stored on magnetic tape for computer operations.
Data verification steps not normally required when using data received from a laboratory following standardized analytical techniques on samples obtained under standardized and controlled procedures were performed in order to upgrade reliability of the information. Data errors detected included poorly located or identified samples; mistakes including reproducing, or key punching; laboratory errors; inconsistent reporting; and nonrepresentative or contaminated samples.
