Publications

At a marsh on the hanging wall of the Seattle fault, fossil brackish water diatom and plant seed assemblages show that the marsh lay near sea level between ∼7500 and 1000 cal yr B.P. This marsh is uniquely situated for recording environmental changes associated with past earthquakes on the Seattle fault. Since 7500 cal yr B.P., changes in fossil diatoms and seeds record several rapid...

The purpose of this report is to provide information on how and why we deploy seismic instruments in and around building structures. The recorded response data from buildings and other instrumented structures can be and are being primarily used to facilitate necessary studies to improve building codes and therefore reduce losses of life and property during damaging earthquakes. Other...

This program, SUDS2SEGY, converts and combines ASCII files created using SUDS2ASC Version 2.60, to a single SEGY file. SUDS2ASC has been used previously to create an ASCII file of three-component seismic data for an individual recording station. However, many seismic processing packages have difficulty reading in ASCII data. In addition, it may be cumbersome to process a separate file...

The purpose of this paper is to review developments in the quantitative modeling of fault-scarp geomorphology, principally those since 1980. These developments utilize diffusionequation mathematics, in several different forms, as the basic model of fault-scarp evolution. Because solutions to the general diffusion equation evolve with time, as we expect faultscarp morphology to evolve...

Analysis of the results of repeated levelings through the epicentral region of the Mw 6.7, 1994 Northridge earthquake has disclosed the occurrence of differential uplift in this area that preceded the earthquake. Although the distribution of the relevant vertical-control data is somewhat sparse, in both space and time, those data that we have recovered indicate that this uplift exceeded...

We performed rapid depressurization experiments on methane hydrate under isothermal conditions above 272 K to determine the amount and rate of methane evolution. Sample temperatures rapidly drop below 273 K and stabilize near 272.5 K during dissociation. This thermal anomaly and the persistence of methane hydrate are consistent with the reported recovery of partially dissociated methane...

No abstract available.

We performed rapid depressurization experiments on methane hydrate under isothermal conditions above 272 K to determine the amount and rate of methane evolution. Sample temperatures rapidly drop below 273 K and stabilize near 272.5 K during dissociation. This thermal anomaly and the persistence of methane hydrate are consistent with the reported recovery of partially dissociated methane...

The Oligocene Creede Formation was deposited in the moat of the Creede caldera, which formed as a result of eruption of ythe Snowshoe Mountains Tuff. The Creede Formation in the two moat drill holes contains ash layers that are considered fallout tuffs derived from Fisher Dacite volcanoes that were erupting during accumulation of the Creede Formation. The duration of sedimentation of the...

A simple and powerful method for simulating ground motions is based on the assumption that the amplitude of ground motion at a site can be specified in a deterministic way, with a random phase spectrum modified such that the motion is distributed over a duration related to the earthquake magnitude and to distance from the source. This method of simulating ground motions often goes by the...

Hydrogen impurities in alumina have been introduced by hydrothermal annealing (see part I). In this paper, we report on reductions in the flow strength of α-Al2O3 single crystals and polycrystals associated with hydrogen incorporation. Prior to deformation, α-Al2O3 single crystal and ceramic specimens were annealed in the presence of supercritical water at 850° or 900°C, under 1500 MPa...

In 1978, the U.S. Geological Survey (USGS) began acquiring seismic refraction data throughout the U.S. and Saudi Arabia. Numerous professional papers have been published in the literature and the technical details and goals for most of these surveys have been described in USGS Open-file reports (Table 1). This report describes the archiving of the data.