Velocity Mapping with ADCP in the Illinois River and Des Plaines River
Water velocities were measured along the Illinois and Des Plaines Rivers using a Teledyne Rio Grande 1200 kHz acoustic Doppler current profiler (ADCP). ADCP data were collected in reciprocal pairs along crosssections and along approximately streamwise-oriented lines between crosssections at the following locations:
(1) the Dresden Island Pool of the Des Plaines River on May 14, 2013 and July 31 August 1, 2013
(2) the Marseilles Pool of the Illinois River on May 14-15, 2013 and May 28, 2013
(3) the confluence of the Fox River and the Illinois River near Ottawa, IL on November 4, 2015
(4) immediately downstream of Starved Rock Lock and Dam on the Illinois River near Utica, IL on May 19, 2015 and May 22, 2015.
The WinRiverII classic ASCII output file and a comma-separated ASCII file containing the latitude, longitude, beam depths, and 4-beam average depth recorded for each ensemble are provided for each ADCP transect. The classic ASCII output files may be imported into the Velocity Mapping Toolbox (https://hydroacoustics.usgs.gov/movingboat/VMT/VMT.shtml) for processing and visualization. The velocity data were collected as part of the GLRI velocity mapping project for the Illinois River. The velocity data were used to estimate shear stress, which was used as an input into the Fluvial Egg Drift Simulator (FluEgg) model for simulation of Asian carp egg transport and dispersal.
Citation Information
Publication Year | 2016 |
---|---|
Title | Velocity Mapping with ADCP in the Illinois River and Des Plaines River |
DOI | 10.5066/F74T6GDK |
Authors | James J Duncker |
Product Type | Data Release |
Record Source | USGS Asset Identifier Service (AIS) |
USGS Organization | Central Midwest Water Science Center |
Rights | This work is marked with CC0 1.0 Universal |