Publications

Characterizing rotational motions from earthquakes at local distances has the potential to improve earthquake engineering and seismic gradiometry by better characterizing the complete seismic wavefield. Applied Technology Associates (ATA) has developed a proto‐seismic magnetohydrodynamic (SMHD) three‐component rotational rate sensor. We deploy two ATA rotational rate sensors at a...

Although widespread agreement that the Cascadia subduction zone produces great earthquakes of magnitude 8 to 9 was reached decades ago, debate continues about the rupture lengths, magnitudes, and frequency of megathrust earthquakes recorded by wetland stratigraphy fringing Cascadia’s estuaries. Correlation of such coastal earthquake evidence along the subduction zone has largely relied...

The U.S. Geological Survey’s PAGER automated alert system provides rapid (10-20 min) loss estimates in terms of ranges of fatalities and economic impact for all significant earthquakes around the globe. In contrast, FEMA’s Hazus software, which is currently operated manually by FEMA personnel internally within several hours of any large domestic earthquake, provides more detailed loss...

California has the highest earthquake risk of any state in the United States. The Federal Emergency Management Agency (FEMA) reported in 2017 that 73% of the nation’s annual losses to earthquakes were expected to be concentrated in California and the Pacific Northwest. California alone constitutes 61% ($3.7 billion out of an estimated $6.1 billion annual losses nationwide). Despite this

The California Department of Transportation (Caltrans) is organizing and leading a three-year Transportation Pooled Fund (TPF) project, Connecting the Dots: Implementing ShakeCast Across Multiple State Departments of Transportation for Rapid Post-Earthquake Response. Ten state Departments of Transportation (DOT)—CA, ID, MO, MS, OK, OR, SC, TX, UT, AND WA—have partnered and combined...

Quantitative interpretation of the tidal response of water levels measured in wells has long been made either with a model for perfectly confined aquifers or with a model for purely unconfined aquifers. However, many aquifers may be neither totally confined nor purely unconfined at the frequencies of tidal loading but behave somewhere between the two end‐members. Here we present a more...

Oklahoma experienced three earthquakes of Mw5.0 or greater in 2016: the 13-Feb. Fairview earthquake (Mw5.1), the 03-Sep. Pawnee earthquake (Mw5.8), and the 07-Nov. Cushing earthquake (Mw5.0). These events are the first earthquakes in the state exceeding Mw5.0 since the 2011 Mw5.7 Prague earthquake and likely result from wide-scale deep fluid-injection. We use interferometric synthetic...

The San Andreas Fault System is a 1300-km-long transform boundary that accommodates motion between the North American and Pacific Plates. New technologies and data reveal rich details about the present configuration of faults, distribution of strain and associated seismic hazard on this complex network of faults. This contribution provides a brief summary of the geologic history of the...

To standardize parameters used in seismometer testing and calibration and to make these algorithms accessible to the seismological community, we have developed a new seismometer testing software package called Albuquerque Seismological Laboratory (ASL) Sensor Test Suite. This software is written in Java and makes use of Seismological Exchange for Earthquake Data (SEED) format. Our goal...

This paper extends and detides a Karachi tide-gauge record as an observational basis for assessing Indian Ocean tsunami risk. The extended marigram encompasses the time of the great 1945 Makran earthquake of early November 28, local time, and of the ensuing tsunami, which continued into November 29. The marigram was published previously as a 9-h excerpt that begins 1 h after the...

On March 22, 2018, the Seattle Department of Construction and Inspections (SDCI) and the U.S. Geological Survey (USGS) convened a workshop of engineers and seismologists to provide guidance on incorporating sedimentary basin response into the design of tall buildings in Seattle. This workshop provided recommendations that build on those from a March 2013 workshop (Chang and others, 2014)

Tectonic tremor can be used to constrain seismic‐wave attenuation for use in ground‐motion prediction equations (GMPEs) in regions where moderately sized earthquakes occur infrequently. Here we quantify seismic‐wave attenuation by inverting tremor ground motion amplitudes in different frequency bands of interest, to determine frequency dependence of and spatial variations in seismic‐wave