How are UTM coordinates measured on USGS topographic maps?
The UTM (Universal Transverse Mercator) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 19, which includes Maine. If UTM ticks are shown on a USGS topographic map, the zone is indicated in the credit legend in the lower left corner of the map collar.
Within each zone, coordinates are measured as northings and eastings in meters. The northing values are measured from zero at the equator in a northerly direction. Each zone has a central meridian that is assigned an easting value of 500,000 meters. In Zone 16, for example, the central meridian is at 87 degrees longitude west. One meter east of that central meridian is 500,001 meters easting.
Almost all USGS topographic maps produced after 1977 show UTM tick marks on the sides of the map (or a full-line grid) every 1,000 meters. Some maps, including all those produced after 2009 (US Topo maps) include full UTM grid lines. To make UTM measurements, subdivide the 1,000-meter grid squares into tenths or hundredths. This narrows down the coordinate to a 100 meter or 10 meter square. Measurements can be made using a gridded mylar overlay, a paper scale, or a coordinate reader.
Note that the large numbers adjacent to the tick marks around the perimeter of the map represent tens of thousands and thousands of meters. The millions and hundreds of thousands of meters are shown with small numbers and are sometimes dropped when giving UTM coordinate positions. The military implementation of UTM (Military Grid Reference System or MGRS) drops the small digits and indicates the 100,000 meter square by a two letter identifier. Most UTM users and GPS (Global Positioning System) units use the full value of the UTM coordinates.
Learn more:
Related
How do I find, download, or order topographic maps? How do I find, download, or order topographic maps?
The U.S. Geological Survey (USGS) has been the primary civilian mapping agency of the United States since 1879. Some of the most well-known USGS maps are the 1:24,000-scale topographic maps, also called 7.5-minute quadrangles. In 2009, the USGS transitioned from our hand scribed historical topographic maps to US Topos, which are computer-generated on a regular schedule using national databases...
Where can I find indexes of USGS topographic maps? Where can I find indexes of USGS topographic maps?
View map indexes on these interactive maps (you must zoom in to see the index lines and map names) : Map Locator on the USGS Store - Click the icon on the left that looks like two pieces of paper and select “1:24,000” for our standard map series. TopoView - Click on any of the round map scale indicators on the right side of the map. The National Map Viewer - Click on the Layer List icon at the top...
How are different map projections used? How are different map projections used?
The method used to portray a part of the spherical Earth on a flat surface, whether a paper map or a computer screen, is called a map projection. No flat map can rival a globe in truly representing the surface of the entire Earth, so every flat map misrepresents the surface of the Earth in some way. A flat map can show one or more--but never all--of the following: True directions True distances...
Related
How do I find, download, or order topographic maps? How do I find, download, or order topographic maps?
The U.S. Geological Survey (USGS) has been the primary civilian mapping agency of the United States since 1879. Some of the most well-known USGS maps are the 1:24,000-scale topographic maps, also called 7.5-minute quadrangles. In 2009, the USGS transitioned from our hand scribed historical topographic maps to US Topos, which are computer-generated on a regular schedule using national databases...
Where can I find indexes of USGS topographic maps? Where can I find indexes of USGS topographic maps?
View map indexes on these interactive maps (you must zoom in to see the index lines and map names) : Map Locator on the USGS Store - Click the icon on the left that looks like two pieces of paper and select “1:24,000” for our standard map series. TopoView - Click on any of the round map scale indicators on the right side of the map. The National Map Viewer - Click on the Layer List icon at the top...
How are different map projections used? How are different map projections used?
The method used to portray a part of the spherical Earth on a flat surface, whether a paper map or a computer screen, is called a map projection. No flat map can rival a globe in truly representing the surface of the entire Earth, so every flat map misrepresents the surface of the Earth in some way. A flat map can show one or more--but never all--of the following: True directions True distances...