Moment magnitude, Richter scale - what are the different magnitude scales, and why are there so many?
Earthquake size, as measured by the Richter Scale is a well known, but not well understood, concept. The idea of a logarithmic earthquake magnitude scale was first developed by Charles Richter in the 1930's for measuring the size of earthquakes occurring in southern California using relatively high-frequency data from nearby seismograph stations. This magnitude scale was referred to as ML, with the L standing for local. This is what was to eventually become known as the Richter magnitude.
As more seismograph stations were installed around the world, it became apparent that the method developed by Richter was strictly valid only for certain frequency and distance ranges. In order to take advantage of the growing number of globally distributed seismograph stations, new magnitude scales that are an extension of Richter's original idea were developed. These include body wave magnitude (Mb) and surface wave magnitude (Ms). Each is valid for a particular frequency range and type of seismic signal. In its range of validity, each is equivalent to the Richter magnitude.
Because of the limitations of all three magnitude scales (ML, Mb, and Ms), a new, more uniformly applicable extension of the magnitude scale, known as moment magnitude, or Mw, was developed. In particular, for very large earthquakes, moment magnitude gives the most reliable estimate of earthquake size.
Moment is a physical quantity proportional to the slip on the fault multiplied by the area of the fault surface that slips; it is related to the total energy released in the earthquake. The moment can be estimated from seismograms (and also from geodetic measurements). The moment is then converted into a number similar to other earthquake magnitudes by a standard formula. The result is called the moment magnitude. The moment magnitude provides an estimate of earthquake size that is valid over the complete range of magnitudes, a characteristic that was lacking in other magnitude scales.
Learn more:
Related
Seismometers, seismographs, seismograms - what's the difference? How do they work? Seismometers, seismographs, seismograms - what's the difference? How do they work?
A seismometer is the internal part of the seismograph, which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph". Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a seismographic network. The earliest "seismoscope" was...
How can I make my own seismometer? How can I make my own seismometer?
It is relatively easy to acquire the necessary materials and build your own seismometer. The links here are to various sources with information on how to build a seismometer. They range from very simple and inexpensive to sophisticated and pricey. Model Seismograph - Classroom Demonstration Build your own Seismograph Station Build Your Own Seismograph Amateur Seismology Homebuilt Seismograph FAQ
What was the first instrument that actually recorded an earthquake? What was the first instrument that actually recorded an earthquake?
The earliest seismoscope was invented by the Chinese philosopher Chang Heng in A.D. 132. This was a large urn on the outside of which were eight dragon heads facing the eight principal directions of the compass. Below each dragon head was a toad with its mouth opened toward the dragon. When an earthquake occurred, one or more of the eight dragon-mouths would release a ball into the open mouth of...
What is a Geoid? Why do we use it and where does its shape come from? What is a Geoid? Why do we use it and where does its shape come from?
A geoid is the irregular-shaped “ball” that scientists use to more accurately calculate depths of earthquakes, or any other deep object beneath the earth’s surface. Currently, we use the “WGS84” version (World Geodetic System of 1984). If Earth were a perfect sphere, calculations of depth and distances would be easy because we know the equations for those calculations on a sphere. However, the...
Related
Seismometers, seismographs, seismograms - what's the difference? How do they work? Seismometers, seismographs, seismograms - what's the difference? How do they work?
A seismometer is the internal part of the seismograph, which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph". Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a seismographic network. The earliest "seismoscope" was...
How can I make my own seismometer? How can I make my own seismometer?
It is relatively easy to acquire the necessary materials and build your own seismometer. The links here are to various sources with information on how to build a seismometer. They range from very simple and inexpensive to sophisticated and pricey. Model Seismograph - Classroom Demonstration Build your own Seismograph Station Build Your Own Seismograph Amateur Seismology Homebuilt Seismograph FAQ
What was the first instrument that actually recorded an earthquake? What was the first instrument that actually recorded an earthquake?
The earliest seismoscope was invented by the Chinese philosopher Chang Heng in A.D. 132. This was a large urn on the outside of which were eight dragon heads facing the eight principal directions of the compass. Below each dragon head was a toad with its mouth opened toward the dragon. When an earthquake occurred, one or more of the eight dragon-mouths would release a ball into the open mouth of...
What is a Geoid? Why do we use it and where does its shape come from? What is a Geoid? Why do we use it and where does its shape come from?
A geoid is the irregular-shaped “ball” that scientists use to more accurately calculate depths of earthquakes, or any other deep object beneath the earth’s surface. Currently, we use the “WGS84” version (World Geodetic System of 1984). If Earth were a perfect sphere, calculations of depth and distances would be easy because we know the equations for those calculations on a sphere. However, the...