Skip to main content
U.S. flag

An official website of the United States government

IN-KY Winter Newsletter 2016

Welcome to the “Winter 2016” version of the IN-KY Newsletter. I use this format two to four times a year to highlight USGS activities and water-related science going on at the Indiana-Kentucky Water Science Center. I also take advantage of this opportunity to highlight some of our amazing scientists that work for the USGS.

The Indiana-Kentucky Water Science Center appreciates your continued interest, dedication, and support. With the support of our federal, state and local partners, we will continue to deliver on our promise of providing timely and accurate water information to meet the needs of the Nation, especially those in Indiana and Kentucky.

Annual Cooperators Meeting


The Indiana–Kentucky Water Science Center (IN-KY) held two highly successful Cooperator’s Meetings on October 5th in Indianapolis and October 6th in Louisville. In total, over 100 cooperators attended presentations focusing on IN-KY’s science capabilities and future program outlook. In addition to cooperators, Congressional staffers from 4 offices attended to learn more about the science USGS does to serve the people of our Nation. 

Augmented Reality Sandbox
Jeremiah Lant presenting the augmented reality sandbox. 
Ecomapper - New Technology
Justin Boldt explaning some INKY new technology - the EcoMapper.

 

 

 

 

 

 

 

 

 

 

 

 

A few of the meeting highlights included: the IN-KY Hydrologic Networks, a new U.S. Forest Service Partnership, a better Understanding of Climate Change and Soil Moisture, Monitoring Edge of Fields, Expanding our U.S. Army Corps of Engineers Partnership, A Columbus Storm Warning System, Scour Modeling of the I-64 Bridge, Nutrient and Algal Relations in Lakes, Growing our Super Gage Program, the Sparrow Toolbox, and highlighting USGS Specialized and Innovative Technologies such as Multibeam Bathymetry and Terrestrial LiDAR, the AUV EcoMapper, the Augmented Reality Sand Box, the LISST Technology and UAS Drone technology.

 

U.S. Freshwater Withdrawals, 1950-present


How and where Americans use water has changed with our population growth and many technological, environmental, and regulatory drivers. Every 5 years since 1950, the USGS has compiled and estimated water-use information in cooperation with state, federal, and local agencies to document how the Nation's water resources are used. This information is essential to accurately understand how future water demands will be met while maintaining adequate water quality and quantities for human and ecosystem needs.

A cool new tool to help visualize Indiana and Kentucky water-use information has been developed. The USGS Water Availability and Use Science Program have developed water use data visualization (https://owi.usgs.gov/vizlab/water-use/) that highlights our data from 1950 to 2010. The visualization will help people see how much and where we use water across the Nation.

Map of  United States with regard to freshwater withdrawal rates
In the figure above, data on freshwater withdrawals for thermoelectric power, public supply, irrigation, and industrial withdrawals are shown. State size (area) is scaled proportionally to State freshwater use.

 

Maupin, M.A., Kenny, J.F., Hutson, S.S., Lovelace, J.K., Barber, N.L., and Linsey, K.S., 2014, estimated use of water in the United States in 2010: U.S. Geological Survey Circular 1405, 56 p.,  http://dx.doi.org/10.3133/cir1405.

Estimated  use  of  water  in  the  United  States,  various  years: https://water.usgs.gov/watuse/50years.html.

 

 

 

 

 

 

 

Unmanned Aircraft System
Unmanned Aircraft System

Unmanned Aerial Systems (UAS)


The US Geological Survey, Indiana-Kentucky Water Science Center (IN-KY WSC) is committed to pursuing new and innovative technologies while becoming a center of excellence for advanced methods of data collection. The new IN-KY WSC Unmanned Aircraft System (UAS) is at the forefront of these technological advances. The use of UAS technology within the Department of Interior is quickly becoming a more viable method of data collection and the local IN-KY WSC UAS Program works closely with the USGS National UAS Project Office, as well as the Office of Aviation Services (OAS) within the Department of Interior.

The 3DR Solo quadcopter™ is a versatile system allowing for easy setup and quick launch. This platform currently comes equipped with a GoPro Hero 4 ™ for video-data collection. The USGS also has mounts available which allow the use of traditional point-and-shoot cameras for orthoimagery as well as multi-spectral cameras for more advanced mapping options. A FLIR camera option is coming soon allowing data collection to assess thermal variation within systems. On average, the 3DR Solo ™  can cover between 300-500 acres per day, while flying at approximately 300-400 feet above ground level.

Pulse helicopter drone
Pulse Aerospace vapor 55 Helicopter
3DR Solo quadcopter equipped with a camera
3DR Solo quadcopter equipped with a camera.

 

 

 

 

 

 

 

 

 

 

The Pulse Aerospace Vapor 55 Helicopter ™ is currently the most advanced platform available within the USGS. This platform is a new option and currently the only OAS-approved platform able to carry a relatively heavy LiDAR sensor. The Pulse Aerospace Vapor ™ has an approximate flight time of just less than one hour. The Pulse Aerospace Vapor ™ is also unique in that it allows for the use of multiple sensors to be mounted and used at the same time.

2-D model output of velocities (Wabash River IN)
2-D model output of depth-averaged velocities through the I-64 bridge section, Wabash River.
Standard aerial imagery
                   Standard aerial imagery.

 

 

 

 

 

 

 

 

 

 

Some common applications include: 

  • Wildlife-Population Counts
  • Harmful Algal Bloom Assessment
  • Wetland Monitoring
  • Ground-water/Surface-water Interactions
  • Search and Rescue
  • Natural-Disaster Damage Assessment
  • Vegetative Mapping
  • Crop Analysis
  • Invasive-Species Monitoring

 

Licking River (Falmouth, KY) Flood Inundation Mapping Project – Media Day

Licking River Flood Inundation Map Media Day
Licking River Flood Inundation Map Media Day

Digital flood inundation maps for a 17-mile reach of Licking River and 4-mile reach of South Fork Licking River near Falmouth, Kentucky, were created by the U.S. Geological Survey, Indiana-Kentucky Water Science Center (USGS) in cooperation with Pendleton County and the U.S. Army Corps of Engineers– Louisville District. The inundation maps depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Licking River at Catawba, KY(03253500) and the USGS streamgage on the South Fork Licking River at Hayes, KY (03253000). The calibrated model was used to calculate 60 water- surface profiles for a sequence of flood stages, at 2- foot intervals, referenced to the streamgage datum and ranging from an elevation near bank-full to the elevation associated with a major flood that occurred in the region in 1997. The availability of these flood- inundation maps for the Falmouth community along with online information regarding current stages from the USGS streamgages and forecasted stages from the NWS provides emergency-management personnel and local residents with information that is critical for flood-response activities such as evacuations, road closures, and post-flood recovery efforts.

USGS flood inundation mapper -  http://wimcloud.usgs.gov/apps/FIM/FloodInundationMapper.html

 

Wabash River Modeling

The USGS, in cooperation with the Indiana Department of Transportation (INDOT) and the Illinois Department of Transportation (IDOT), developed two different computational models of the Wabash River at the I-64 bridge to investigate future scenarios.

2-D model output of velocities (Wabash River IN)
2-D model output of depth-averaged velocities through the I-64 bridge section.
Results from a river meander model (Wabash River IN)
Results from a river meander model showing predicted future river centerlines.

 

RVR Meander—This is a simplified 2-D river meander model that can predict future centerline migration. It was calibrated to historic river centerlines, and it models bank erosion with a physically-based method based on soil properties.

 

 

 

SRH-2D—This is a two-dimensional hyraulic model that solves for a variety of hydraulic parameters (velocity, water depth, shear stress) in the channel and floodplain. The underlying surface was based on a digital elevation model (DEM) created from lidar and in-channel bathymetry. The results were also used to create flood-inundation maps for the area.

This site was also selected for an ongoing bridge scour countermeasure project that the USGS is working on in partnership with the Federal Highway Administration (FHWA). High-resolution bathymetry and terrestrial lidar were collected in May 2016.

 

Employee Spotlight

Kathy Fowler is a Hydrologist with the IN-KY Water Science Center, works out of the Indianapolis office and is part of the Specialized Water Modeling and Applied Technology Unit.

Kathy Fowler boat measurement

Kathy’s first major work experience was in the oil fields of Texas and Louisiana as a mud-logging geologist. Kathy has been with the USGS since 1980. She began her career as a Hydrologic Technician then joined the Upward Mobility Program to become a Hydrologist. Kathy has experience in both groundwater and surface-water hydrology; she has created GIS databases for military bases within Indiana and has applied GIS techniques to classify hydrogeologic data for use in the groundwater model, MODFLOW. Kathy led projects to compile hydrogeologic and water-quality data for the St. Joseph Aquifer System and sediment transport along Juday Creek. For Indiana’s Source Water Assessment, Kathy surveyed and described intakes at most of Indiana’s surface-water suppliers. She has participated in mercury studies in litterfall, precipitation, and streams.

Kathy Fowler in the field


Her most recent work has involved flood-inundation mapping, low-flow characteristics estimation, and regional regression analysis for low-flow estimation at ungaged sites.
She is Project Chief for a Wetland Extent study with NRCS. She is an active member in Indiana Water Resources Association and is a Licensed Professional Geologist.

 

 

 

 

 

Tim Lathrop  joined the IN-KY WSC in October of 2001, as a Hydrologic Technician collecting water-quality data for the National Water-Quality Assessment (NAWQA) program’s White River Study Unit. He quickly became the Field Team Lead for NAWQA water-quality sampling in the Indianapolis office, which he continued to do through 2013. During this time, he expanded his knowledge and abilities in order to run a regular field trip to collect surface water flow measurements at stream- gage sites.

Tim Lathrop at gaging station

Early in his USGS career, Tim converted to a Hydrologist and was the key water-quality Field Team Lead for the Agricultural Contaminant Transport, Nutrient Enrichment Effects, and Drinking Water Assessment studies between 2003 and 2007. He has been a pioneer in the Indianapolis office by being the first to install and maintain continuous water-quality equipment at several NAWQA stream sites and being the first to develop suspended sediment surrogate models in the IN-KY WSC. This pioneering work led to the development of multiple water-quality monitoring sites in Indiana, now called  “Super Gages.” He has additionally authored multiple fact sheets and reports.

Tim is the Project Chief for the Indianapolis office “Super -Gage” program and oversees the installation, operation, management, and data collection for a network of ten water quality or Super Gages that collect data on parameters such as temperature, specific conductance, dissolved oxygen, pH, turbidity, nitrate, and orthophosphate. Tim uses these data in the development of suspended-sediment surrogate models that relate continuously-measured turbidity to suspended-sediment concentrations, which  then  can be used in load estimates. He is also in the process of developing nutrient surrogate models that relate dissolved nutrients to total nutrient concentrations. Tim loves to talk about the Indianapolis Super Gage program and has given more than a dozen talks a year about the program and the data.

In his spare time, Tim spends quality time with his adorable family, his wife Cara and two daughters, Ayla (9) and Alexis (7).


Luis Garcia started his career with the U.S. Geological Survey after receiving his graduate degree in Natural Resources from the University of Illinois. Before this he taught high-school biology and chemistry for 5 years in St. Louis and Chicago. 

While working towards his Bachelor of Science in Biology and then his Master’s Degree in Natural Resources, he had great internship opportunities that included working on ecosystem restoration at Pacific Northwest National Laboratory, updating soil profile maps and making wetland delineations in central Alaska and using Biological Index Values and water quality as metrics for efficacy of restoration practices in an urban park in St. Louis.

Luis Garcia making a surface water measurement from a boat
Luis Garcia servicing a gage located on a bridge

 

 

 

 

 

 

 

 

 

 

 

Since joining the Indiana-Kentucky Water Science Center, Murray Office, he has been given many opportunities to learn a great deal about water- quantity and quality issues from a great group of people. “Everyone I have worked with so far has brought their unique set of skills and was excited to be doing what they were doing. I have especially enjoyed working on water-quality issues for surface water”. Garcia believes that ensuring our resources are clean and available is paramount for generations to come and is excited to learn more about some of the issues USGS will be focusing on in the future and looks forward to contributing to these efforts as his career moves forward.

 

Get Our News

These items are in the RSS feed format (Really Simple Syndication) based on categories such as topics, locations, and more. You can install and RSS reader browser extension, software, or use a third-party service to receive immediate news updates depending on the feed that you have added. If you click the feed links below, they may look strange because they are simply XML code. An RSS reader can easily read this code and push out a notification to you when something new is posted to our site.

Was this page helpful?