Skip to main content
U.S. flag

An official website of the United States government

Landsat 9 Stowed and Sealed for Delivery to Orbit

August 20, 2021

As reported in a recent NASA News Release, the Landsat 9 observatory has been encapsulated in the fairing of the Atlas V 401 rocket that will deliver it into orbit this September.

The Landsat 9 Rocket Fairing
The Landsat 9 rocket fairing with the Landsat 9 observatory stowed for launch inside on Monday, August 16, 2021, at Vandenberg Space Force Base. Photo credit: USSF 30th Space Wing/Chris Okula

Return to all Landsat Headlines

The satellite was first attached, or mated, to a ring known as a Payload Adapter. The satellite and adapter were then lifted and stacked on top of the L9 ESPA Flight System (EFS) secondary payload that will launch underneath the Landsat 9 satellite to deploy four small SmallSats after the launch vehicle first releases the Landsat 9 satellite in orbit.

Engineers from Northrop Grumman (the observatory fabricator) and United Launch Alliance (the rocket fabricator) conducted the stacking of the payloads last week at Vandenberg Space Force Base near Lompoc, CA where Landsat 9 is scheduled to launch from on Thursday, September 16, 2021.

The mated satellite stack was then sealed in the 4-meter aluminum rocket nosecone that will protect Landsat 9 as it makes its way into low-Earth orbit. (The atmosphere and even specks of dust can be detrimental to a satellite when encountered at rocket speed, so a fairing is an essential element of a launch vehicle.)

Once above the atmosphere, the Landsat 9 observatory will emerge from the fairing when the rocket’s onboard computer initiates fairing jettison, approximately four and a half minutes after launch. This entails cutting of the frangible bolts that connect the fairing halves and then forcibly pushing apart the halves with strong springs. The loose fairing halves, having done their job, will then fall back toward Earth and be burned up in the atmosphere.

The rocket’s single-engine Centaur upper-stage will then propel the unencumbered satellite to its final orbital altitude.

About one hour and twenty minutes after launch, the Centaur will initiate separation of the Landsat 9 observatory from its payload adapter, the final step in the Landsat 9 launch sequence. (Watch Landsat 8 separate from its launch vehicle here.) 

The Centaur will then make two engine burns to lower its orbit approximately 100 km in altitude, initiate release of the SmallSats from L9 EFS, and then do a fourth engine burn to direct the Centaur into the atmosphere over the Pacific Ocean.

The Landsat 9 Observatory being Encapsulated
The Landsat 9 observatory in one half of its fairing (left); the L9 observatory being encapsulated in its two fairing halves (center); and the final push to fully encapsulate the satellite (right). Fun fact: In the first two images, you can see the L9 EFS and its rectangular SmallSat dispensers just below the L9 observatory and payload adapter ring. Photo credit, left and center: NASA/Randy Beaudoin; photo credit, right: USSF 30th Space Wing/Chris Okula

Landsat 9 is a joint mission of NASA and the U.S. Geological Survey. Landsat 9 is the most advanced satellite in the Landsat series; it will extend the data record of Earth’s land surface that began with the first Landsat satellite in 1972. Landsat’s high-quality scientific data makes multi-decadal time series studies possible, and its data are regularly used for land management efforts around the world.

Landsat 9 launch preparations are managed by NASA’s Launch Services Program (LSP) under the direction of LSP Landsat 9 Mission Manager, Chuong Nguyen.

Get Our News

These items are in the RSS feed format (Really Simple Syndication) based on categories such as topics, locations, and more. You can install and RSS reader browser extension, software, or use a third-party service to receive immediate news updates depending on the feed that you have added. If you click the feed links below, they may look strange because they are simply XML code. An RSS reader can easily read this code and push out a notification to you when something new is posted to our site.