Volcano Watch is a weekly article and activity update written by U.S. Geological Survey Hawaiian Volcano Observatory scientists and affiliates.

Sources/Usage: Public Domain. View Media Details

GPS has also become an integral part of our daily lives, guiding us while driving and helping us find the nearest gas station or beach parking with remarkable precision: typically, 10–20 feet (3–6 meters), a miniscule distance on a global scale. However, scientists using GPS for volcano monitoring need to be able to measure changes that are less than a half of an inch (about a centimeter) to detect signs of magma moving underground—much more precise than a typical handheld GPS device or phone can offer.  

So how do we get these very precise GPS measurements? Although the graphs of processed GPS data on HVO’s public website look like simple strings of “polka dots,” there is much more to the story. It is a complex process requiring high-precision equipment, advanced software, and powerful computing capabilities.  

First, scientists and technicians install a specialized GPS antenna that is permanently fixed to the ground so that it measures only the motion of that specific spot. This GPS antenna is then connected to a high-precision, low noise GPS “receiver,” which carefully tracks the signals (electro-magnetic waves) that it receives from GPS satellites in space.    

Specialized software uses the signals recorded by the receiver to determine a precise GPS position. It does this by calculating the distances between the GPS antenna and the orbiting satellites. Multiple simultaneous measurements are needed to calculate a site’s precise position in three-dimensions. For each dot on a daily GPS graph, a full 24 hours of data is used. 

There is even more complexity to generate the most precise antenna locations. For example, scientists need to correct for some of the many factors that add uncertainty or noise to the primary GPS signal which further complicates the accuracy of GPS. This is where advanced software comes in. 

Since the early 1990s, HVO scientists have been using GPS processing software from NASA's Jet Propulsion Laboratory to get high-quality, precise GPS positions. The software first calculates travel times for signals from each GPS satellite to the antenna. It then uses details about the satellite clocks, orbit positions, and special geometry (called triangulation) to calculate a precise position of the GPS antenna. The combination of several sophisticated refinement techniques helps scientists calculate very precise positions with errors  that are less than a half of an inch (centimeter scale).

This spring, HVO upgraded their GPS data processing software to the latest program suite. It is designed to be more precise, accurate, user-friendly, and flexible. HVO continues to be at the forefront of GPS data collection and processing to monitor the active volcanoes in Hawaii and American Samoa and to best understand their risks, while advancing scientific knowledge and hopefully reducing the negative impacts of volcanic eruptions. 

HVO has over 70 permanent and continuously operating GPS stations on the Island of Hawai'i that gather data every day. Plus, HVO scientists collect survey measurements at another 50 to 70 benchmarks for a couple days a year. That’s a lot of raw data needing GPS post-processing to achieve the high-precision necessary for monitoring volcanoes!  

At the end of October, HVO scientists just completed the annual Kīlauea GPS campaign survey, visiting approximately 20 sites across the volcano. HVO also conducts an annual GPS survey at Mauna Loa volcano and less frequent surveys at Hualālai and Haleakalā, every 5–10 years, as part of the volcano monitoring program.  

The next time you are checking out one of HVO's GPS graphs, now you'll know a bit more about how much equipment, software, and analysis goes into each little dot. 

Volcano Activity Updates

Kīlauea is not erupting. Its USGS Volcano Alert level is ADVISORY. 

The area just south of Kīlauea's summit continues to show signs of episodic unrest. Overall, inflation at the summit of Kīlauea remains high and has surpassed the level seen just before the most recent eruption on September 10th. Seismicity in the region south of Kīlauea caldera summit continues, though at decreased rates from the peak in activity on October 6. The most recent sulfur dioxide (SO₂) emission rate, of approximately 100 tonnes per day, was measured on October 19.

Mauna Loa is not erupting. Its USGS Volcano Alert Level is at NORMAL. 

Webcams show no signs of activity on Mauna Loa. Seismicity remains low. Summit ground deformation rates indicate slow inflation as magma replenishes the reservoir system following the recent eruption. SO₂ emission rates are at background levels. 

Two earthquakes were reported felt in the Hawaiian Islands during the past week: a M3.0 earthquake 9 km (5 mi) WSW of Kalaoa at 29 km (18 mi) depth on Nov. 1 at 2:15 p.m. HST and a M3.7 earthquake 13 km (8 mi) ESE of Pāhala at 28 km (17 mi) depth on Oct. 27 at 5:07 a.m. HST.

HVO continues to closely monitor Kīlauea and Mauna Loa.

Please visit HVO’s website for past Volcano Watch articles, Kīlauea and Mauna Loa updates, volcano photos, maps, recent earthquake information, and more. Email questions to askHVO@usgs.gov.