Skip to main content
U.S. flag

An official website of the United States government

Bayesian analysis of the impact of rainfall data product on simulated slope failure for North Carolina locations

June 1, 2019

In the past decades, many different approaches have been developed in the literature to quantify the load-carrying capacity and geotechnical stability (or the Factor of Safety, F_s) of variably saturated hillslopes. Much of this work has focused on a deterministic characterization of hillslope stability. Yet, simulated F_s values are subject to considerable uncertainty due to our inability to characterize accurately the soil mantle’s properties (hydraulic, geotechnical and geomorphologic) and spatiotemporal variability of the moisture content of the hillslope interior. This is particularly true at larger spatial scales. Thus, uncertainty-incorporating analyses of physically based models of rain-induced landslides are rare in the literature. Such landslide modeling is typically conducted at the hillslope scale using gauge-based rainfall forcing data with rather poor spatiotemporal coverage. For regional landslide modeling, the specific advantages and/or disadvantages of gauge-only, radar-merged and satellite-based rainfall products are not clearly established. Here, we compare and evaluate the performance of the Transient Rainfall Infiltration and Grid-based Regional Slope-stability analysis (TRIGRS) model for three different rainfall products using 112 observed landslides in the period between 2004 and 2011 from the North Carolina Geological Survey database. Our study includes the Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis Version 7 (TMPA V7), the North American Land Data Assimilation System Phase 2 (NLDAS-2) analysis, and the reference ‘truth’ Stage IV precipitation. TRIGRS model performance was rather inferior with the use of literature values of the geotechnical parameters and soil hydraulic properties from ROSETTA using soil textural and bulk density data from SSURGO (Soil Survey Geographic database). The performance of TRIGRS improved considerably after Bayesian estimation of the parameters with the DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm using Stage IV precipitation data. Hereto, we use a likelihood function that combines binary slope failure information from landslide event and ‘null’ periods using multivariate frequency distribution-based metrics such as the False Discovery and False Omission Rates. Our results demonstrate that the Stage IV-inferred TRIGRS parameter distributions generalize well to TMPA and NLDAS-2 precipitation data, particularly at sites with considerably larger TMPA and NLDAS-2 rainfall amounts during landslide events than null periods. TRIGRS model performance is then rather similar for all three rainfall products. At higher elevations, however, the TMPA and NLDAS-2 precipitation volumes are insufficient and their performance with the Stage IV-derived parameter distributions indicate their inability to accurately characterize hillslope stability.

Publication Year 2019
Title Bayesian analysis of the impact of rainfall data product on simulated slope failure for North Carolina locations
DOI 10.1007/s10596-018-9804-y
Authors Soni Yatheendradas, Dalia Kirschbaum, Grey Nearing, Jasper A. Vrugt, Rex L. Baum, Rick Wooten, Ning Lu, Jonathan W. Godt
Publication Type Article
Publication Subtype Journal Article
Series Title Computational Geosciences
Index ID 70204529
Record Source USGS Publications Warehouse
USGS Organization Geologic Hazards Science Center