USGS EROS Archive - Committee on Earth Observation Satellites (CEOS) Legacy - Calibration/Validation Test Sites Active
This collection of test sites provides critical information on the post launch characterization and calibration of space-based optical imaging sensors to assist the global science community in providing more accurate land/climate studies.(1972 to present).
Earth surfaces with suitable characteristics have long served as test sites to verify the post launch radiometric calibration performance of satellite sensors. The U.S. Geological Survey (USGS), as a supporting member of the Committee on Earth Observation Satellites (CEOS) and the Global Earth Observation System of Systems (GEOSS), has established an online catalog of prime candidate test sites for the post launch characterization and calibration of space-based optical imaging sensors. The online catalog can be accessed at Calibration/Validation Test Site Catalog.
The CEOS Infrared and Visible Optical Sensors (IVOS) subgroup members established a set of CEOS-endorsed globally distributed reference standard test sites. There are eight instrumented sites and five pseudo-invariant test sites.
The instrumented sites are primarily used for field campaigns to obtain radiometric information. These sites serve as a focus for international efforts, facilitating traceability and cross-comparison to evaluate biases of in-flight and future sensors in a harmonized manner.
The pseudo-invariant desert sites were chosen because of their high reflectance and are composed mainly of sand dunes and areas with little, if any, vegetation. The pseudo-invariant reference standard test sites are used to evaluate the long-term stability of a sensor and to facilitate the cross-comparison of multiple sensors. They can also be used for the validation of higher-order climate variable products.
The USGS Earth Resources Observation and Science (EROS) Center Remote Sensing Technologies (RST) Project supports advanced instrumentation for sensor calibration and product validation. These properties include high-precision global positioning system (GPS) reference data, complete meteorological microclimate data, soil temperature and moisture data, surface solar radiation data, and carbon flux measurements. Without calibrated instruments, data products cannot be validated for science use; therefore, the instrument data are crucial.
Sensors used:
- Landsat ETM+ (Enhanced Thematic Mapper Plus)
- SRTM (Shuttle Radar Topography Mission)
- Landsat MSS (Multispectral Scanner)
- Landsat TM (Thematic Mapper)
- EO-1 ALI (Advanced Land Imager)
- EO-1 Hyperion
Additional Information
Access Data
EarthExplorer can be used to search, preview, and download Calibration/Validation Test Sites. The collection are located under the Calibration Dataset.
Digital Object Identifier (DOI)
CEOS Calibration/Validation Test Sites Digital Object Identifier (DOI) number: 10.5066/P96SGWPI
This collection of test sites provides critical information on the post launch characterization and calibration of space-based optical imaging sensors to assist the global science community in providing more accurate land/climate studies.(1972 to present).
Earth surfaces with suitable characteristics have long served as test sites to verify the post launch radiometric calibration performance of satellite sensors. The U.S. Geological Survey (USGS), as a supporting member of the Committee on Earth Observation Satellites (CEOS) and the Global Earth Observation System of Systems (GEOSS), has established an online catalog of prime candidate test sites for the post launch characterization and calibration of space-based optical imaging sensors. The online catalog can be accessed at Calibration/Validation Test Site Catalog.
The CEOS Infrared and Visible Optical Sensors (IVOS) subgroup members established a set of CEOS-endorsed globally distributed reference standard test sites. There are eight instrumented sites and five pseudo-invariant test sites.
The instrumented sites are primarily used for field campaigns to obtain radiometric information. These sites serve as a focus for international efforts, facilitating traceability and cross-comparison to evaluate biases of in-flight and future sensors in a harmonized manner.
The pseudo-invariant desert sites were chosen because of their high reflectance and are composed mainly of sand dunes and areas with little, if any, vegetation. The pseudo-invariant reference standard test sites are used to evaluate the long-term stability of a sensor and to facilitate the cross-comparison of multiple sensors. They can also be used for the validation of higher-order climate variable products.
The USGS Earth Resources Observation and Science (EROS) Center Remote Sensing Technologies (RST) Project supports advanced instrumentation for sensor calibration and product validation. These properties include high-precision global positioning system (GPS) reference data, complete meteorological microclimate data, soil temperature and moisture data, surface solar radiation data, and carbon flux measurements. Without calibrated instruments, data products cannot be validated for science use; therefore, the instrument data are crucial.
Sensors used:
- Landsat ETM+ (Enhanced Thematic Mapper Plus)
- SRTM (Shuttle Radar Topography Mission)
- Landsat MSS (Multispectral Scanner)
- Landsat TM (Thematic Mapper)
- EO-1 ALI (Advanced Land Imager)
- EO-1 Hyperion
Additional Information
Access Data
EarthExplorer can be used to search, preview, and download Calibration/Validation Test Sites. The collection are located under the Calibration Dataset.
Digital Object Identifier (DOI)
CEOS Calibration/Validation Test Sites Digital Object Identifier (DOI) number: 10.5066/P96SGWPI