# How fast does the earthquake information get posted to the web site, get sent out via the Earthquake Notification Service (ENS), ATOM feeds, etc?

First of all, USGS earthquake information mechanisms are all triggered by the same system, so they all receive the information at the same time. The time it takes for the system to receive the information primarily depends on where the earthquake is and how large it is.

• An Earthquake in California will get processed and posted to the system in 2-1/2 minutes on average. This is because our seismic network is very extensive in California where there are many earthquakes and many people.

• An earthquake in the US outside of California, where the seismic network is not as dense, will typically get posted within 8 minutes.

• An earthquake outside the US, where the seismic network is sparse in some areas, takes on average 20 minutes to process and post. Our webpages with realtime information are cached for 60 seconds, so there may be an additional delay of up to 60 seconds for the webpage to be updated.

From the time each system receives the information to the time you receive the information is the same for all systems, usually within a few seconds (unless there are network problems), except ENS and the Feeds, which can vary.

Since ENS (the Earthquake Notification System) has many thousands of accounts, all customized to receive different notifications, the time between ENS receiving the information and you receiving your notification can vary quite a bit. A large earthquake that generates many notifications may take up to 45 minutes to reach the last account on the list. A small earthquake that generates fewer notifications will take only a matter of several minutes to reach all accounts. The time it takes for the notifications to be sent is dependent on the capacity of the machines that send the email.

Social media outlets, such as Twitter, may be able to broadcast the occurrence of an earthquake faster than the USGS can using our standard mechanisms, but they cannot provide any quantitative data such as location and magnitude.

For the various Feeds, we cache different feeds for different lengths of time, so it depends on the feed you access.  We try to balance data volume, how often the data in the feeds change, and server load so:

* GeoJSON 7-days and less feeds are cached for 1 minute.

* Other 7-day and less feeds are cached for 5 minutes.

* 30-day feeds and searches are cached for 15 minutes.

* Event pages (and geojson detail feeds) are cached for 1 minute for the first 7 days after an event, and for 15 minutes after that.

The Earthquake Map/List/Search interface uses GeoJSON feeds.

## Related Content

Filter Total Items: 12

### Why don’t you report earthquakes in the local time where the earthquake occurred?

Since we and other seismic network agencies record earthquakes around the globe in all the various time zones, using a single standard time reference is best for record-keeping and exchange of data. Also, we tried converting UTC to the local time zones for epicenters and reporting them that way for a while on our website, and it confused our web...

### Why do so many earthquakes occur at a depth of 10km?

10 km is a "fixed depth". Sometimes data are too poor to compute a reliable depth for an earthquake. In such a case, the depth is assigned to be 10 km. In many areas around the world, reliable depths tend to average 10 km or close to it. For example, if we made a histogram of the reliable depths in such an area, we'd expect to see a peak around 10...

### Where can I see current or past seismograms?

The Earthquake Hazards Program has helicorders (seismogram displays) available for several areas in the United States and the World.

### Why do USGS earthquake magnitudes differ from those published by other agencies?

Summary Magnitude estimates for a given earthquake can vary between reporting agencies due to differences in methodology, data availability, and inherent uncertainties in seismic data. Individual agencies use magnitude estimation procedures designed to meet the agency's specific needs and monitoring capabilities. Even for well recorded events,...

### When are tsunami information and links put on the event page?

1. If we get information (alerts) from any of NOAA's Tsunami Warning Centers or 2. For any earthquake, magnitude 5.0 or greater, that occurred in a. the Pacific Ocean, or b. Indonesia, or c. Papua New Guinea, or d. the Caribbean Sea, or e. Hawaii (criteria from David Applegate, 07/20/2005) For More Information, See NOAA's Tsunami Warning Centers:...

### Why/When does the USGS update the magnitude of an earthquake?

The USGS often updates an earthquake's magnitude in the hours and sometimes days following the event. Updates occur as more data become available for analysis and more time-intensive analysis is performed. Additional updates are possible as a part of the standard procedure of assembling a final earthquake catalog. There are physical and...

### Why do some earthquakes disappear from the map/list?

The USGS and networks contributing to the Advance National Seismic System (ANSS) take great effort to provide accurate and timely earthquake information. Occasionally our systems produce erroneous information that is released to the public via our web pages or Earthquake Notification System . These mistakes are generally promptly identified by...

### Why isn't the fault on which the earthquake occurred or the distance to the nearest fault provided?

Seismologists evaluate the hypocenter location and the focal mechanism of an earthquake to decide if the earthquake occurs on a named fault. Research shows that many earthquakes occur on small, un-named faults located near well-known faults. For example, most of the aftershocks of the 1989 M6.9 Loma Prieta earthquake occurred on small, subsidiary...

### Did I feel an earthquake? Can I report feeling an earthquake?

Report an earthquake experience or related observation through the Did You Feel It? citizen science webpage. The best way to do this is to click on the earthquake that you think you felt on one of the lists on the Earthquakes webpage, and then select the "Tell Us!" link. If you don't see the earthquake you think you felt, use the green "Report an...

### Why is the earthquake that was reported/recorded by network X, or that I felt, not on the map/list?

The maps and lists show events which have been located by the USGS and contributing agencies within the last 30 days. They should not be considered to be complete lists of all events in the US and adjacent areas and especially should not be considered to be complete lists of all events M4.5+ in the world. In most cases, we locate and report on...

### Where can I find current earthquake lists and maps for the world or for a specific area?

The Earthquake Hazards Program Latest Earthquakes Map displays earthquakes in near-realtime and up to the past 30 days of earthquakes. The interface includes three panels: a list of earthquakes, a map, and a settings/options panel. You can pan and zoom the map to view specific areas. Click on an event on the list or map for additional information...
Filter Total Items: 4
Date published: May 25, 2017

### Updated USGS Earthquake Monitoring Strategy Released

The USGS Earthquake Hazards Program recently released a new strategic plan for earthquake monitoring entitled the “Advanced National Seismic System – Current Status, Development Opportunities, Priorities, 2017-2027.”

Date published: January 23, 2012

### A 100-year-long History of Earthquakes and Seismic Monitoring in Hawaii

The Hawaiian Volcano Observatory’s 1912–2012 Centennial—100 Years of Tracking Eruptions and Earthquakes

HAWAI‘I ISLAND, Hawaii —The history of earthquakes and seismic monitoring in Hawai‘i during the past century will be the topic of a presentation at the University of Hawai‘i at Hilo on Thursday, January 26, at 7:00 p.m.

Date published: May 3, 2010

More than $7 million in cooperative agreements will be awarded for earthquake monitoring by the U.S Geological Survey in 2010. This funding will contribute to the development and operation of the USGS Advanced National Seismic System (ANSS). Date published: September 24, 2009 ### Recovery Act Funds Will Upgrade Earthquake Monitoring USGS will Grant Universities$5 Million to Beef Up Public Safety Grants totaling \$5 million under the American Recovery and Reinvestment Act are being awarded to 13 universities nationwide to upgrade critical earthquake monitoring networks and increase public safety.

Filter Total Items: 7
January 25, 2018

### PubTalk 1/2018 — ShakeAlert: Path to West Coast EQ Early Warning

Title: ShakeAlert: The Path to West Coast Earthquake Early Warning ... how a few seconds can save lives and property

• The ShakeAlert earthquake early warning system will begin limited operations this year.
• Alerts could save lives and properties but several challenges remain.
• With millions at risk, why isn't full public alerting happening yet?
...
December 31, 2017

### Earthquake Catalog Map Results Example

Example of results returned when searching the USGS Earthquake Catalog. The ANSS Comprehensive Earthquake Catalog (ComCat) contains earthquake source parameters (e.g. hypocenters, magnitudes, phase picks and amplitudes) and other products (e.g. moment tensor solutions, macroseismic information, tectonic summaries, maps) produced by contributing seismic

...
August 31, 2016

### Latest Earthquakes

February 18, 2009

### Installing Antenna and Solar Panel for Seismic Station

With funding from the American Recovery and Reinvestment Act of 2009, The USGS Hawaiian Volcano Observatory recently upgraded its seismic monitoring network.  Here, HVO staff, assisted by an HVO volunteer, installs the solar panel and antenna for one of the upgraded seismic stations on Kīlauea.

### Scenario Earthquake Map

Interactive map showing earthquake scenario data