Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock () or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Earthquake size, as measured by the Richter Scale is a well known, but not well understood, concept. The idea of a logarithmic earthquake magnitude scale was first developed by Charles Richter in the 1930's for measuring the size of earthquakes occurring in southern California using relatively high-frequency data from nearby seismograph stations. This magnitude scale was referred to as ML, with the L standing for local. This is what was to eventually become known as the Richter magnitude.
As more seismograph stations were installed around the world, it became apparent that the method developed by Richter was strictly valid only for certain frequency and distance ranges. In order to take advantage of the growing number of globally distributed seismograph stations, new magnitude scales that are an extension of Richter's original idea were developed. These include body wave magnitude (Mb) and surface wave magnitude (Ms). Each is valid for a particular frequency range and type of seismic signal. In its range of validity, each is equivalent to the Richter magnitude.
Because of the limitations of all three magnitude scales (ML, Mb, and Ms), a new, more uniformly applicable extension of the magnitude scale, known as moment magnitude, or Mw, was developed. In particular, for very large earthquakes, moment magnitude gives the most reliable estimate of earthquake size.
Moment is a physical quantity proportional to the slip on the fault multiplied by the area of the fault surface that slips; it is related to the total energy released in the earthquake. The moment can be estimated from seismograms (and also from geodetic measurements). The moment is then converted into a number similar to other earthquake magnitudes by a standard formula. The result is called the moment magnitude. The moment magnitude provides an estimate of earthquake size that is valid over the complete range of magnitudes, a characteristic that was lacking in other magnitude scales.
Learn more:
Earthquakes are recorded by a seismographic network. Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy travels out from the earthquake hypocenter in a wave...
Magnitude scales, like the moment magnitude, measure the size of the earthquake at its source. An earthquake has one magnitude. The magnitude does not depend on where the measurement is made. Often, several slightly different magnitudes are reported for an earthquake. This happens because the relation between the seismic measurements and the magnitude is complex and different procedures will often...
For earthquakes that occurred between about 1890 (when modern seismographs came into use) and 1935 when Charles Richter developed the magnitude scale, people went back to the old records and compared the seismograms from those days with similar records for later earthquakes. For earthquakes prior to about 1890, magnitudes have been estimated by looking at the physical effects (such as amount of...
When an earthquake occurs, one of the first questions is "where was it?" The location may tell us what fault it was on and where damage (if any) most likely occurred. Unfortunately, Earth is not transparent and we can't just see or photograph the earthquake disturbance like meteorologists can photograph clouds. When an earthquake occurs, it generates an expanding wavefront from the earthquake...
Magnitude calculations are based on a logarithmic scale, so a ten-fold drop in amplitude decreases the magnitude by 1. If an amplitude of 20 millimetres as measured on a seismic signal corresponds to a magnitude 2 earthquake, then: 10 times less (2 millimetres) corresponds to a magnitude of 1; 100 times less (0.2 millimetres) corresponds to magnitude 0; 1000 times less (0.02 millimetres)...
An earthquake cannot physically occur at a depth of 0 km or -1km (above the surface of the earth). In order for an earthquake to occur, two blocks of crust must slip past one another, and it is impossible for this to happen at or above the surface of the earth. So why do we report that the earthquake occurred at a depth of 0 km or event as a negative depth sometimes? First of all, the depth of an...
The “Did you feel it?” ZIP Map for the 1994 Northrdige earthquake. Found at this link: https://earthquake.usgs.gov/earthquakes/eventpage/ci3144585/dyfi/zip
The “Did you feel it?” ZIP Map for the 1994 Northrdige earthquake. Found at this link: https://earthquake.usgs.gov/earthquakes/eventpage/ci3144585/dyfi/zip
EARTHQUAKES: WHAT YOU FEEL
EARTHQUAKE INTENSITY
EARTHQUAKES: WHAT YOU FEEL
EARTHQUAKE INTENSITY
Title: Where Earthquakes Hide in the Desert: What we've learned from recent fault ruptures in the western U.S.
By Austin J. Elliott, USGS Research Geologist
Title: Where Earthquakes Hide in the Desert: What we've learned from recent fault ruptures in the western U.S.
By Austin J. Elliott, USGS Research Geologist
Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.
Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.
Although numerous intensity scales have been developed over the last several hundred years to evaluate the effects of earthquakes, the one currently used in the United States is the Modified Mercalli Intensity (MMI) Scale. It was developed in 1931 by the American seismologists Harry Wood and Frank Neumann.
Although numerous intensity scales have been developed over the last several hundred years to evaluate the effects of earthquakes, the one currently used in the United States is the Modified Mercalli Intensity (MMI) Scale. It was developed in 1931 by the American seismologists Harry Wood and Frank Neumann.
Earthquakes are recorded by a seismographic network. Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy travels out from the earthquake hypocenter in a wave...
Magnitude scales, like the moment magnitude, measure the size of the earthquake at its source. An earthquake has one magnitude. The magnitude does not depend on where the measurement is made. Often, several slightly different magnitudes are reported for an earthquake. This happens because the relation between the seismic measurements and the magnitude is complex and different procedures will often...
For earthquakes that occurred between about 1890 (when modern seismographs came into use) and 1935 when Charles Richter developed the magnitude scale, people went back to the old records and compared the seismograms from those days with similar records for later earthquakes. For earthquakes prior to about 1890, magnitudes have been estimated by looking at the physical effects (such as amount of...
When an earthquake occurs, one of the first questions is "where was it?" The location may tell us what fault it was on and where damage (if any) most likely occurred. Unfortunately, Earth is not transparent and we can't just see or photograph the earthquake disturbance like meteorologists can photograph clouds. When an earthquake occurs, it generates an expanding wavefront from the earthquake...
Magnitude calculations are based on a logarithmic scale, so a ten-fold drop in amplitude decreases the magnitude by 1. If an amplitude of 20 millimetres as measured on a seismic signal corresponds to a magnitude 2 earthquake, then: 10 times less (2 millimetres) corresponds to a magnitude of 1; 100 times less (0.2 millimetres) corresponds to magnitude 0; 1000 times less (0.02 millimetres)...
An earthquake cannot physically occur at a depth of 0 km or -1km (above the surface of the earth). In order for an earthquake to occur, two blocks of crust must slip past one another, and it is impossible for this to happen at or above the surface of the earth. So why do we report that the earthquake occurred at a depth of 0 km or event as a negative depth sometimes? First of all, the depth of an...
The “Did you feel it?” ZIP Map for the 1994 Northrdige earthquake. Found at this link: https://earthquake.usgs.gov/earthquakes/eventpage/ci3144585/dyfi/zip
The “Did you feel it?” ZIP Map for the 1994 Northrdige earthquake. Found at this link: https://earthquake.usgs.gov/earthquakes/eventpage/ci3144585/dyfi/zip
EARTHQUAKES: WHAT YOU FEEL
EARTHQUAKE INTENSITY
EARTHQUAKES: WHAT YOU FEEL
EARTHQUAKE INTENSITY
Title: Where Earthquakes Hide in the Desert: What we've learned from recent fault ruptures in the western U.S.
By Austin J. Elliott, USGS Research Geologist
Title: Where Earthquakes Hide in the Desert: What we've learned from recent fault ruptures in the western U.S.
By Austin J. Elliott, USGS Research Geologist
Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.
Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.
Although numerous intensity scales have been developed over the last several hundred years to evaluate the effects of earthquakes, the one currently used in the United States is the Modified Mercalli Intensity (MMI) Scale. It was developed in 1931 by the American seismologists Harry Wood and Frank Neumann.
Although numerous intensity scales have been developed over the last several hundred years to evaluate the effects of earthquakes, the one currently used in the United States is the Modified Mercalli Intensity (MMI) Scale. It was developed in 1931 by the American seismologists Harry Wood and Frank Neumann.