A wind turbine rising above Oʻahu trees forms part of a wind energy installation where USGS bat research is taking place.
How many homes can an average wind turbine power?
According to the U.S. Energy Information Administration, the average U.S. home uses 893 kilowatt-hours (kWh) of electricity per month. Per the U.S. Wind Turbine Database, the mean capacity of wind turbines that achieved commercial operations in 2020 is 2.75 megawatts (MW). At a 42% capacity factor (i.e., the average among recently built wind turbines in the United States, per the 2021 edition of the U.S. Department of Energy’s Land-Based Wind Market Report), that average turbine would generate over 843,000 kWh per month—enough for more than 940 average U.S. homes. To put it another way, the average wind turbine that came online in 2020 generates enough electricity in just 46 minutes to power an average U.S. home for one month.
Related Content
How many pounds of minerals are required by the average person in a year?
To maintain our standard of living, each person in the United States requires over 40,630 pounds of minerals each year: 10, 765 pounds of stone 7,254 pounds of sand and gravel 685 pounds of cement 148 pounds of clays 383 pounds of salt 275 pounds of iron ore 168 pounds of phosphate rock 35 pounds of soda ash 34 pounds of aluminum 12 pounds of copper 11 pounds of lead 6 pounds of zinc 5 pounds of...
Can wind turbines harm wildlife?
A key challenge facing the wind industry is the potential for turbines to adversely affect wild animals both directly, via collisions, as well as indirectly due to noise pollution, habitat loss, and reduced survival or reproduction. Among the most impacted wildlife are birds and bats, which by eating destructive insects provide billions of dollars of economic benefits to the country’s agricultural...
How much water is used by people in the United States?
Since 1950, the USGS has collected and analyzed water-use data for the United States and its Territories . That data is revised every 5 years. As of 2015, the United States uses 322 billion gallons of water per day (Bgal/day). The three largest water-use categories were irrigation (118 Bgal/day), thermoelectric power (133 Bgal/day), and public supply (39 Bgal/day), cumulatively accounting for 90...
How many wind turbines are installed in the U.S. each year?
The number of turbines installed in the U.S. each year varies based on a number of factors, but on average 3,000 turbines have been built in the U.S. each year since 2005. Learn more: Wind Energy U.S. Wind Turbine Database
What materials are used to make wind turbines?
According to a report from the National Renewable Energy Laboratory (Table 30), depending on make and model wind turbines are predominantly made of steel (66-79% of total turbine mass); fiberglass, resin or plastic (11-16%); iron or cast iron (5-17%); copper (1%); and aluminum (0-2%). Many turbine components are domestically sourced and manufactured in the United States. According to the Land...
Why is it important to know the locations of wind turbines?
No publicly-available, national database of wind turbines existed prior to the creation of the USGS Windfarm mapper, which was replaced with the U.S. Wind Turbine Database (USWTDB) in 2018. Knowing the location of individual turbines and their technical specifications creates new opportunities for research and improved siting and is important information for land and resource management. In...
Wind turbine towering over trees
A wind turbine rising above Oʻahu trees forms part of a wind energy installation where USGS bat research is taking place.
Wind turbines at the Altamont Pass Wind Farm
The Altamont Pass Wind Far is located in northern California.
The Altamont Pass Wind Far is located in northern California.
Wind turbine on farm land next to a dilapidated barn
Wind turbine next to a dilapidated barn
Wind turbine next to a dilapidated barn
Wind Turbine Blade
This photo shows one of the three 135-ft blades of a turbine before installation. Although the blades of wind turbines appear to move quite slowly to the human eye, blade tips often move at speeds faster than 100 mph.
This photo shows one of the three 135-ft blades of a turbine before installation. Although the blades of wind turbines appear to move quite slowly to the human eye, blade tips often move at speeds faster than 100 mph.
Related Content
How many pounds of minerals are required by the average person in a year?
To maintain our standard of living, each person in the United States requires over 40,630 pounds of minerals each year: 10, 765 pounds of stone 7,254 pounds of sand and gravel 685 pounds of cement 148 pounds of clays 383 pounds of salt 275 pounds of iron ore 168 pounds of phosphate rock 35 pounds of soda ash 34 pounds of aluminum 12 pounds of copper 11 pounds of lead 6 pounds of zinc 5 pounds of...
Can wind turbines harm wildlife?
A key challenge facing the wind industry is the potential for turbines to adversely affect wild animals both directly, via collisions, as well as indirectly due to noise pollution, habitat loss, and reduced survival or reproduction. Among the most impacted wildlife are birds and bats, which by eating destructive insects provide billions of dollars of economic benefits to the country’s agricultural...
How much water is used by people in the United States?
Since 1950, the USGS has collected and analyzed water-use data for the United States and its Territories . That data is revised every 5 years. As of 2015, the United States uses 322 billion gallons of water per day (Bgal/day). The three largest water-use categories were irrigation (118 Bgal/day), thermoelectric power (133 Bgal/day), and public supply (39 Bgal/day), cumulatively accounting for 90...
How many wind turbines are installed in the U.S. each year?
The number of turbines installed in the U.S. each year varies based on a number of factors, but on average 3,000 turbines have been built in the U.S. each year since 2005. Learn more: Wind Energy U.S. Wind Turbine Database
What materials are used to make wind turbines?
According to a report from the National Renewable Energy Laboratory (Table 30), depending on make and model wind turbines are predominantly made of steel (66-79% of total turbine mass); fiberglass, resin or plastic (11-16%); iron or cast iron (5-17%); copper (1%); and aluminum (0-2%). Many turbine components are domestically sourced and manufactured in the United States. According to the Land...
Why is it important to know the locations of wind turbines?
No publicly-available, national database of wind turbines existed prior to the creation of the USGS Windfarm mapper, which was replaced with the U.S. Wind Turbine Database (USWTDB) in 2018. Knowing the location of individual turbines and their technical specifications creates new opportunities for research and improved siting and is important information for land and resource management. In...
Wind turbine towering over trees
A wind turbine rising above Oʻahu trees forms part of a wind energy installation where USGS bat research is taking place.
A wind turbine rising above Oʻahu trees forms part of a wind energy installation where USGS bat research is taking place.
Wind turbines at the Altamont Pass Wind Farm
The Altamont Pass Wind Far is located in northern California.
The Altamont Pass Wind Far is located in northern California.
Wind turbine on farm land next to a dilapidated barn
Wind turbine next to a dilapidated barn
Wind turbine next to a dilapidated barn
Wind Turbine Blade
This photo shows one of the three 135-ft blades of a turbine before installation. Although the blades of wind turbines appear to move quite slowly to the human eye, blade tips often move at speeds faster than 100 mph.
This photo shows one of the three 135-ft blades of a turbine before installation. Although the blades of wind turbines appear to move quite slowly to the human eye, blade tips often move at speeds faster than 100 mph.