Publications

When a notable earthquake occurs in the United States, a range of familiar real‐ and near‐real‐time products are produced by the U.S. Geological Survey (USGS) Advanced National Seismic System (ANSS), and made available via the ANSS Comprehensive Earthquake Catalog. For historical and early instrumental earthquakes, similar results and products are developed depending on data availability...

Debris flows transport large quantities of water and granular material, such as sediment and wood, and this mixture can have devastating impacts on life and infrastructure. The proportion of large woody debris (LWD) incorporated into debris flows can be enhanced in forested areas recently burned by wildfire, because wood recruitment into channels accelerates in burned forests. In this...

The highly used Global Seismographic Network (GSN) is a pillar of the seismological research community and contributes to numerous groundbreaking publications. Despite its wide recognition, this survey found that the GSN is not consistently acknowledged in scientific literature and is underrepresented by roughly a factor of 3 in citation searches. Publication tracking is a key metric...

Modern seismic data are collected, distributed, and analyzed using digital formats, and this has become a standard for the field. Although most modern seismometers still make use of analog electronic circuits, their data are converted from an analog voltage output to time‐tagged counts by way of digitization. Although much of the digitization process is not complicated to conceptualize...

Increased wildfire activity in the western United States has exposed regional gaps in our understanding of postfire debris-flow generation. To address this problem, we characterized flows in an unstudied area to test the rainfall intensity-duration control of the hazard. Our rainfall measurements and field observations from the northern Sierra Nevada (California, USA) show that debris...

The 6 February 2023 Mw 7.8 Pazarcık and subsequent Mw 7.5 Elbistan earthquakes generated strong ground shaking that resulted in catastrophic human and economic loss across south‐central Türkiye and northwest Syria. The rapid characterization of the earthquakes, including their location, size, fault geometries, and slip kinematics, is critical to estimate the impact of significant seismic...

Earthquakes can impart varying degrees of damage and permanent, inelastic strain on materials, potentially resulting in ruptures that may promote hazards such as landslides and other collapse events. However, the accumulation of damage in rocks under the frequency and amplitude of shaking experienced during earthquake events is rarely systematically measured due to technical limitations...

Landslide susceptibility maps indicate the spatial distribution of landslide likelihood. Modeling susceptibility over large or diverse terrains remains a challenge due to the sparsity of landslide data (mapped extent of known landslides) and the variability in triggering conditions. Several different data sampling strategies of landslide locations used to train a susceptibility model are...

The delineation of faults that pose seismic risk in intraplate seismic zones and the mapping of features associated with failed rift basins can help our understanding of links between the two. We use new high-resolution aeromagnetic data, previous borehole sample information, and reprocessed seismic reflection profiles to image subsurface structures and evaluate recent fault activity...

Wildfire can alter soil-hydraulic properties, often resulting in an increased prevalence of infiltration-excess overland flow and greater potential for debris-flow hazards. Mini disk tension infiltrometers (MDIs) can be used to estimate soil hydraulic properties, such as field-saturated hydraulic conductivity (Kfs) and wetting front potential (Hf), and their spatial variability following...

Most conventional approaches for assessing liquefaction triggering hazards generally rely on simplified procedures that involve identifying liquefaction susceptible layers and calculating a factor of safety against liquefaction (FSL) in each layer. Such procedures utilize deterministic semi-empirical models for standard penetration test (SPT), cone penetrometer test (CPT), or shear wave...

The National Earthquake Hazards Reduction Program (NEHRP) Reauthorization Act of 2018 (Pub.L. 115–307) requires that the Federal Emergency Management Agency (FEMA) “shall support the implementation of a comprehensive earthquake education, outreach, and public awareness program, including development of materials and their wide dissemination to all appropriate audiences and support public...