Publications
Filter Total Items: 2785
Continental rupture and the creation of new crust in the Salton Trough rift, southern California and northern Mexico: Results from the Salton Seismic Imaging Project Continental rupture and the creation of new crust in the Salton Trough rift, southern California and northern Mexico: Results from the Salton Seismic Imaging Project
A refraction and wide-angle reflection seismic profile along the axis of the Salton Trough, California and Mexico, was analyzed to constrain crustal and upper mantle seismic velocity structure during active continental rifting. From the northern Salton Sea to the southern Imperial Valley, the crust is 17-18 km thick and approximately one-dimensional. The transition at depth from Colorado...
Authors
Liang Han, John A. Hole, Joann M. Stock, Gary S. Fuis, Annie Kell, Neal W. Driscoll, Graham M. Kent, Michael J. Rymer, Antonio Gonzalez-Fernandez, Octavio Aburto-Oropeza
Tearing the terroir: Details and implications of surface rupture and deformation from the 24 August 2014 M6.0 South Napa earthquake, California Tearing the terroir: Details and implications of surface rupture and deformation from the 24 August 2014 M6.0 South Napa earthquake, California
The Mw 6.0 South Napa earthquake of 24 August 2014 caused slip on several active fault strands within the West Napa Fault Zone (WNFZ). Field mapping identified 12.5 km of surface rupture. These field observations, near-field geodesy and space geodesy, together provide evidence for more than ~30 km of surface deformation with a relatively complex distribution across a number of...
Authors
Stephen B. DeLong, Andrea Donnellan, Daniel J. Ponti, Ron S. Rubin, James J. Lienkaemper, Carol S. Prentice, Timothy E. Dawson, Gordon G. Seitz, David P. Schwartz, Kenneth W. Hudnut, Carla M. Rosa, Alexandra J. Pickering, Jay W. Parker
Maximum magnitude (Mmax) in the central and eastern United States for the 2014 U.S. Geological Survey Hazard Model Maximum magnitude (Mmax) in the central and eastern United States for the 2014 U.S. Geological Survey Hazard Model
Probabilistic seismic‐hazard assessment (PSHA) requires an estimate of Mmax, the moment magnitude M of the largest earthquake that could occur within a specified area. Sparse seismicity hinders Mmax estimation in the central and eastern United States (CEUS) and tectonically similar regions worldwide (stable continental regions [SCRs]). A new global catalog of moderate‐to‐large SCR...
Authors
Russell L. Wheeler
Developments in new fluid rotational seismometers: Instrument performance and future directions Developments in new fluid rotational seismometers: Instrument performance and future directions
In this article we describe prototype designs and tests for low-cost rota- tional medium- and strong-motion seismometers using three types of proof mass (two liquid and one solid) and a number of transducer configurations. This article describes the third set of designs and tests in our development program. The details of our results for most of these are in the E electronic supplement...
Authors
John R. Evans, Jan T. Kozak, Petr Jedlicka
Far-field pressurization likely caused one of the largest injection induced earthquakes by reactivating a large pre-existing basement fault structure Far-field pressurization likely caused one of the largest injection induced earthquakes by reactivating a large pre-existing basement fault structure
The Mw 5.1 Fairview, Oklahoma, earthquake on 13 February 2016 and its associated seismicity produced the largest moment release in the central and eastern United States since the 2011 Mw 5.7 Prague, Oklahoma, earthquake sequence and is one of the largest earthquakes potentially linked to wastewater injection. This energetic sequence has produced five earthquakes with Mw 4.4 or larger...
Authors
William L. Yeck, Matthew Weingarten, Harley M. Benz, Daniel E. McNamara, E. Bergman, R.B Herrmann, Justin L. Rubinstein, Paul S. Earle
Characterizing the Kathmandu Valley sediment response through strong motion recordings of the 2015 Gorkha earthquake sequence Characterizing the Kathmandu Valley sediment response through strong motion recordings of the 2015 Gorkha earthquake sequence
We analyze strong motion records and high-rate GPS measurements of the M 7.8 Gorkha mainshock, M 7.3 Dolakha, and two moderate aftershock events recorded at four stations on the Kathmandu basin sediments, and one on rock-outcrop. Recordings on soil from all four events show systematic amplification relative to the rock site at multiple frequencies in the 0.1–2.5 Hz frequency range, and...
Authors
S. Rajaure, Domniki Asimaki, Eric M. Thompson, Susan E. Hough, Stacey Martin, J.P. Ampuero, M.R. Dhital, A Inbal, N Takai, M. Shigefuji, S Bijukchhen, M Ichiyanagi, T Sasatani, L Paudel
Learning from the recent Taiwan Meinong Earthquake Learning from the recent Taiwan Meinong Earthquake
This paper highlights the lessons learned following a reconnaissance trip to Tainan, Taiwan two weeks after the February 2016 earthquake. The reconnaissance was conducted by Gilsanz, Murray Steficek engineers (GMS) and an earthquake engineer from the United States Geological Survey (USGS), in collaboration with the Earthquake Engineering Research Institute (EERI), the Applied Technical...
Authors
Ramon Gilsanz, Cathy Huang, Jessica Mandrick, Joe Mugford, Cerea Steficek, Mehmet Celebi, Sheng-Jhih Jhuang
Scaling relation between earthquake magnitude and the departure time from P wave similar growth Scaling relation between earthquake magnitude and the departure time from P wave similar growth
We introduce a new scaling relation between earthquake magnitude (M) and a characteristic of initial P wave displacement. By examining Japanese K-NET data averaged in bins partitioned by Mw and hypocentral distance, we demonstrate that the P wave displacement briefly displays similar growth at the onset of rupture and that the departure time (Tdp), which is defined as the time of...
Authors
Shunta Noda, William L. Ellsworth
Seismic imaging beneath an InSAR anomaly in eastern Washington State: Shallow faulting associated with an earthquake swarm in a low-hazard area Seismic imaging beneath an InSAR anomaly in eastern Washington State: Shallow faulting associated with an earthquake swarm in a low-hazard area
In 2001, a rare swarm of small, shallow earthquakes beneath the city of Spokane, Washington, caused ground shaking as well as audible booms over a five‐month period. Subsequent Interferometric Synthetic Aperture Radar (InSAR) data analysis revealed an area of surface uplift in the vicinity of the earthquake swarm. To investigate the potential faults that may have caused both the...
Authors
William J. Stephenson, Jackson K. Odum, Charles W. Wicks, Thomas L. Pratt, Richard J. Blakely
Hydrothermal frictional strengths of rock and mineral samples relevant to the creeping section of the San Andreas Fault Hydrothermal frictional strengths of rock and mineral samples relevant to the creeping section of the San Andreas Fault
We compare frictional strengths in the temperature range 25–250 °C of fault gouge from SAFOD (CDZ and SDZ) with quartzofeldspathic wall rocks typical of the central creeping section of the San Andreas Fault (Great Valley sequence and Franciscan Complex). The Great Valley and Franciscan samples have coefficients of friction, μ > 0.35 at all experimental conditions. Strength is unchanged...
Authors
Diane E. Moore, David A. Lockner, Stephen H. Hickman
Faulting, damage, and intensity in the Canyondam earthquake of May 23, 2013 Faulting, damage, and intensity in the Canyondam earthquake of May 23, 2013
On Thursday evening, May 23, 2013 (0347 May 24 UTC), a moment magnitude (Mw) = 5.7 earthquake occurred northeast of Canyondam, California. A two-person team of U.S. Geological Survey scientists went to the area to search for surface rupture and to canvass damage in the communities around Lake Almanor. While the causative fault had not been identified at the time of the field survey...
Authors
K. Chapman, M.B. Gold, John Boatwright, J. Sipe, V. Quitoriano, D. Dreger, Jeanne Hardebeck
Gallery of melt textures developed in Westerly Granite during high-pressure triaxial friction experiments Gallery of melt textures developed in Westerly Granite during high-pressure triaxial friction experiments
Introduction Melting occurred during stick-slip faulting of granite blocks sheared at room-dry, room-temperature conditions in a triaxial apparatus at 200–400 megapascals (MPa) confining pressure. Petrographic examinations of melt textures focused largely on the 400-MPa run products. This report presents an overview of the petrographic data collected on those samples, followed by brief...
Authors
Diane E. Moore, David A. Lockner, Brian D. Kilgore, Nicholas M. Beeler