# What is the difference between magnitude and intensity? What is the Modified Mercalli Intensity Scale?

Magnitude scales, like the moment magnitude, measure the size of the earthquake at its source. An earthquake has one magnitude. The magnitude do not depend on where the measurement is made. Often, several slightly different magnitudes are reported for an earthquake. This happens because the relation between the seismic measurements and the magnitude is complex and different procedures will often give slightly different magnitudes for the same earthquake.

Intensity scales, like the Modified Mercalli Scale and the Rossi-Forel scale, measure the amount of shaking at a particular location. An earthquake causes many different intensities of shaking in the area of the epicenter where it occurs. So the intensity of an earthquake will vary depending on where you are. Sometimes earthquakes are referred to by the maximum intensity they produce.

In the United States, we use the Modified Mercalli (MMI) Scale. The Mercalli Scale is based on observable earthquake damage. From a scientific standpoint, the magnitude scale is based on seismic records while the Mercalli is based on observable data which can be subjective. Thus, the magnitude scale is considered scientifically more objective and therefore more accurate. For example a level I-V on the Mercalli scale would represent a small amount of observable damage. At this level doors would rattle, dishes break and weak or poor plaster would crack. As the level rises toward the larger numbers, the amount of damage increases considerably. Intensity X (10) is the highest value on the MMI.

## Related Content

Filter Total Items: 11

### What is a Geoid? Why do we use it and where does its shape come from?

Contrast of the Geoid model with an Ellipsoid and cross-section of the Earth's surface. (Public domain.) A geoid is the irregular-shaped “ball” that scientists use to more accurately calculate depths of earthquakes, or any other deep object beneath the earth’s surface...

### Seismometers, seismographs, seismograms - what's the difference? How do they work?

A seismometer is the internal part of the seismograph , which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph". Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a...

### How can I make my own seismometer?

It is relatively easy to acquire the necessary materials and build your own seismometer. The links here are to various sources with information on how to build a seismometer. They range from very simple and inexpensive to sophisticated and pricey. Model Seismograph - Classroom Demonstration Build your own Seismograph Station Build Your Own...

### What was the first instrument that actually recorded an earthquake?

The earliest seismoscope was invented by the Chinese philosopher Chang Heng in A.D. 132. This was a large urn on the outside of which were eight dragon heads facing the eight principal directions of the compass. Below each dragon head was a toad with its mouth opened toward the dragon. When an earthquake occurred, one or more of the eight dragon-...

### What was the duration of the earthquake? Why don't you report the duration of each earthquake? How does the duration affect the magnitude?

The duration of an earthquake is related to its magnitude but not in a perfectly strict sense. There are two ways to think about the duration of an earthquake. The first is the length of time it takes for the fault to rupture and the second is the length of time shaking is felt at any given point (e.g. when someone says "I felt it shake for 10...

### How can an earthquake have a negative magnitude?

Magnitude calculations are based on a logarithmic scale, so a ten-fold drop in amplitude decreases the magnitude by 1. If an amplitude of 20 millimetres as measured on a seismic signal corresponds to a magnitude 2 earthquake, then: 10 times less (2 millimetres) corresponds to a magnitude of 1; 100 times less (0.2 millimetres) corresponds to...

### What does it mean that the earthquake occurred at a depth of 0 km? How can an earthquake have a negative depth; that would mean it’s in the air. What is the geoid, and what does it have to do with earthquake depth?

An earthquake cannot physically occur at a depth of 0 km or -1km (above the surface of the earth). In order for an earthquake to occur, two blocks of crust must slip past one another, and it is impossible for this to happen at or above the surface of the earth. So why do we report that the earthquake occurred at a depth of 0 km or event as a...

### How do seismologists locate an earthquake?

When an earthquake occurs, one of the first questions is "where was it?" The location may tell us what fault it was on and where damage (if any) most likely occurred. Unfortunately, Earth is not transparent and we can't just see or photograph the earthquake disturbance like meteorologists can photograph clouds. When an earthquake occurs, it...

### How are earthquakes recorded? How are earthquakes measured? How is the magnitude of an earthquake determined?

Earthquakes are recorded by a seismographic network . Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy...

### Moment magnitude, Richter scale - what are the different magnitude scales, and why are there so many?

Earthquake size, as measured by the Richter Scale is a well known, but not well understood, concept. The idea of a logarithmic earthquake magnitude scale was first developed by Charles Richter in the 1930's for measuring the size of earthquakes occurring in southern California using relatively high-frequency data from nearby seismograph stations...

### How do you determine the magnitude for an earthquake that occurred prior to the creation of the magnitude scale?

For earthquakes that occurred between about 1890 (when modern seismographs came into use) and 1935 when Charles Richter developed the magnitude scale, people went back to the old records and compared the seismograms from those days with similar records for later earthquakes. For earthquakes prior to about 1890, magnitudes have been estimated by...
Filter Total Items: 3
Date published: May 25, 2017

### Updated USGS Earthquake Monitoring Strategy Released

The USGS Earthquake Hazards Program recently released a new strategic plan for earthquake monitoring entitled the “Advanced National Seismic System – Current Status, Development Opportunities, Priorities, 2017-2027.”

Date published: January 23, 2012

### A 100-year-long History of Earthquakes and Seismic Monitoring in Hawaii

The Hawaiian Volcano Observatory’s 1912–2012 Centennial—100 Years of Tracking Eruptions and Earthquakes

HAWAI‘I ISLAND, Hawaii —The history of earthquakes and seismic monitoring in Hawai‘i during the past century will be the topic of a presentation at the University of Hawai‘i at Hilo on Thursday, January 26, at 7:00 p.m.

Date published: September 24, 2009

### Recovery Act Funds Will Upgrade Earthquake Monitoring

USGS will Grant Universities $5 Million to Beef Up Public Safety Grants totaling$5 million under the American Recovery and Reinvestment Act are being awarded to 13 universities nationwide to upgrade critical earthquake monitoring networks and increase public safety.

Filter Total Items: 6
December 31, 2017

### California Seismicity

Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.

February 28, 2017

### USGS Forecast for Ground Shaking Intensity from Earthquakes in 2017

USGS map displaying intensity of potential ground shaking from natural and human-induced earthquakes. There is a small chance (one percent) that ground shaking intensity will occur at this level or higher. There is a greater chance (99 percent) that ground shaking will be lower than what is displayed in these maps.

August 31, 2016

### Eastern Earthquakes

This map shows earthquakes above magnitude 4.0 in the eastern United States since 1973, the first year with a complete catalog. There are 184 earthquakes recorded. An earthquake of magnitude 4.0 or greater can cause minor or more significant damage. The circle sizes correspond to earthquake magnitude, ranging from 4.0 to 5.9 (the largest was in the Gulf of Mexico).