Publications

The U.S. Geological Survey National Crustal Model (NCM) is being developed to assist with earthquake hazard and risk assessment by supporting estimates of ground shaking in response to an earthquake. The period-dependent intensity and duration of shaking depend upon the three-dimensional seismic velocity, seismic attenuation, and density distribution of a region, which in turn is...

In this paper we summarize data, methods, and models developed for a probabilistic assessment of fault displacement hazards across the U.S. We compare earthquake displacement data and empirical fault displacement models that have been developed for normal faults, strike-slip faults, and reverse faults. In general, the data and models are similar near the center of the fault for the three...

The 2014 U.S. Geological Survey national seismic hazard model for the conterminous U.S. will be updated in 2018 and 2020 to coincide with the Building Seismic Safety Council’s Project 17 timeline for development of new building code design criteria. The two closely timed updates are planned to allow more time for the Provisions Update Committee to analyze the consequences of the hazard...

The understanding of earthquake risk is the first step towards the development and implementation of disaster risk reduction measures. However, in many countries, especially the countries of the developing world, earthquake risk models either do not exist or are publicly inaccessible. The Global Earthquake Model (GEM) Foundation and its partners have been supporting regional programmes...

No abstract available.

In this study, a nonlinear model of a two-story multifamily wood-frame residential structure is subjected to recordings of sequences of induced earthquakes in order to quantify changes in fragility and accumulation of damage throughout multiple earthquake loadings. Initial efforts consisting of ground motion selection, building design, numerical modeling, and preliminary results are...

Geoscience Australia has recently released its 2018 National Seismic Hazard Assessment (NSHA18). Results from the NSHA18 indicate significantly lower seismic hazard across almost all Australian localities at the 1/500 annual exceedance probability level relative to the factors adopted for the current Australian Standard AS1170.4–2007 (R2018). These new hazard estimates, coupled with...

High‐resolution lidar reveals newly recognized evidence of strong shaking in the New Madrid seismic zone in the central United States. We mapped concentrations of sackungen (ridgetop spreading features) on bluffs along the eastern Mississippi River valley in northwestern Tennessee that likely form or are reactivated during large earthquakes. These sackungen are concentrated on the...

The Albuquerque Seismological Laboratory (ASL) has preserved a collection of photographs of seismographic equipment, stations, and drawings used by the United States Coast and Geodetic Survey (USC&GS) in the early-to-mid-twentieth century. The photographs were transferred to ASL from the US Department of Commerce building in Washington DC after ASL became established as a USC&GS facility...

Here, we introduce the first openly available comprehensive database of magnetotelluric (MT) and related electromagnetic data that we developed and matured over the past decade, explain how to access the data, and describe the challenges that had to be overcome to make MT data sharing possible. The database is a helpful tool for MT scientists, and is widely used by the international...

Maps are presented of extreme‐value geoelectric field amplitude and horizontal polarization for the Northeast United States. These maps are derived from geoelectric time series calculated for sites across the Northeast by frequency‐domain multiplication (time‐domain convolution) of 172 magnetotelluric impedance tensors, acquired during a survey, with decades‐long, 1‐min resolution time...

Tensiometer-equipped data acquisition systems measure and record positive and negative soil-water pressures. These data contribute to studies in hillslope hydrology, including analyses of rainfall runoff, near-surface hydrologic response, and slope stability. However, the unique ability of a tensiometer to rapidly and accurately measure pre- and post-saturation subsurface pressures...