This page lists the key milestones of the Landsat Data Continuity Mission (LDCM) - now known as Landsat 8.
April 2013: LDCM Initial Operating Capability (IOC). This will follow the successful completion of the LDCM on-orbit commissioning phase whereby LDCM is prepared for normal and routine operations. IOC will be declared following a successful Post-Launch Assessment Review (PLAR) and Operational Readiness Review (ORR).
February 11-14, 2013: Landsat Science Team Meeting. The meetings will be held in support and in conjunction of the LDCM launch.
February 11, 2013: Spacecraft Launch. LDCM will launch from Space Launch Complex 3 at Vandenberg Air Force Base in California, USA, on Monday, February 11, 2013. Launch time is set for 10:02 a.m. Pacific Standard Time, with a launch window of 48 minutes.
February 8, 2013: Launch Readiness Review (LRR). This review will be held at Vandenberg Air Force Base.
February 7, 2013: Mission Dress Rehearsal. A launch dress rehearsal is done in preparation for the upcoming mission and provides all team members an opportunity to participate in simulated countdown activities.
February 6: Flight Readiness Review (FRR). This review will be held at Vandenberg Air Force Base. The FRR will consist of audits and examinations of all flight and ground hardware, software, personnel, and procedures to ensure all are ready to proceed into operations.
January 30, 2013: LDCM KDP-E. This milestone occurred following successful system assembly, integration and test. Prior to KDP-E, the project must demonstrate high confidence that the LDCM will be able to meet system requirements, conduct launch and early orbit operations, and meet operational performance expectations. KDP-E will be declared following a successful Flight Readiness Review held for the LDCM Standing Review Board.
January 25, 2013: Transport to Launch Pad. The payload fairing was transported to Space Launch Complex 3 at Vandenberg Air Force Base in California.
January 23, 2013: Fairing Encapsulation. The LDCM spacecraft was successfully placed into the payload fairing of the Atlas-V rocket that will carry the instrument into space.
January 22, 2013: Safety and Mission Success Review (SMSR) at NASA HQ.
October 2011: LDCM KDP-D. This milestone occurred following a successful series of system and mission critical design activities, whereby the detailed design of the entire system was completed and successfully fabricated, including all hardware, software, and operational components. KDP-D was declared following a successful Mission Integration Review held for the LDCM Standing Review Board.
December 2009: LDCM KDP-C. This milestone occurred following a successful series of system and mission preliminary design activities whereby an initial baseline capable of meeting mission needs (requirements) was established. KDP-C was declared following a successful Mission Confirmation Review held for NASA Headquarters
September 2008: LDCM KDP-B. This milestone occurred following a successful series of concept and technology development activities whereby the feasibility of the mission concept was measured, system requirements were generated and independently reviewed, and an Initial Confirmation Review was successfully held with NASA Headquarters.