NGP Standards and Specifications

3D Elevation Program Standards and Specifications

The 3DEP products and services available through The National Map consist of standard digital elevation models (DEMs) at various horizontal resolutions, elevation source (lidar) and associated datasets, and web applications and visualization services. Products of the 3D Elevation Program are built upon the most current applicable standards for geospatial data.  

Lidar Base Specification

Lidar Base Specification

The Lidar Base Specification (LBS) is the source of requirements for collections under the 3D Elevation Program (3DEP). The latest version of the specification is LBS 2021 rev. A, released in June 2021. 


Elevation Specification Resources

Elevation Specification Resources

A collection of resources in support of the 3D Elevation Program (3DEP). This includes the Lidar Error Dictionary. 


The National Map Elevation Datasets

The National Map serves elevation data for the United States at a variety of resolutions. The most recent and highest resolution elevation data are acquired by the USGS 3D Elevation Program. The primary goal of 3DEP is to systematically collect 3D elevation data in the form of light detection and ranging (lidar) data over the conterminous United States, Hawaii, and the U.S. territories and interferometric synthetic aperture radar (IfSAR) in Alaska. 

Digital Elevation Models

The lower resolution DEMs are available in a nation-wide seamless layer and are covered by The National Map Seamless Digital Elevation Model Specifications. These products, specified by the horizontal resolution, are 

  • 1/3-arc-second
  • 1-arc-second
  • 2-arc-second

Higher resolution DEMs are available in limited areas and are seamless on a project-level but not nation-wide. Please note that the primary goal of 3DEP is to produce the highest resolution, 1-meter, layer nation-wide, based on lidar (5-meter in Alaska based on IfSAR). The higher resolution DEMs are covered, in part, by the 1-Meter Digital Elevation Model Specification. These products are

  • 1/9-arc-second (being replaced by 1-meter products)
  • 1-meter
  • 5-meter (Alaska)


Light Detection and Ranging (lidar) is the technology used as a basis for the 1-meter 3DEP DEMs. Collections of lidar data are covered by the Lidar Base Specification (LBS).  

3DEP Product Metadata

Metadata Explorer Application for 3DEP products conform to the Federal Geographic Data Committee's content standard for digital geospatial metadata.

Spatial metadata for 3DEP products are available through the Work-unit Extent Spatial Metadata (WESM)

3DEP Product Standards

3DEP products are documented using the Federal Geographic Data Committee (FGDC) content standard for geospatial metadata. 3DEP products are searchable collections through the Open Government Initiative. Elevation products are provided in formats that are fully compliant with Executive Order 12906, OMB Circular A-16, OMB Circular A130 , and OMB Circular A-119.

If you encounter problems or require more information about these standards, please contact National Map Help.