Publications
Filter Total Items: 2785
An updated geospatial liquefaction model for global application An updated geospatial liquefaction model for global application
We present an updated geospatial approach to estimation of earthquake-induced liquefaction from globally available geospatial proxies. Our previous iteration of the geospatial liquefaction model was based on mapped liquefaction surface effects from four earthquakes in Christchurch, New Zealand, and Kobe, Japan, paired with geospatial explanatory variables including slope-derived VS30...
Authors
Jing Zhu, Laurie G. Baise, Eric M. Thompson
Repeatability of testing a small broadband sensor in the Albuquerque Seismological Laboratory Underground Vault Repeatability of testing a small broadband sensor in the Albuquerque Seismological Laboratory Underground Vault
Variability in seismic instrumentation performance plays a fundamental role in our ability to carry out experiments in observational seismology. Many such experiments rely on the assumed performance of various seismic sensors as well as on methods to isolate the sensors from nonseismic noise sources. We look at the repeatability of estimating the self‐noise, midband sensitivity, and the...
Authors
Adam T. Ringler, Austin Holland, David C. Wilson
The 2008 Wells, Nevada earthquake sequence: Source constraints using calibrated multiple event relocation and InSAR The 2008 Wells, Nevada earthquake sequence: Source constraints using calibrated multiple event relocation and InSAR
The 2008 Wells, NV earthquake represents the largest domestic event in the conterminous U.S. outside of California since the October 1983 Borah Peak earthquake in southern Idaho. We present an improved catalog, magnitude complete to 1.6, of the foreshock-aftershock sequence, supplementing the current U.S. Geological Survey (USGS) Preliminary Determination of Epicenters (PDE) catalog with...
Authors
Jennifer Nealy, Harley M. Benz, Gavin P. Hayes, Eric Berman, William D. Barnhart
A note on adding viscoelasticity to earthquake simulators A note on adding viscoelasticity to earthquake simulators
Here, I describe how time‐dependent quasi‐static stress transfer can be implemented in an earthquake simulator code that is used to generate long synthetic seismicity catalogs. Most existing seismicity simulators use precomputed static stress interaction coefficients to rapidly implement static stress transfer in fault networks with typically tens of thousands of fault patches. The...
Authors
Frederick Pollitz
System identification based on deconvolution and cross correlation: An application to a 20‐story instrumented building in Anchorage, Alaska System identification based on deconvolution and cross correlation: An application to a 20‐story instrumented building in Anchorage, Alaska
Deconvolution and cross‐correlation techniques are used for system identification of a 20‐story steel, moment‐resisting frame building in downtown Anchorage, Alaska. This regular‐plan midrise structure is instrumented with a 32‐channel accelerometer array at 10 levels. The impulse response functions (IRFs) and correlation functions (CFs) are computed based on waveforms recorded from...
Authors
Weiping Wen, Erol Kalkan
Spatio-temporal mapping of plate boundary faults in California using geodetic imaging Spatio-temporal mapping of plate boundary faults in California using geodetic imaging
The Pacific–North American plate boundary in California is composed of a 400-km-wide network of faults and zones of distributed deformation. Earthquakes, even large ones, can occur along individual or combinations of faults within the larger plate boundary system. While research often focuses on the primary and secondary faults, holistic study of the plate boundary is required to answer...
Authors
Andrea Donnellan, Ramon Arrowsmith, Stephen B. DeLong
Geodetic slip model of the 3 September 2016 Mw 5.8 Pawnee, Oklahoma, earthquake: Evidence for fault‐zone collapse Geodetic slip model of the 3 September 2016 Mw 5.8 Pawnee, Oklahoma, earthquake: Evidence for fault‐zone collapse
The 3 September 2016 Mw 5.8 Pawnee earthquake in northern Oklahoma is the largest earthquake ever recorded in Oklahoma. The coseismic deformation was measured with both Interferometric Synthetic Aperture Radar and Global Positioning System (GPS), with measureable signals of order 1 cm and 1 mm, respectively. We derive a coseismic slip model from Sentinel‐1A and Radarsat 2 interferograms...
Authors
Frederick Pollitz, Charles W. Wicks, Martin Schoenball, William L. Ellsworth, Mark Murray
Finite‐fault Bayesian inversion of teleseismic body waves Finite‐fault Bayesian inversion of teleseismic body waves
Inverting geophysical data has provided fundamental information about the behavior of earthquake rupture. However, inferring kinematic source model parameters for finite‐fault ruptures is an intrinsically underdetermined problem (the problem of nonuniqueness), because we are restricted to finite noisy observations. Although many studies use least‐squares techniques to make the finite...
Authors
Brandon Clayton, Stephen H. Hartzell, Morgan P. Moschetti, Sarah E. Minson
Advanced National Seismic System—Current status, development opportunities, and priorities for 2017–2027 Advanced National Seismic System—Current status, development opportunities, and priorities for 2017–2027
Summary Earthquakes pose a threat to the safety of over 143 million people living in the United States. Earthquake impacts can be significantly reduced if communities understand their risk and take proactive steps to mitigate that risk. The Advanced National Seismic System (ANSS) is a cooperative effort to collect and analyze seismic and geodetic data on earthquakes, issue timely and...
Authors
3.5 square meters: Constructive responses to natural disasters 3.5 square meters: Constructive responses to natural disasters
Natural disasters and their consequences dominate the news almost on a daily basis. Quick-impact preventive and aid measures are essential for the victims to survive. This volume presents a selection of projects which demonstrate impressively how both cutting-edge technology and locally available materials and resources can be used for this purpose.
Poroelastic properties of the Arbuckle Group in Oklahoma derived from well fluid level response to the 3 September 2016 Mw 5.8 Pawnee and 7 November 2016 Mw 5.0 Cushing earthquakes Poroelastic properties of the Arbuckle Group in Oklahoma derived from well fluid level response to the 3 September 2016 Mw 5.8 Pawnee and 7 November 2016 Mw 5.0 Cushing earthquakes
The Arbuckle Group (Arbuckle) is a basal sedimentary unit that is the primary target for saltwater disposal in Oklahoma. Thus, the reservoir characteristics of the Arbuckle, including how the poroelastic properties change laterally and over time are of significant interest. We report observations of fluid level changes in two monitoring wells in response to the 3 September 2016 Mw 5.8...
Authors
Kayla A. Kroll, Elizabeth S. Cochran, Kyle E. Murray
Evidence for distributed clockwise rotation of the crust in the northwestern United States from fault geometries and focal mechanisms Evidence for distributed clockwise rotation of the crust in the northwestern United States from fault geometries and focal mechanisms
Paleomagnetic and GPS data indicate that Washington and Oregon have rotated clockwise for the past 16 Myr. Late Cenozoic and Quaternary fault geometries, seismicity lineaments, and focal mechanisms provide evidence that this rotation is accommodated by north directed thrusting and right-lateral strike-slip faulting in Washington, and SW to W directed normal faulting and right-lateral...
Authors
Thomas M. Brocher, Ray E. Wells, Andrew P. Lamb, Craig S. Weaver