How are UTM coordinates measured on a USGS topographic maps? Are UTM ticks shown on all topographic maps?

The UTM (Universal Transverse Mercator) coordinate system divides the world into sixty north-south zones, each 6 degrees of longitude wide. UTM zones are numbered consecutively beginning with Zone 1, which includes the westernmost point of Alaska, and progress eastward to Zone 16, which includes Maine. If UTM ticks are shown on a USGS topographic map, the zone is indicated in the credit legend in the lower left corner of the map collar.

Within each zone, coordinates are measured as northings and eastings in meters. The northing values are measured from zero at the equator in a northerly direction. Each zone has a central meridian that is assigned an easting value of 500,000 meters. In Zone 16, for example, the central meridian is at 87 degrees longitude west. One meter east of that central meridian is 500,001 meters easting. 

Screenshot of map corner showing two grid lines and their UTM coordinates

US Topo map showing latitude and longitude of the corner (38°N, -115.8750°W) and brown UTM gridlines (4,206,000 meters northing and 599,000 meters easting)

(Public domain.)

All USGS topographic maps produced after 1977 should show UTM tick marks on the sides of the map every 1,000 meters. Some maps, including all those produced after 2009 (US Topo maps) include full UTM grid lines. To make UTM measurements, subdivide the 1,000-meter grid squares into tenths or hundredths. This narrows down the coordinate to a 100 meter or 10 meter square. Measurements can be made using a gridded mylar overlay, a paper scale, or a coordinate reader.

Note that the large numbers adjacent to the tick marks around the perimeter of the map represent tens of thousands and thousands of meters. The millions and hundreds of thousands of meters are shown with small numbers and are sometimes dropped when giving UTM coordinate positions. The military implementation of UTM (Military Grid Reference System or MGRS) drops the small digits and indicates the 100,000 meter square by a two letter identifier. Most UTM users and GPS (Global Positioning System) units use the full value of the UTM coordinates.

Learn more:

Related Content

Filter Total Items: 9

How do I find, download, or order topographic maps?

Download all dates and scales of USGS topographic maps (both current US Topo maps and Historical topographic maps ) free of charge from the following applications. With the exception of GNIS, each site has an option for toggling on map indices showing an outline of all the maps, though you might need to zoom in to see the outlines: Map Locator on...

Where can I find indexes of USGS topographic maps?

View map indices on these interactive maps (you must zoom in to see the index lines and map names) : Map Locator on the USGS Store - Click the icon on the left that looks like two pieces of paper and select “1:24,000”. TopoView - Click on any of the round map scale indicators on the right side of the map. The National Map Viewer - Click on the...

Why don’t all USGS 7.5 minute topographic maps show the UTM grid?

For maps in the Historical Topographic Map Collection (1884-2006): Through time, policies have changed regarding whether or not a full UTM grid would appear on the 7.5-minute map series. Beginning in the mid 1950's, the grid was indicated by blue ticks around the map at 1000 meter spacing. In 1979, the ticks were replaced with a full-line black...

Why are the NAD 83 position values so far from the NAD 27 values? Were the old coordinates wrong?

The old coordinates were not wrong, just different. They are based on different earth shapes or ellipsoids and were based on the best technology at the time. Mathematically, NAD83 is a stronger datum because all previously existing horizontal stations and newer GPS surveyed stations were adjusted simultaneously. The positions within NAD27 were...

What does the term UTM mean? Is UTM better or more accurate than latitude/longitude?

UTM is the acronym for Universal Transverse Mercator, a plane coordinate grid system named for the map projection on which it is based (Transverse Mercator). The UTM system consists of 60 zones, each 6-degrees of longitude in width. The zones are numbered 1-60, beginning at 180-degrees longitude and increasing to the east. The military uses their...

What is the State Plane Coordinate System? Can GPS provide coordinates in these values?

The State Plane Coordinate System (SPCS), which is only used in the United States, is a plane coordinate system (north-south and east-west lines are perpendicular) in which each individual state has between one to six zones, depending on the state's size and shape. This coordinate system’s high level of accuracy is achieved through the use of...

How large is the North American Datum (NAD) 27 to NAD 83 shift?

Within the conterminous 48 states, the NAD27-NAD83 shift of the latitude/longitude graticule (lines showing parallels of latitude and meridians of longitude for the earth) is in the range of 10-100 ground meters . Changes to UTM values are generally larger, around 200 meters, and changes for other coordinate systems are different. For more detail...

How are different map projections used?

The method used to portray a part of the spherical Earth on a flat surface, whether a paper map or a computer screen, is called a map projection. No flat map can rival a globe in truly representing the surface of the entire Earth, so every flat map misrepresents the surface of the Earth in some way. A flat map can show one or more--but never all--...

Why don't Forest Service maps have Universal Transverse Mercator (UTM) grids?

The Universal Transverse Mercator (UTM) grid is not used on the Forest Visitor Map series because of the maps’ small scale and intended use. The more detailed Wilderness and Special Area maps published by the Forest Service (some of which are available through the USGS Store ) might have UTM grid ticks. UTM grids are included on all US Topo maps (...
Filter Total Items: 2
Date published: July 5, 2017

Finding Yourself Outdoors

Updated USGS digital topographic maps feature more trails and other recreation points of interest

Date published: August 18, 2016

Story Map - Topographic Maps for the Nation

The USGS National Geospatial Program has released an interactive Story Map giving viewers an overview of the US Topo map program

Filter Total Items: 7
December 18, 2017

Lesson 9a: Accessing US Topo and Historical USGS Topographic Maps

In this lesson, we will discuss the USGS Store and how it can be used to access the US Topo and historical USGS Topographic maps. Specifically, this lesson will talk about the USGS Store, both where it’s accessed and what’s available at the store, as well as how you can locate and download free topographic maps through the store. 
 

Screen shot of US Topo Story Map
August 18, 2016

US Topo Story Map – Topographic Maps for the Nation

US Topo Story Map – Topographic Maps for the Nation

Santa Fe, New Mexico 2013 US Topo map showing PLSS data
July 22, 2016

Santa Fe, New Mexico 2013 US Topo quadrangle, showing PLSS data

Santa Fe, New Mexico 2013 US Topo quadrangle, showing PLSS data with contour, orthoimage and woodland layers off. Note: "US Topo maps are not legal documents. The PLSS information shown on these maps is for general reference purposes only, and should not be used to determine legal boundaries or land ownership. The Bureau of Land Management (BLM) is the authoritative source

...
Photo of Santa Fe, New Mexico 2013 United States Topo map
July 22, 2016

Santa Fe, New Mexico 2013 US Topo quadrangle

Santa Fe, New Mexico 2013 US Topo quadrangle, with orthoimage off. 

2014 US Topo map of the Florence, Alabama
April 25, 2016

2014 US Topo map of the Florence, Alabama

2014 US Topo map of the Florence, Alabama area with the shaded relief and image layter turned on.