Skip to main content
U.S. flag

An official website of the United States government

Publications

Results from our Program’s research and minerals information activities are published in USGS publications series as well as in outside journals.  To follow Minerals Information Periodicals, subscribe to the Mineral Periodicals RSS feed.

Filter Total Items: 2592

China's rare-earth industry China's rare-earth industry

Introduction China's dominant position as the producer of over 95 percent of the world output of rare-earth minerals and rapid increases in the consumption of rare earths owing to the emergence of new clean-energy and defense-related technologies, combined with China's decisions to restrict exports of rare earths, have resulted in heightened concerns about the future availability of rare...
Authors
Pui-Kwan Tse

Review of the origin of the Braid Scarp near the Pebble prospect, southwestern Alaska Review of the origin of the Braid Scarp near the Pebble prospect, southwestern Alaska

A linear geomorphic scarp, referred to as the 'Braid Scarp,' lies about 5 kilometers north of Iliamna Lake, Alaska, and has been identified as a possible seismically active fault. We examined the geomorphology of the area and an 8.5-meter-long excavation across the scarp. We conclude that the scarp was formed by incision of a glacial outwash braid plain into a slightly older outwash...
Authors
Peter J. Haeussler, Christopher F. Waythomas

Detecting Cheatgrass on the Colorado Plateau using Landsat data: A tutorial for the DESI software Detecting Cheatgrass on the Colorado Plateau using Landsat data: A tutorial for the DESI software

Invasive plant species disrupt native ecosystems and cause economic harm to public lands. In this report, an example of applying the Detection of Early Season Invasives software to mapping cheatgrass infestations is given. A discussion of each step of the DESI process is given, including selection of Landsat images. Tutorial data, covering a semi-arid area in southern Utah, are...
Authors
Raymond F. Kokaly

Geophysical setting of the February 21, 2008 Mw 6 Wells earthquake, Nevada, and implications for earthquake hazards Geophysical setting of the February 21, 2008 Mw 6 Wells earthquake, Nevada, and implications for earthquake hazards

We utilize gravity and magnetic methods to investigate the regional geophysical setting of the Wells earthquake. In particular, we delineate major crustal structures that may have played a role in the location of the earthquake and discuss the geometry of a nearby sedimentary basin that may have contributed to observed ground shaking. The February 21, 2008 Mw 6.0 Wells earthquake...
Authors
David A. Ponce, Janet T. Watt, C. Bouligand

The regional structural setting of the 2008 Wells earthquake and Town Creek Flat Basin: implications for the Wells earthquake fault and adjacent structures The regional structural setting of the 2008 Wells earthquake and Town Creek Flat Basin: implications for the Wells earthquake fault and adjacent structures

The 2008 Wells earthquake occurred on a northeast-striking, southeast-dipping fault that is clearly delineated by the aftershock swarm to a depth of 10-12 km below sea level. However, Cenozoic rocks and structures around Wells primarily record east-west extension along north- to north-northeast-striking, west-dipping normal faults that formed during the middle Miocene. These faults are...
Authors
Christopher S. Henry, Joseph P. Colgan

The Edwardsburg Formation and related rocks, Windermere Supergroup, central Idaho, USA The Edwardsburg Formation and related rocks, Windermere Supergroup, central Idaho, USA

In central Idaho, Neoproterozoic stratified rocks are engulfed by the Late Cretaceous Idaho batholith and by Eocene volcanic and plutonic rocks of the Challis event. Studied sections in the Gospel Peaks and Big Creek areas of west-central Idaho are in roof pendants of the Idaho batholith. A drill core section studied from near Challis, east-central Idaho, lies beneath the Challis...
Authors
Karen Lund, John N. Aleinikoff, Karl V. Evans

Secular trends in the geologic record and the supercontinent cycle Secular trends in the geologic record and the supercontinent cycle

Geologic secular trends are used to refine the timetable of supercontinent assembly, tenure, and breakup. The analysis rests on what is meant by the term supercontinent, which here is defined broadly as a grouping of formerly dispersed continents. To avoid the artificial pitfall of an all-or-nothing definition, quantitative measures of “supercontinentality” are presented: the number of...
Authors
Dwight Bradley

Episodic growth of a Late Cretaceous and Paleogene intrusive complex of pegmatitic leucogranite, Ruby Mountains core complex, Nevada, USA Episodic growth of a Late Cretaceous and Paleogene intrusive complex of pegmatitic leucogranite, Ruby Mountains core complex, Nevada, USA

Gneissic pegmatitic leucogranite forms a dominant component (>600 km3) of the midcrustal infrastructure of the Ruby Mountains–East Humboldt Range core complex (Nevada, USA), and was assembled and modified episodically into a batholithic volume by myriad small intrusions from ca. 92 to 29 Ma. This injection complex consists of deformed sheets and other bodies emplaced syntectonically into...
Authors
Keith A. Howard, J. L. Wooden, C. G. Barnes, W. R. Premo, A.W. Snoke, S.-Y. Lee

Stratigraphy and chronology of offshore to nearshore deposits associated with the Provo shoreline, Pleistocene Lake Bonneville, Utah Stratigraphy and chronology of offshore to nearshore deposits associated with the Provo shoreline, Pleistocene Lake Bonneville, Utah

Stratigraphic descriptions and radiocarbon data from eleven field locations are presented in this paper to establish a chronostratigraphic framework for offshore to nearshore deposits of Lake Bonneville. Based on key marker beds and geomorphic position, the deposits are interpreted to have accumulated during the period from the late transgressive phase, through the overflowing phase...
Authors
Holly S. Godsey, Charles G. Oviatt, David M. Miller, Marjorie A. Chan

Reducing cement's CO2 footprint Reducing cement's CO2 footprint

The manufacturing process for Portland cement causes high levels of greenhouse gas emissions. However, environmental impacts can be reduced by using more energy-efficient kilns and replacing fossil energy with alternative fuels. Although carbon capture and new cements with less CO2 emission are still in the experimental phase, all these innovations can help develop a cleaner cement...
Authors
Hendrik G. van Oss
Was this page helpful?