# Moment magnitude, Richter scale - what are the different magnitude scales, and why are there so many?

Earthquake size, as measured by the Richter Scale is a well known, but not well understood, concept. The idea of a logarithmic earthquake magnitude scale was first developed by Charles Richter in the 1930's for measuring the size of earthquakes occurring in southern California using relatively high-frequency data from nearby seismograph stations. This magnitude scale was referred to as ML, with the L standing for local. This is what was to eventually become known as the Richter magnitude.

As more seismograph stations were installed around the world, it became apparent that the method developed by Richter was strictly valid only for certain frequency and distance ranges. In order to take advantage of the growing number of globally distributed seismograph stations, new magnitude scales that are an extension of Richter's original idea were developed. These include body wave magnitude (Mb) and surface wave magnitude (Ms). Each is valid for a particular frequency range and type of seismic signal. In its range of validity, each is equivalent to the Richter magnitude.

Because of the limitations of all three magnitude scales (ML, Mb, and Ms), a new, more uniformly applicable extension of the magnitude scale, known as moment magnitude, or Mw, was developed. In particular, for very large earthquakes, moment magnitude gives the most reliable estimate of earthquake size.

Moment is a physical quantity proportional to the slip on the fault multiplied by the area of the fault surface that slips; it is related to the total energy released in the earthquake. The moment can be estimated from seismograms (and also from geodetic measurements). The moment is then converted into a number similar to other earthquake magnitudes by a standard formula. The result is called the moment magnitude. The moment magnitude provides an estimate of earthquake size that is valid over the complete range of magnitudes, a characteristic that was lacking in other magnitude scales.

## Related Content

Filter Total Items: 10

### What is a Geoid? Why do we use it and where does its shape come from?

Contrast of the Geoid model with an Ellipsoid and cross-section of the Earth's surface. (Public domain.) A geoid is the irregular-shaped “ball” that scientists use to more accurately calculate depths of earthquakes, or any other deep object beneath the earth’s surface...

### Seismometers, seismographs, seismograms - what's the difference? How do they work?

A seismometer is the internal part of the seismograph , which may be a pendulum or a mass mounted on a spring; however, it is often used synonymously with "seismograph". Seismographs are instruments used to record the motion of the ground during an earthquake. They are installed in the ground throughout the world and operated as part of a...

### How can I make my own seismometer?

It is relatively easy to acquire the necessary materials and build your own seismometer. The links here are to various sources with information on how to build a seismometer. They range from very simple and inexpensive to sophisticated and pricey. Model Seismograph - Classroom Demonstration Build your own Seismograph Station Build Your Own...

### What was the first instrument that actually recorded an earthquake?

The earliest seismoscope was invented by the Chinese philosopher Chang Heng in A.D. 132. This was a large urn on the outside of which were eight dragon heads facing the eight principal directions of the compass. Below each dragon head was a toad with its mouth opened toward the dragon. When an earthquake occurred, one or more of the eight dragon-...

### How can an earthquake have a negative magnitude?

Magnitude calculations are based on a logarithmic scale, so a ten-fold drop in amplitude decreases the magnitude by 1. If an amplitude of 20 millimetres as measured on a seismic signal corresponds to a magnitude 2 earthquake, then: 10 times less (2 millimetres) corresponds to a magnitude of 1; 100 times less (0.2 millimetres) corresponds to...

### What does it mean that the earthquake occurred at a depth of 0 km? How can an earthquake have a negative depth; that would mean it’s in the air. What is the geoid, and what does it have to do with earthquake depth?

An earthquake cannot physically occur at a depth of 0 km or -1km (above the surface of the earth). In order for an earthquake to occur, two blocks of crust must slip past one another, and it is impossible for this to happen at or above the surface of the earth. So why do we report that the earthquake occurred at a depth of 0 km or event as a...

### How do seismologists locate an earthquake?

When an earthquake occurs, one of the first questions is "where was it?" The location may tell us what fault it was on and where damage (if any) most likely occurred. Unfortunately, Earth is not transparent and we can't just see or photograph the earthquake disturbance like meteorologists can photograph clouds. When an earthquake occurs, it...

### How are earthquakes recorded? How are earthquakes measured? How is the magnitude of an earthquake determined?

Earthquakes are recorded by a seismographic network . Each seismic station in the network measures the movement of the ground at that site. The slip of one block of rock over another in an earthquake releases energy that makes the ground vibrate. That vibration pushes the adjoining piece of ground and causes it to vibrate, and thus the energy...

### What is the difference between earthquake magnitude and earthquake intensity? What is the Modified Mercalli Intensity Scale?

Magnitude scales , like the moment magnitude, measure the size of the earthquake at its source. An earthquake has one magnitude. The magnitude does not depend on where the measurement is made. Often, several slightly different magnitudes are reported for an earthquake. This happens because the relation between the seismic measurements and the...

### How do you determine the magnitude for an earthquake that occurred prior to the creation of the magnitude scale?

For earthquakes that occurred between about 1890 (when modern seismographs came into use) and 1935 when Charles Richter developed the magnitude scale, people went back to the old records and compared the seismograms from those days with similar records for later earthquakes. For earthquakes prior to about 1890, magnitudes have been estimated by...
Filter Total Items: 3
Date published: May 25, 2017

### Updated USGS Earthquake Monitoring Strategy Released

The USGS Earthquake Hazards Program recently released a new strategic plan for earthquake monitoring entitled the “Advanced National Seismic System – Current Status, Development Opportunities, Priorities, 2017-2027.”

Date published: January 23, 2012

### A 100-year-long History of Earthquakes and Seismic Monitoring in Hawaii

The Hawaiian Volcano Observatory’s 1912–2012 Centennial—100 Years of Tracking Eruptions and Earthquakes

HAWAI‘I ISLAND, Hawaii —The history of earthquakes and seismic monitoring in Hawai‘i during the past century will be the topic of a presentation at the University of Hawai‘i at Hilo on Thursday, January 26, at 7:00 p.m.

Date published: September 24, 2009

### Recovery Act Funds Will Upgrade Earthquake Monitoring

USGS will Grant Universities $5 Million to Beef Up Public Safety Grants totaling$5 million under the American Recovery and Reinvestment Act are being awarded to 13 universities nationwide to upgrade critical earthquake monitoring networks and increase public safety.

Filter Total Items: 7
December 31, 2017

### California Seismicity

Map of historic seismicity, major faults, and paleoseismic summary of San Andreas Fault system.

August 31, 2016

### Cumulative number of earthquakes with a magnitude of 3.0 or larger in the central and eastern United States, 1973-2014

Cumulative number of earthquakes with a magnitude of 3.0 or larger in the central and eastern United States, 1973-2014. The rate of earthquakes began to increase starting around 2009 and accelerated in 2013-2014.

### 2014 National Seismic Hazard Map

2014 U.S. seismic hazard map showing the earthquake peak ground acceleration (PGA) that has a 2% chance of being exceeded in 50 years. Red indicates the highest hazard, and gray indicates the lowest hazard.

### Eastern Earthquakes

This map shows earthquakes above magnitude 4.0 in the eastern United States since 1973, the first year with a complete catalog. There are 184 earthquakes recorded. An earthquake of magnitude 4.0 or greater can cause minor or more significant damage. The circle sizes correspond to earthquake magnitude, ranging from 4.0 to 5.9 (the largest was in the Gulf of Mexico).