Skip to main content
U.S. flag

An official website of the United States government

Projected responses of the coastal water table for California using present-day and future sea-level rise scenarios

October 5, 2020

Coastal groundwater levels (heads) can increase with sea level rise (SLR) where shallow groundwater floats on underlying seawater. In some areas coastal groundwater could rise almost as much as SLR, but where rising groundwater intersects surface drainage features, the increase will be less. Numerical modeling can provide insight into coastal areas that may be more or less vulnerable to hazards associated with SLR-driven groundwater shoaling (moving closer to the ground surface) and emergence (flooding the ground surface), providing coastal planners with critical information that can be used to increase public safety, mitigate physical damages, and more effectively manage and allocate resources in complex coastal settings. Seamless unconfined groundwater heads for coastal California groundwater systems were modeled with homogeneous, steady-state MODFLOW simulations. The geographic extent examined was limited primarily to low-elevation (land surface less than approximately 10 m above mean sea level) areas. In areas where coastal elevations increase rapidly (e.g., bluff stretches), the model boundary was set approximately 1 kilometer inland of the present-day shoreline. Steady-state MODFLOW groundwater flow models were used to obtain detailed (10-meter-scale) predictions over large geographic scales (100s of kilometers) of groundwater heads for both current and future sea-level rise (SLR) scenarios (0 to 2 meters (m) in 0.25 m increments, 2.5 m, 3 m, and 5 m) using a range of horizontal hydraulic conductivity (Kh) scenarios (0.1, 1, and 10 m/day). For each SLR/Kh combination, results are provided for two marine boundary conditions; local mean sea level (LMSL) and mean higher-high water (MHHW), and for two model versions. In the first model version, groundwater reaching the land surface is removed from the model, simulating loss via natural drainage. In the second model version, SLR impacts are modeled by simply raising the present-day (SLR 0m) modeled groundwater head by the amount of sea-level rise, simulating the worst-case "linear" response to sea-level rise. Modeled groundwater heads were then subtracted from high-resolution topographic digital elevation model (DEM) data to obtain water table depths. Groundwater head and water table depths are presented in raster GeoTIFF format. Polygon shapefiles also present water table depths by depth range (emergent, 0 to 1, 1 to 2, 2 to 5, and greater than 5 meters depth). All results are presented by County.

Publication Year 2020
Title Projected responses of the coastal water table for California using present-day and future sea-level rise scenarios
DOI 10.5066/P9H5PBXP
Authors Kevin M. Befus, Patrick Barnard, Daniel J Hoover, Li Erikson
Product Type Data Release
Record Source USGS Digital Object Identifier Catalog
USGS Organization Pacific Coastal and Marine Science Center