Publications

The multichannel analysis of surface waves (MASW) seismic method was used to delineate a fault zone and gently dipping sedimentary bedrock at a site overlain by several meters of regolith. Seismic data were collected rapidly and inexpensively using a towed 30-channel land streamer and a rubberband-accelerated weight-drop seismic source. Data processed using the MASW method imaged the...

We are pleased to have the opportunity to discuss further what we think are important methods and results presented by Barlebo et al. [2004]. We are especially pleased to enter into a public discussion with four scientists who we regard with such high esteem concerning an important topic of mutual interest.

Aquifer-ocean interaction, saline intrusion, and submarine groundwater discharge (SGD) are emerging topics in hydrology and oceanography with important implications for water-resource management and estuarine ecology. Although the threat of saltwater intrusion has long been recognized in coastal areas, SGD has, until recently, received much less attention. It is clear that SGD...

Ground penetrating radar is an efficient geophysical method for the detection and location of fractures and fracture zones in electrically resistive rocks. In this study, the use of down-hole (borehole) radar reflection logs to monitor the injection of steam in fractured rocks was tested as part of a field-scale, steam-enhanced remediation pilot study conducted at a fractured limestone...

No abstract available.

An advantage of using optimization for model development and calibration is that optimization provides methods for evaluating and quantifying prediction uncertainty. Both deterministic and statistical methods can be used. Guideline 13 discusses using regression and post-audits, which we classify as deterministic methods. Guideline 14 discusses inferential statistics and Monte Carlo...

The methods presented in Chapters 3 to 8 are applicable to models of any system. However, there are special considerations when applying the methods to certain types of models. This chapter discusses three types of models that are of special interest to many scientific and engineering fields: transient models, transport models, and existing models that are to be recalibrated.

No abstract available.

The U.S. Geological Survey, in cooperation with the University of Connecticut, used a suite of hydraulic methods to characterize the hydrogeology of a fractured-rock aquifer near the former landfill and chemical-waste disposal pits at the University of Connecticut, Storrs, Connecticut. Multiple methods were used to determine head, driving potential, and transmissivity, including manual...

In December 2003, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, collected borehole-radar reflection logs in two boreholes in Machiasport, Maine. These bedrock boreholes were drilled as part of a hydrogeologic investigation of the area surrounding the former Air Force Radar Tracking Station site on Howard Mountain near Bucks Harbor. The boreholes, MW09...

An integrated borehole-geophysical and hydraulic investigation was conducted at the former landfill area near the University of Connecticut in Storrs, Connecticut, where solvents and landfill leachate have contaminated a fractured-bedrock aquifer. Borehole-geophysical techniques and hydraulic methods were used to characterize the site bedrock lithology and structure, fractures, and...

Surface-geophysical surveys were conducted in February 2003 at a formerly used defense site in Maine, where residual chlorinated solvents are affecting off-site domestic water-supply wells. The U.S. Geological Survey and Argonne National Laboratory used surface-geophysical methods, including ground-penetrating radar and seismic-refraction tomography, to characterize the lithology and...