Skip to main content
U.S. flag

An official website of the United States government

Publications

Filter Total Items: 185

The effect of variations in relative spectral response on the retrieval of land surface parameters from multiple sources of remotely sensed imagery The effect of variations in relative spectral response on the retrieval of land surface parameters from multiple sources of remotely sensed imagery

Airborne visible infrared imaging spectrometer (AVIRIS) images, collected over Sioux Falls, South Dakota, were used to quantify the effect of spectral response on different surface materials and to develop spectral "figures-of-merit" for spectral responses covering similar, but not identical spectral bands. In this simulation, AVIRIS images were converted to radiance, then spectrally...
Authors
D. J. Meyer, G. Chander

Preliminary radiometric calibration assessment of ALOS AVNIR-2 Preliminary radiometric calibration assessment of ALOS AVNIR-2

This paper summarizes the activities carried out in the frame of the data quality activities of the Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2) sensor onboard the Advanced Land Observing Satellite (ALOS). Assessment of the radiometric calibration of the AVNIR-2 multi-spectral imager is achieved via three intercomparisons to currently flying sensors over the Libyan...
Authors
M. Bouvet, P. Goryl, G. Chander, R. Santer, S. Saunier

Geometric correction and digital elevation extraction using multiple MTI datasets Geometric correction and digital elevation extraction using multiple MTI datasets

Digital Elevation Models (DEMs) are traditionally acquired from a stereo pair of aerial photographs sequentially captured by an airborne metric camera. Standard DEM extraction techniques can be naturally extended to satellite imagery, but the particular characteristics of satellite imaging can cause difficulties. The spacecraft ephemeris with respect to the ground site during image...
Authors
Jeffrey A. Mercier, Robert A. Schowengerdt, James C. Storey, Jody L. Smith

Cross-calibration of the Terra MODIS, Landsat 7 ETM+ and EO-1 ALI sensors using near-simultaneous surface observation over the Railroad Valley Playa, Nevada, test site Cross-calibration of the Terra MODIS, Landsat 7 ETM+ and EO-1 ALI sensors using near-simultaneous surface observation over the Railroad Valley Playa, Nevada, test site

A cross-calibration methodology has been developed using coincident image pairs from the Terra Moderate Resolution Imaging Spectroradiometer (MODIS), the Landsat 7 (L7) Enhanced Thematic Mapper Plus (ETM+) and the Earth Observing EO-1 Advanced Land Imager (ALI) to verify the absolute radiometric calibration accuracy of these sensors with respect to each other. To quantify the effects due...
Authors
G. Chander, A. Angal, T. Choi, D. J. Meyer, X. Xiong, P.M. Teillet

USGS QA Plan: Certification of digital airborne mapping products USGS QA Plan: Certification of digital airborne mapping products

To facilitate acceptance of new digital technologies in aerial imaging and mapping, the US Geological Survey (USGS) and its partners have launched a Quality Assurance (QA) Plan for Digital Aerial Imagery. This should provide a foundation for the quality of digital aerial imagery and products. It introduces broader considerations regarding processes employed by aerial flyers in collecting
Authors
J. Christopherson

Improved outgassing models for the Landsat-5 thematic mapper Improved outgassing models for the Landsat-5 thematic mapper

The Landsat-5 (L5) Thematic Mapper (TM) detectors of the short wave infrared (SWIR) bands 5 and 7 are maintained on cryogenic temperatures to minimize thermal noise and allow adequate detection of scene energy. Over the instrument's lifetime, gain oscillations are observed in these bands that are caused by an ice-like contaminant that gradually builds up on the window of a dewar that...
Authors
E. Micijevic, G. Chander, R. W. Hayes

Radiometric calibration status of Landsat-7 and Landsat-5 Radiometric calibration status of Landsat-7 and Landsat-5

Launched in April 1999, Landsat-7 ETM+ continues to acquire data globally. The Scan Line Corrector in failure in 2003 has affected ground coverage and the recent switch to Bumper Mode operations in April 2007 has degraded the internal geometric accuracy of the data, but the radiometry has been unaffected. The best of the three on-board calibrators for the reflective bands, the Full...
Authors
J. A. Barsi, B. L. Markham, D. L. Helder, G. Chander

Revised landsat-5 thematic mapper radiometric calibration Revised landsat-5 thematic mapper radiometric calibration

Effective April 2, 2007, the radiometric calibration of Landsat-5 (L5) Thematic Mapper (TM) data that are processed and distributed by the U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) will be updated. The lifetime gain model that was implemented on May 5, 2003, for the reflective bands (1-5, 7) will be replaced by a new lifetime radiometric...
Authors
G. Chander, B. L. Markham, J. A. Barsi

Online catalog of world-wide test sites for the post-launch characterization and calibration of optical sensors Online catalog of world-wide test sites for the post-launch characterization and calibration of optical sensors

In an era when the number of Earth-observing satellites is rapidly growing and measurements from these sensors are used to answer increasingly urgent global issues, it is imperative that scientists and decision-makers rely on the accuracy of Earth-observing data products. The characterization and calibration of these sensors are vital to achieve an integrated Global Earth Observation...
Authors
G. Chander, J.B. Christopherson, G. L. Stensaas, P.M. Teillet

Canadian and U.S. Cooperation for the development of standards and specifications for emerging mapping technologies Canadian and U.S. Cooperation for the development of standards and specifications for emerging mapping technologies

The mapping community is witnessing significant advances in available sensors, such as medium format digital cameras (MFDC) and Light Detection and Ranging (LiDAR) systems. In this regard, the Digital Photogrammetry Research Group (DPRG) of the Department of Geomatics Engineering at the University of Calgary has been actively involved in the development of standards and specifications...
Authors
A. Habib, A. Jarvis, M. M. Al-Durgham, J. Lay, P. Quackenbush, G. Stensaas, D. Moe

Prime candidate earth targets for the post-launch radiometric calibration of space-based optical imaging instruments Prime candidate earth targets for the post-launch radiometric calibration of space-based optical imaging instruments

This paper provides a comprehensive list of prime candidate terrestrial targets for consideration as benchmark sites for the post-launch radiometric calibration of space-based instruments. The key characteristics of suitable sites are outlined primarily with respect to selection criteria, spatial uniformity, and temporal stability. The establishment and utilization of such benchmark...
Authors
P.M. Teillet, J. A. Barsi, G. Chander, K. J. Thome

Comparison of outgassing models for the Landsat thematic mapper sensors Comparison of outgassing models for the Landsat thematic mapper sensors

The Thematic Mapper (TM) is a multi-spectral electro-optical sensor featured onboard both the Landsat 4 (L4) and Landsat 5 (L5) satellites. TM sensors have seven spectral bands with center wavelengths of approximately 0.49, 0.56, 0.66, 0.83, 1.65, 11.5 and 2.21 μm, respectively. The visible near-infrared (VNIR) bands are located on the primary focal plane (PFP), and two short-wave...
Authors
E. Micijevic, G. Chander
Was this page helpful?