Publications
Browse recent USGS publications related to energy resources.
Filter Total Items: 2852
Paleogeographic insights based on new U-Pb dates for altered tuffs in the Miocene Barstow Formation, California Paleogeographic insights based on new U-Pb dates for altered tuffs in the Miocene Barstow Formation, California
The type section of the Barstow Formation in the Mud Hills, north of Barstow, is a reference section for early to middle Miocene paleontology, magnetostratigraphy, and dated volcanic episodes. Thanks to this robust chronologic framework, much of the interpretation of the paleogeography of the region from about 18 Ma to 13 Ma is based on study of the rocks in the Mud Hills. Eastward from...
Authors
David M. Miller, Jose E. Rosario, Shannon R. Leslie, Jorge A. Vazquez
Field guide to selected sites along the Idaho Cobalt Belt (ICB) and to the Beartrack Gold Deposit, in the eastern Salmon River Mountains Field guide to selected sites along the Idaho Cobalt Belt (ICB) and to the Beartrack Gold Deposit, in the eastern Salmon River Mountains
This field guide provides a road log to and geologic descriptions of selected sites in the Idaho cobalt belt, and at the Beartrack gold mine, in the eastern Salmon River Mountains.
Authors
Arthur A. Bookstrom, George King, Robert A. Perry, John Childs
Unique challenges facing Southwestern tribes: Chapter 17 Unique challenges facing Southwestern tribes: Chapter 17
Executive Summary When considering climate change, risks to Native American lands, people, and cultures are noteworthy. Impacts on Native lands and communities are anticipated to be both early and severe due to their location in marginal environments. Because Native American societies are socially, culturally, and politically unique, conventional climate change adaptation planning and...
Authors
Margaret Hiza, Karletta Chief, Kirk Bemis, Mahesh Gautam, Beth Rose Middleton, Rebecca Tsosie
Monte Carlo simulations of product distributions and contained metal estimates Monte Carlo simulations of product distributions and contained metal estimates
Estimation of product distributions of two factors was simulated by conventional Monte Carlo techniques using factor distributions that were independent (uncorrelated). Several simulations using uniform distributions of factors show that the product distribution has a central peak approximately centered at the product of the medians of the factor distributions. Factor distributions that...
Authors
Mark E. Gettings
Review of oil families and their petroleum systems of the Williston Basin Review of oil families and their petroleum systems of the Williston Basin
The petroleum system concept was first applied in 1974 (Dow/Williams) to identify three oil systems in the Williston Basin, and recent studies have expanded the number to at least nine. This paper reviews the petroleum geochemistry, oil-oil, and oil-source correlations of the oil systems of the Williston Basin, providing a new perspective and some new findings. Petroleum systems with a...
Authors
Paul G. Lillis
Supporting data for the U.S. Geological Survey 2012 world assessment of undiscovered oil and gas resources Supporting data for the U.S. Geological Survey 2012 world assessment of undiscovered oil and gas resources
This report provides information pertaining to the 2012 U.S. Geological Survey assessment of undiscovered, technically recoverable conventional oil and gas resources of the world, exclusive of the United States. Some of the results were previously published, mostly in USGS fact sheet series.
Authors
USGS World Conventional Resources Assessment Team
U.S. Geological Survey Energy and Minerals science strategy: A resource lifecycle approach U.S. Geological Survey Energy and Minerals science strategy: A resource lifecycle approach
Authors
Richard C. Ferrero, Jonathan J. Kolak, Donald J. Bills, Zachary H. Bowen, Daniel J. Cordier, Tanya J. Gallegos, James R. Hein, Karen D. Kelley, Philip H. Nelson, Vito F. Nuccio, Jeanine M. Schmidt, Robert R. Seal
Methods to assess geological CO2 storage capacity: Status and best practice Methods to assess geological CO2 storage capacity: Status and best practice
To understand the emission reduction potential of carbon capture and storage (CCS), decision makers need to understand the amount of CO2 that can be safely stored in the subsurface and the geographical distribution of storage resources. Estimates of storage resources need to be made using reliable and consistent methods. Previous estimates of CO2 storage potential for a range of...
Authors
Wolf Heidug, Sean T. Brennan, Sam Holloway, Peter D. Warwick, Sean McCoy, Tsukasa Yoshimura
Geologic assessment of undiscovered oil and gas resources: Oligocene Frio and Anahuac Formations, United States Gulf of Mexico coastal plain and State waters Geologic assessment of undiscovered oil and gas resources: Oligocene Frio and Anahuac Formations, United States Gulf of Mexico coastal plain and State waters
The Oligocene Frio and Anahuac Formations were assessed as part of the 2007 U.S. Geological Survey (USGS) assessment of Tertiary strata of the U.S. Gulf of Mexico Basin onshore and State waters. The Frio Formation, which consists of sand-rich fluvio-deltaic systems, has been one of the largest hydrocarbon producers from the Paleogene in the Gulf of Mexico. The Anahuac Formation, an...
Authors
Sharon M. Swanson, Alexander W. Karlsen, Brett J. Valentine
An effective noise-suppression technique for surface microseismic data An effective noise-suppression technique for surface microseismic data
The presence of strong surface-wave noise in surface microseismic data may decrease the utility of these data. We implement a technique, based on the distinct characteristics that microseismic signal and noise show in the τ‐p domain, to suppress surface-wave noise in microseismic data. Because most microseismic source mechanisms are deviatoric, preprocessing is necessary to correct for...
Authors
Farnoush Forghani-Arani, Mark Willis, Seth S. Haines, Mike Batzle, Jyoti Behura, Michael Davidson
Blind test of methods for obtaining 2-D near-surface seismic velocity models from first-arrival traveltimes Blind test of methods for obtaining 2-D near-surface seismic velocity models from first-arrival traveltimes
Seismic refraction methods are used in environmental and engineering studies to image the shallow subsurface. We present a blind test of inversion and tomographic refraction analysis methods using a synthetic first-arrival-time dataset that was made available to the community in 2010. The data are realistic in terms of the near-surface velocity model, shot-receiver geometry and the data...
Authors
Colin A. Zelt, Seth Haines, Michael H. Powers, Jacob Sheehan, Siegfried Rohdewald, Curtis Link, Koichi Hayashi, Don Zhao, Hua-wei Zhou, Bethany L. Burton, Uni K. Petersen, Nedra D. Bonal, William E. Doll
Hysteresis of unsaturated hydromechanical properties of a silty soil Hysteresis of unsaturated hydromechanical properties of a silty soil
Laboratory tests to examine hysteresis in the hydrologic and mechanical properties of partially saturated soils were conducted on six intact specimens collected from a landslide-prone area of Alameda County, California. The results reveal that the pore-size distribution parameter remains statistically unchanged between the wetting and drying paths; however, the wetting or drying state...
Authors
Ning Lu, Murat Kaya, Brian D. Collins, Jonathan W. Godt