Publications
Filter Total Items: 7511
Probabilistic Relationships between Ground‐Motion Parameters and Modified Mercalli Intensity in California Probabilistic Relationships between Ground‐Motion Parameters and Modified Mercalli Intensity in California
We use a database of approximately 200,000 modified Mercalli intensity (MMI) observations of California earthquakes collected from USGS "Did You Feel It?" (DYFI) reports, along with a comparable number of peak ground-motion amplitudes from California seismic networks, to develop probabilistic relationships between MMI and peak ground velocity (PGV), peak ground acceleration (PGA), and 0...
Authors
C.B. Worden, David J. Wald, D.A. Rhoades
VS30 – A site-characterization parameter for use in building Codes, simplified earthquake resistant design, GMPEs, and ShakeMaps VS30 – A site-characterization parameter for use in building Codes, simplified earthquake resistant design, GMPEs, and ShakeMaps
VS30, defined as the average seismic shear-wave velocity from the surface to a depth of 30 meters, has found wide-spread use as a parameter to characterize site response for simplified earthquake resistant design as implemented in building codes worldwide. VS30 , as initially introduced by the author for the US 1994 NEHRP Building Code, provides unambiguous definitions of site classes...
Authors
Roger D. Borcherdt
Assessing the validity of station location assumptions made in the calculation of the geomagnetic disturbance index, Dst Assessing the validity of station location assumptions made in the calculation of the geomagnetic disturbance index, Dst
In this paper, the effects of the assumptions made in the calculation of the Dst index with regard to longitude sampling, hemisphere bias, and latitude correction are explored. The insights gained from this study will allow operational users to better understand the local implications of the Dst index and will lead to future index formulations that are more physically motivated. We...
Authors
Jennifer Gannon
Modeling the formation of porphyry-copper ores Modeling the formation of porphyry-copper ores
Porphyry-copper ore systems, the source of much of the world's copper and molybdenum, form when metal-bearing fluids are expelled from shallow, degassing magmas. On page 1613 of this issue, Weis et al. (1) demonstrate that self-organizing processes focus metal deposition. Specifically, their simulation studies indicate that ores develop as consequences of dynamic variations in rock...
Authors
Steven E. Ingebritsen
Golden Gate Bridge response: a study with low-amplitude data from three earthquakes Golden Gate Bridge response: a study with low-amplitude data from three earthquakes
The dynamic response of the Golden Gate Bridge, located north of San Francisco, CA, has been studied previously using ambient vibration data and finite element models. Since permanent seismic instrumentation was installed in 1993, only small earthquakes that originated at distances varying between ~11 to 122 km have been recorded. Nonetheless, these records prompted this study of the...
Authors
Mehmet Çelebi
Earthquake studies reveal the magmatic plumbing system of the Katmai volcanoes Earthquake studies reveal the magmatic plumbing system of the Katmai volcanoes
The 1912 eruption of Novarupta was the largest of the 1900s (Fierstein and Hildreth 2001, Hildreth et al. 2003). A century later, fundamental questions remain regarding the source of the magma for that eruption. A previous seismic study of the Katmai area (Jolly et al. 2007) identified a single large area of anomalous structure in the subsurface centered beneath Katmai Pass (Figure 2)...
Authors
Clifford Thurber, Rachel Murphy, Stephanie G. Prejean, Matthew M. Haney, Ninfa Bennington, Lee Powell, John F. Paskievitch
Photometric properties of Vesta Photometric properties of Vesta
The Dawn spacecraft orbited Asteroid (4) Vesta for a year, and returned disk-resolved images and spectra covering visible and near-infrared wavelengths at scales as high as 20 m/pix. The visible geometric albedo of Vesta is ~ 0.36. The disk-integrated phase function of Vesta in the visible wavelengths derived from Dawn approach data, previous ground-based observations, and Rosetta OSIRIS
Authors
Jian-Yang Li, Timothy N. Titus
Should ground-motion records be rotated to fault-normal/parallel or maximum direction for response history analysis of buildings? Should ground-motion records be rotated to fault-normal/parallel or maximum direction for response history analysis of buildings?
In the United States, regulatory seismic codes (for example, California Building Code) require at least two sets of horizontal ground-motion components for three-dimensional (3D) response history analysis (RHA) of building structures. For sites within 5 kilometers (3.1 miles) of an active fault, these records should be rotated to fault-normal and fault-parallel (FN/FP) directions, and...
Authors
Juan C. Reyes, Erol Kalkan
Earthquake recurrence models fail when earthquakes fail to reset the stress field Earthquake recurrence models fail when earthquakes fail to reset the stress field
Parkfield's regularly occurring M6 mainshocks, about every 25 years, have over two decades stoked seismologists' hopes to successfully predict an earthquake of significant size. However, with the longest known inter-event time of 38 years, the latest M6 in the series (28 Sep 2004) did not conform to any of the applied forecast models, questioning once more the predictability of...
Authors
Thessa Tormann, Stefan Wiemer, Jeanne L. Hardebeck
Analysis of rainfall-induced slope instability using a field of local factor of safety Analysis of rainfall-induced slope instability using a field of local factor of safety
Slope-stability analyses are mostly conducted by identifying or assuming a potential failure surface and assessing the factor of safety (FS) of that surface. This approach of assigning a single FS to a potentially unstable slope provides little insight on where the failure initiates or the ultimate geometry and location of a landslide rupture surface. We describe a method to quantify a...
Authors
Ning Lu, Başak Şener-Kaya, Alexandra Wayllace, Jonathan W. Godt
Characterization of previously unidentified lunar pyroclastic deposits using Lunar Reconnaissance Orbiter Camera (LROC) data Characterization of previously unidentified lunar pyroclastic deposits using Lunar Reconnaissance Orbiter Camera (LROC) data
We used a Lunar Reconnaissance Orbiter Camera (LROC) global monochrome Wide-angle Camera (WAC) mosaic to conduct a survey of the Moon to search for previously unidentified pyroclastic deposits. Promising locations were examined in detail using LROC multispectral WAC mosaics, high-resolution LROC Narrow Angle Camera (NAC) images, and Clementine multispectral (ultraviolet-visible or UVVIS)...
Authors
J. Olaf Gustafson, James F. Bell, Lisa R. Gaddis, B. Ray Hawke, Thomas A. Giguere
Interdisciplinary research produces results in understanding planetary dunes Interdisciplinary research produces results in understanding planetary dunes
Third International Planetary Dunes Workshop: Remote Sensing and Image Analysis of Planetary Dunes; Flagstaff, Arizona, 12–16 June 2012. This workshop, the third in a biennial series, was convened as a means of bringing together terrestrial and planetary researchers from diverse backgrounds with the goal of fostering collaborative interdisciplinary research. The small-group setting...
Authors
Timothy N. Titus, Rosalyn K. Hayward, Cynthia L. Dinwiddie