Publications

Gas hydrates possess lower electrical conductivity (inverse of resistivity) than either seawater or ice, but higher than clastic silts and sands, such that electromagnetic methods can be employed to help identify their natural formation in marine and permafrost environments. Controlled laboratory studies offer a means to isolate and quantify the effects of changing individual components...

Seismic signals from ocean-solid Earth interactions are ubiquitously recorded on our planet. However, these wavefields are typically incoherent in most frequency bands limiting their utilization for understanding ocean dynamics or solid Earth properties. In contrast, we find that during large storms such as hurricanes and Nor’easters the interaction of long-period ocean waves with...

The association of seismic‐wave arrivals with causative earthquakes becomes progressively more challenging as arrival detection methods become more sensitive, and particularly when earthquake rates are high. For instance, seismic waves arriving across a monitoring network from several sources may overlap in time, false arrivals may be detected, and some arrivals may be of unknown phase...

India’s National Gas Hydrate Program Expedition 02 (NGHP-02), was conducted to better understand geologic controls on gas hydrate occurrence and morphology, targeting potentially coarse-grained sediments near the base of the continental slope offshore eastern India. This study combines seismic, logging-while-drilling data, and a petroleum systems approach to provide a regional geologic...

Earthquake swarms, typically modeled as time-varying changes in background seismicity that are driven by external processes such as fluid flow or aseismic creep, present challenges for operational earthquake forecasting. While the time decay of aftershock sequences can be estimated with the modified Omori law, it is difficult to forecast the temporal behavior of seismicity rates during a...

In engineering seismology, the time‐averaged shear‐wave velocity (⁠VS⁠) of the upper 30 m of the crust (⁠VS30⁠) is the primary parameter used in ground‐motion models to predict seismic site effects. ⁠VS30⁠ is typically derived from in situ recordings of VS⁠, although proxy‐based approaches (using geologic and/or geomorphometric classifications) are provisionally adopted when measurement...

Whether large and very large earthquakes are distinguishable from each other early on in the rupture process has been a subject often debated over the past several decades. Studies have shown that the frequency content of radiated seismic energy in the first few seconds of an earthquake scales with the final magnitude of the event, implying determinism. Other studies have shown that the...

The U.S. Geological Survey National Earthquake Information Center leads real-time efforts to provide rapid and accurate assessments of the impacts of global earthquakes, including estimates of ground shaking, ground failure, and the resulting human impacts. These efforts primarily rely on analysis of the seismic wavefield to characterize the source of the earthquake, which in turn...

Executive Summary Damaging earthquakes occur regularly around the world; since the turn of the 20th century, hundreds of earthquakes have caused significant loss of life and (or) millions of dollars or more in economic losses. While most of these did not directly affect the United States and its Territories, by studying worldwide seismicity we can better understand how to mitigate the...

Ground-motion modeling requires accurate representation of the earthquake source, path, and site. Site amplification is often modeled by VS30, the time-averaged shear-wave velocity of the top 30 meters of the Earth’s surface, though recent studies find that its ability to accurately predict site effects varies. Another measure of the site is κ0, the attenuation of high frequency energy...

Regional networks of Global Navigation Satellite System (GNSS) stations cover seismically and volcanically active areas throughout the United States. Data from these networks have been used to produce high‐precision, three‐component velocity fields covering broad geographic regions as well as position time series that track time‐varying crustal deformation. This information has...

Over the past decade, Oklahoma became the most seismically active region of the mid-Continental USA as a result of industry operations. However, seismic network limitations and completeness of earthquake catalogs have restricted the types of analyses that can be performed. By applying multi-station template matching on the 23,889 cataloged earthquakes in Oklahoma and Southern Kansas...