FAQs
If you don't see your question below, please let us know and we'll be happy to help.
Current and historical streamflow, groundwater, and water quality data can be found at the National Water Information System (NWIS) site. To search geographically, use the NWIS Mapper feature.
The California Department of Water Resources is the official source of well completion reports.
Where can I find information about my local drinking water supply?
The best way to learn about your local drinking water quality is to read the annual drinking water quality report/consumer confidence report that water suppliers now send out by July 1 of each year. The reports are often sent out with water bills, but they may be sent separately. The reports tell where drinking water comes from, what contaminants are in it, and at what levels. The U.S...
Where can I get my well water tested?
Some counties offer free well water testing, so check with your county first. If they don't, use this EPA website to find a list of state-certified laboratories in your area that do water testing, or contact your county or state health department or your State Certification Officer for assistance. Prices will vary depending on the laboratory and the test(s), but most people consider the cost to be...
Where can I get real-time and historical streamflow information?
The best starting point for USGS streamflow data is the interactive National Water Information System (NWIS): Mapper website. Zoom in to your area of interest or use the search options in the left navigation window. The map displays active surface-water sites by default, but you can change the type of water site (surface-water, groundwater, springs, atmospheric) and select to show inactive sites...
How often are real-time streamflow data updated?
USGS real-time streamflow data are typically recorded at 15-minute intervals, stored onsite, and then transmitted to USGS offices once every hour, depending on the data relay technique used. Recording and transmission times might be more frequent during critical events (floods, for example). Data from current sites are relayed to USGS offices via satellite, telephone, and/or radio telemetry and...
How can I find the depth to the water table in a specific location?
The depth to the water table can change (rise or fall) depending on the time of year. During the late winter and spring when accumulated snow starts to melt and spring rainfall is plentiful, water on the surface infiltrates into the ground and the water table rises. When water-loving plants start to grow again in the spring and precipitation gives way to hot, dry summers, the water table falls...
Where can I find flood maps?
FEMA is the official public source for flood maps for insurance purposes: FEMA’s Flood Map Service Center FEMA’s National Flood Hazard Layer NOAA is responsible for producing flood forecast maps that combine precipitation data with USGS streamflow data: National Weather Service - Advanced Hydrologic Prediction Service River Forecasts Long-Range River Flood Risk Coastal Inundation Dashboard : Real...
How do we benefit from USGS streamgages?
Information on the flow of rivers is a vital national asset that safeguards lives, protects property, and ensures adequate water supplies for the future. The USGS is the federal agency responsible for operating a network of about 7,000 streamgages nationwide. Data from this network are used by water managers, emergency responders, utilities, environmental agencies, universities, consulting firms...
Does "stage" tell you how much water is flowing in a stream?
Not directly. You cannot say that because a stream rises (doubles) from a 10-foot stage to a 20-foot stage that the amount of flowing water also doubles. Think of a cereal bowl with a rounded bottom. Pour one inch of milk in it. It doesn't take much milk to make it up to the one inch level because the bowl is at its narrowest near the bottom. Now, pour in milk until it is two inches deep -- it...
How important is groundwater?
Groundwater, which is in aquifers below the surface of the Earth, is one of the Nation's most important natural resources. Groundwater is the source of about 37 percent of the water that county and city water departments supply to households and businesses (public supply). It provides drinking water for more than 90 percent of the rural population who do not get their water delivered to them from...
What determines if a well will go dry?
A well is said to have gone dry when water levels drop below a pump intake. This does not mean that a dry well will never have water in it again, as the water level may come back through time as recharge increases. The water level in a well depends on a number of things, such as the depth of the well, the type (confined or unconfined) of aquifer the well taps, the amount of pumping that occurs in...
How does an earthquake affect groundwater levels and water quality in wells?
Groundwater levels in wells can oscillate up and down when seismic waves pass. The water level might remain higher or lower for a period of time after the seismic waves end, but sometimes a long-term offset of groundwater levels follows an earthquake. The largest recorded earthquake-induced offset in a well is a one meter rise. Water quality can also be affected by earthquakes, typically in...
Does the use of pesticides affect our Nation's water quality?
Pesticide use in the United States has increased because not only must we supply our exploding population with food, but crops and food are also grown for export to other countries. The United States has become the largest producer of food products in the world, partly owing to our use of modern chemicals (pesticides) to control the insects, weeds, and other organisms that attack food crops. But...