Software

This repository contains the code needed to reproduce computations presented in Barnhart and others (under review). This readme contains instructions for reproducing results and a list of the git hashes for each source repository used. Computation for this manuscript was done on the U.S. Geological Survey Denali High Performance Computer (Falgout and others, 2024). Barnhart, K.R., George...

Digger is a python package that provides a number of pre- and post-processing tools for landslide runout modeling. Many aspects of digger have been tailored for use with the D-Claw model. It may also be useful for initializing and postprocessing the results of other runout models. D-Claw requires input files and generates output files in very specific formats. Simulation output generates...

This is version 1.1.0 of the Hydrologic Toolbox software.

Software program code for the AFCE (Aqueous Flow Concentration Estimator) that is used to estimate inflow of groundwater contaminants to a water column of an open borehole in a fractured-rock aquifer. It is particularly useful program for assessing ambient flow in low permeability open boreholes, which have no detectable flow as measured with conventional borehole flowmeter tools. The...

This software archive is superseded by Hydrologic Toolbox v1.1.0, available at the following citation: Barlow, P.M., McHugh, A.R., Kiang, J.E., Zhai, T., Hummel, P., Duda, P., and Hinz, S., 2024, U.S. Geological Survey Hydrologic Toolbox version 1.1.0 software archive: U.S. Geological Survey software release, https://doi.org/10.5066/P13VDNAK. The U.S. Geological Survey Hydrologic Toolbox...

Projects and apps to support computation of stream discharge using remotely-sensed satellite data. (RSQ, Remotely Sensed Discharge): altimDSWE: Shiny app tool to support development of relations between satellite altimetry and DSWE data RSQcomp: Shiny app tool for computing stream discharge using remotely sensed data

The Stochastic Empirical Loading and Dilution Model (SELDM) was developed by the U.S. Geological Survey (USGS), in cooperation with the Federal Highway Administration (FHWA) Office of Project Delivery and Environmental Review to transform complex scientific data into meaningful information about the risk of adverse effects of runoff on receiving waters, the potential need for mitigation...

The Best Management Practices Statistical Estimator (BMPSE) was developed by the U.S. Geological Survey (USGS), in cooperation with the Federal Highway Administration (FHWA) Office of Project Delivery and Environmental Review to provide planning-level information about the performance of structural best management practices for decision makers, planners, and highway engineers to assess...

Purge Analyzer Tool - For computation of in-well time of travel of groundwater under pumping conditions.

The InterpretSELDM program is a graphical post processor designed to facilitate analysis and presentation of stormwater modeling results from the Stochastic Empirical Loading and Dilution Model (SELDM), which is a stormwater model developed by the U.S. Geological Survey in cooperation with the Federal Highway Administration. SELDM simulates flows, concentrations, and loads in stormflows...

The Highway-Runoff Database (HRDB) was developed by the U.S. Geological Survey (USGS), in cooperation with the Federal Highway Administration (FHWA) Office of Project Delivery and Environmental Review to provide planning-level information for decision makers, planners, and highway engineers to assess and mitigate possible adverse effects of highway runoff on the Nation's receiving waters...

This software release provides the database application that runs the Massachusetts Sustainable-Yield Estimator (MA SYE) computer program (version 2.0). The MA SYE was developed by the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, to provide a planning-level decision-support tool designed to help decision makers estimate daily mean...